| Overview | Package | Class | Deprecated | Help |
| Properties | |
|---|---|
| assignedCardSubType |
type=equipment.CardSubType default=unspecified Displayed(tab/group)=Assigned Card Sub Type |
| cardAssignedLevel |
An integer that specifies the administratively assigned
(pre-provisioned) Card functional level variant that should occupy
this slot in this chassis.
type=equipment.CardLicenseFunctionalLevelType default=unrestricted Displayed(tab/group)=Licensed Assigned Level (/Licensing Details) |
| cardCapability |
type=equipment.CardCapabilities default=ess Displayed(tab/group)=Capability (/Card Capability) |
| cardEquippedLevel |
An integer that indicates the card functional-level variant that is
physically inserted into this slot in this chassis. If the value of
tmnxCardAssignedLevel is not equal to the value of
tmnxCardEquippedLevel, a mismatch alarm will be raised.
type=equipment.CardLicenseFunctionalLevelType access=read-only default=unrestricted Displayed(tab/group)=Licensed Equipped Level (/Licensing Details) |
| cardEthernetAdminStatus |
The card admin status for 11ope8 and 11qce12x.
type=equipment.EthernetCardAdminStatus default=accessUplink Displayed(tab/group)=Card Uplink Mode |
| cardHashSeedShift |
The value of CardHashSeedShift specifies the number of bits
the hash seed result is shifted. The hash seed result obtained by
shifting up to 16 bits is used by the hash polynomial
ecmpLoadBalancingHashPoly and lagLoadBalancingHashPoly,to optimize the load balancing distribution of packet flows
under ECMP and LAG.
type=int default=2 minimum=1 maximum=16 Displayed(tab/group)=LAG/ECMP Hash Seed Shift |
| cardLicensedBandwidth |
Indicates the amount of licensed bandwidth that is used on the
card for this slot in this chassis. Bandwidth becomes licensed as
physical connectors are provisioned or physical ports are enabled.
Licensed bandwith on cards that have multiple functional levels
supported. The system enforces that the licensed bandwidth does
not exceed any bandwidth restriction associated with this card's
licensed level.
type=int access=read-only default=0 units=Gbps Displayed(tab/group)=Licensed Bandwidth Used (/Licensing Details) |
| cardLicensedLevel |
An integer that indicates the card functional-level that is licensed
for this slot in this chassis.
type=equipment.CardLicenseFunctionalLevelType access=read-only default=unrestricted Displayed(tab/group)=Licensed Level (/Licensing Details) |
| cardPowerSave |
Specifies whether or not the system
prevents the card from loading and keeps it in a low power mode. If
the value of cardPowerSave is 'true (1)', the system will reset
the card and keep it in a low power mode.
The card must be 'shutdown' before setting power-save.
type=boolean default=false Displayed(tab/group)=Card Power Save |
| cardProtectionRowStatus |
type=equipment.ProtStatus default=active |
| cardProtectionType |
type=equipment.CardProtType default=noProtection Displayed(tab/group)=Protection Type (/Protection Type) |
| currentSwitchCommand |
type=equipment.Commands access=read-only default=noRequest Displayed(tab/group)=Current Command (/Protection Scheme Parameters) |
| equipment.BaseCard-Set |
type=Children-Set |
| equipment.CardComplexErrors-Set |
type=Children-Set |
| equipment.CardHwEvents-Set |
type=Children-Set |
| equipment.CardLevelUpgrade-Set |
type=Children-Set |
| equipment.CardUpgradeLicenseLevels-Set |
type=Children-Set |
| equipment.DryContact-Set |
type=Children-Set |
| equipment.FanTray-Set |
type=Children-Set |
| equipment.ForwardingPlane-Set |
type=Children-Set |
| equipment.HardwareEvents-Set |
type=Children-Set |
| equipment.NodeFeatureLicense-Set |
type=Children-Set |
| equipment.NodeLicense-Set |
type=Children-Set |
| equipment.PowerSupplyTray-Set |
type=Children-Set |
| equipment.ProcessorCard-Set |
type=Children-Set |
| equipment.VirtualSchedulerAdjustment-Set |
type=Children-Set |
| equippedCardSubType |
type=equipment.CardSubType access=read-only default=unspecified Displayed(tab/group)=Equipped Card Sub Type |
| failOnError |
type=equipment.FailOnError default=failOnErrorNotSet Displayed(tab/group)=Shutdown IOM/IMM for Memory Parity Errors (/Fail On Error) |
| mgGroupAssociation |
The ISA-MG Group the Base Card in this Slot is servicing. Only applies in the context of a
Serving or PDN Gateway.
type=long access=read-only default=0 Displayed(tab/group)=Serving EPC Instance (/Mobile Gateway) |
| mpr.AuxCardSpecifics-Set |
type=Children-Set |
| mpr.AuxInput-Set |
type=Children-Set |
| mpr.AuxOutput-Set |
type=Children-Set |
| mpr.MPRProtection-Set |
type=Children-Set |
| mpr.PowerSource-Set |
type=Children-Set |
| nodeTiming |
type=int default=none Displayed(tab/group)=Node Timing (/PDH Layer Configuration) enums= 0: none - None 2: nodeTimed - Node Timed |
| numberOfDaughterCardSlots |
type=int access=read-only default=0 |
| numberOfDaughterCards |
type=int access=read-only default=0 |
| numberOfXiomCardSlots |
type=int access=read-only default=0 |
| numberOfXiomCards |
type=int access=read-only default=0 |
| physicalId |
type=int access=read-only default=0 |
| protectionConfigurationIndex |
type=int access=read-only default=0 |
| protectionGroupIndex |
type=int access=read-only default=0 |
| protectionRestorationCriteria |
type=equipment.RestorationType default=true Displayed(tab/group)=Restoration Criteria (/Protection Scheme Parameters) |
| protectionSwitchCommands |
type=equipment.Commands default=noRequest Displayed(tab/group)=Commands (/Protection Scheme Parameters) |
| protectionSwitchStatus |
type=equipment.SwitchStatus access=read-only default=active Displayed(tab/group)=Status (/Protection Scheme Parameters) |
| protectionUnitIndex |
type=int access=read-only default=0 |
| resetOnRecoverableError |
type=boolean default=false Displayed(tab/group)=Reset On Recoverable Error (/Reset On Recoverable Error) |
| revertive |
Specifies when enabled that the MDA will revert to control of the owner CPIOM
when the Operational State for that CPIOM becomes Up.
type=boolean default=false Displayed(tab/group)=Revertive (/Redundancy) |
| shelfType |
type=equipment.ShelfType access=read-only |
| takeOverDelay |
Specifies the delay time in seconds before the standby CPIOM
takes control of the MDA when the Operational State of the owner CPIOM changes to Down.
type=int default=-1 minimum=-1 maximum=10 Displayed(tab/group)=TakeOver Delay (/Redundancy) |
| vwm.OpsOsmProtectionSwitch-Set |
type=Children-Set |
| vwm.PowerInterface-Set |
type=Children-Set |
| Properties inherited from equipment.Slot |
|---|
| assignedChildType, equippedChildType, replaceableUnitMismatch, slotId, supportedChildTypes |
| Properties inherited from ManagedObject |
|---|
| actionMask, children-Set, deploymentState, isFaultSquelched, name, objectFullName, selfAlarmed |
| Methods |
|---|
deployer
: Deployer - the deployment state
synchronousDeploy
: boolean - (Optional) Specify whether to block until the changes have been fully deployed to the network. A value of "true" means to block. A value of "false" means to return immediately. Default: false (asynchronous)
clearOnDeployFailure
: boolean - (Optional) Specify whether to clear any failed deployers. A value of "true" means to clear. A value of "false" means to leave the failed deployer. Default: false
deployRetries
: int - (Optional) The number of times to attempt re-deployment during synchronous deployment. This parameter is meaningless in the asynchronous case. Default: 0
deployRetryInterval
: long - (Optional) The number of milliseconds to wait between deployment retries. This parameter is meaningless in the asynchronous case. Default: 0
taskDescription
: string - (Optional) A user friendly description of what the operation does. This information will be used by the task manager.
fdn
: string -
cardType
: string -
resultFilter
: ResultFilter - (Optional) Filter for narrowing down the information returned per object
continueOnFailure
: continueOnFailure - (Optional) Continue processing requests in this stream if an exception occurs, unless the request is invalid. Default: false
cardSlotInfo
: summary(equipment.CardSlot) -
equipment.CardSlot.configurePSSCardException
| Methods inherited from equipment.Equipment |
|---|
| getDependencyCount |