mpr
QOSQueueSize



public class QOSQueueSize

Properties
cardId This identifies the card ID of the Queue Size specified for.

type=string
access=read-create
default=0

highSlopeMax The percentage (0..100) of the buffer utilized after which the drop probability of packets is 100 percent. This implies that all Green packets beyond this point will be dropped.

type=int
minimum=0
maximum=100
units=%
Displayed(tab/group)=High Slope Max (/Queue Size)

highSlopeMaxProbability The drop probability (0..100) of Green packets at the High Slope Max. Default value: 80.

type=int
minimum=0
maximum=100
units=%
Displayed(tab/group)=High Slope Max Probability (/Queue Size)

highSlopeStart The percentage (0..100) of the buffer utilized after which the drop probability of Green packets starts to rise above 0. Default value: 70 for green, 50 for yellow

type=int
minimum=0
maximum=100
units=%
Displayed(tab/group)=High Slope Start (/Queue Size)

lowSlopeMax The percentage (0..100) of the buffer utilized after which the drop probability of Yellow packets is 100 percent. This implies that all Yellow packets beyond this point will be dropped.

type=int
minimum=0
maximum=100
units=%
Displayed(tab/group)=Low Slope Max (/Queue Size)

lowSlopeMaxProbability The drop probability (0..100) of Yellow packets at the Low Slope Max. Default value is 80.

type=int
minimum=0
maximum=100
units=%
Displayed(tab/group)=Low Slope Max Probability (/Queue Size)

lowSlopeStart The percentage (0..100) of the buffer utilized after which the drop probability of Yellow packets starts to rise above 0. Default value is 50

type=int
minimum=0
maximum=100
units=%
Displayed(tab/group)=Low Slope Start (/Queue Size)

portId This identifies the port ID of the Queue Size specified for.

type=string
access=read-create
default=0

queueDelay Specifies the default queue delay of the Queue.

type=string
access=read-only
Displayed(tab/group)=Queue Delay (/Queue Size)

queueNumber Queue Number

type=int
access=read-create
minimum=1
maximum=8
Mandatory on create
Displayed(tab/group)=Queue Number (/Queue Size)

queueSize Specifies the size of first Queue.

type=long
default=2480
minimum=2480
maximum=59925042
Displayed(tab/group)=Queue Size (/Queue Size)

siteId The ip address of the node.

type=string
access=read-only
default=0.0.0.0
maximum=64

snmpPortId Identifies the SNMP Port ID of the radio Interface. This is set internally

type=long
access=read-only

  
Properties inherited from ManagedObject
actionMask, children-Set, deploymentState, isFaultSquelched, name, objectFullName, selfAlarmed
 
Supported Network Elements
Wavence SM Supported from 21.1.1