| Overview | Package | Class | Deprecated | Help |
| Properties | |
|---|---|
| aggRateLUB |
Specifies whether to limit the unused bandwidth and allow a tighter control in allocation of bandwidth by HQos.
type=boolean default=false Displayed(tab/group)=Limit Unused Bandwidth (/Aggregate Rate Limit) |
| aggregateRateLimit |
Specifies the maximum total rate of all subscribers for this virtual port.
The value -1 means that there is no limit.
type=long default=-1 minimum=-1 maximum=100000000 units=kbps Displayed(tab/group)=Aggregate Rate Limit (/Aggregate Rate Limit) |
| description |
type=string default= minimum=0 maximum=80 Displayed(tab/group)=Description |
| egressRateModify |
Specifies if egress-rate modification is enabled.
Egress-rate-modification takes the egress bandwidth already in use
for multicast traffic into account while performing rate limiting
according to the values of aggregateRateLimit or portSchedulerPolicyPointer,
in order to avoid that the sum of unicast and multicast bandwidths would
exceed the egress aggregate rate limit.
type=equipment.EnableStatus default=2 Displayed(tab/group)=Status (/Egress Rate Modify) |
| egressRateModifyDelta |
The value of egressRateModifyDelta indicates
the actual bandwidth correction applied while egressRateModify
is enabled.
type=int access=read-only units=kbps Displayed(tab/group)=Delta (/Egress Rate Modify) |
| equipment.EgrVPortHostMatching-Set |
type=Children-Set |
| hwAggShaperSchedulerPolicy |
specifies the name of the hardware aggregate shaper scheduling policy assigned to this virtual port.
type=string default= maximum=64 Displayed(tab/group)=HW Aggregated Shaper Scheduler Policy (/Hardware Aggregate Shaper Scheduler) |
| monitorHwAggShaperSchdlr |
Specifies whether or not to enable statistics for monitor-thresholds assigned to this virtual port.
type=equipment.MonitorHWAggShaperSchdlrState default=disabled Displayed(tab/group)=Monitor (/Hardware Aggregate Shaper Scheduler) |
| monitorPortScheduler |
Specifies whether to enable monitoring of port scheduler
type=equipment.MonitorPortSchedulerState default=disabled Displayed(tab/group)=Collect Stats (/Port Scheduler Monitor) |
| portName |
type=string access=read-only default= Displayed(tab/group)=Port Name |
| portSchedulerPolicyName |
type=string access=read-only default= maximum=32 |
| portSchedulerPolicyPointer |
type=Pointer default= Displayed(tab/group)=Port Scheduler Policy (/Port Scheduler Policy) |
| schedulerPolicyName |
type=string access=read-only default= maximum=32 |
| schedulerPolicyPointer |
type=Pointer default= Displayed(tab/group)=Scheduler Policy (/Scheduler Policy) |
| shelfId |
type=int access=read-only default=0 Displayed(tab/group)=Shelf Id |
| siteId |
type=string access=read-only default= Displayed(tab/group)=Site ID |
| snmpPortId |
type=long access=read-only default=0 Displayed(tab/group)=Interface ID |
| virtualPortName |
type=string access=read-create minimum=1 maximum=32 Mandatory on create Displayed(tab/group)=Name |
| Properties inherited from ManagedObject |
|---|
| actionMask, children-Set, deploymentState, isFaultSquelched, name, objectFullName, selfAlarmed |
| Supported Network Elements | |
|---|---|
| 7750 SR |
Supported from 8.0.R4
|
| 7705 SAR Gen 2 | |
| 7450 ESS |
Supported from 8.0.R4
|
| 7950 XRS | Supported from 11.0.R4 |
| 7705 SAR Hm | Supported until 25.3.R1 |
| Product Specifics | |
| 7450 ESS 20.0 | |
| 7450 ESS 21.0 | |
| 7450 ESS 22.0 | |
| 7450 ESS 23.0 | |
| 7450 ESS 24.0 | |
| 7450 ESS 25.0 | |
| 7705 SAR Gen 2 25.0 | |
| 7705 SAR Hm 20.0 | |
| 7705 SAR Hm 21.0 | |
| 7705 SAR Hm 22.0 | |
| 7705 SAR Hm 23.0 | |
| 7705 SAR Hm 24.0 | |
| 7750 SR 20.0 | |
| 7750 SR 21.0 | |
| 7750 SR 22.0 | |
| 7750 SR 23.0 | |
| 7750 SR 24.0 | |
| 7750 SR 25.0 | |
| 7950 XRS 20.0 | |
| 7950 XRS 21.0 | |
| 7950 XRS 22.0 | |
| 7950 XRS 23.0 | |
| 7950 XRS 24.0 | |
| 7950 XRS 25.0 | |