|
Properties |
|
lowBurstMaxClass |
Specifies which class should use the low priority burst threshold.
type=int
default=8
minimum=1
maximum=8
Displayed(tab/group)=Low Burst Max Class
|
|
portEgrExpShaperHighBurstIncrease |
Specifies the incremental number of bytes above the low burst limit to be used as the high burst
threshold for the aggregate rate of the classes pertaining to the high burst threshold in the
expanded secondary shaper.??
type=int
default=-1
minimum=-1
maximum=65528
units=Bytes
Displayed(tab/group)=High Burst Increase (/Aggregate Burst)
|
|
portEgrExpShaperLowBurstLimit |
Specifies the number of bytes to be used as the low burst threshold for the aggregate rate of
the classes pertaining to the low burst threshold in the expanded secondary shaper.??
type=int
default=-1
minimum=-1
maximum=327680
units=Bytes
Displayed(tab/group)=Low Burst Limit (/Aggregate Burst)
|
|
portEgrShaperClass1BurstThresh |
Specifies the explicit shaping burst size of the class.??
type=int
default=-1
minimum=-1
maximum=327680
units=Bytes
Displayed(tab/group)=Burst Threshold (Classes/Class 1)
|
|
portEgrShaperClass1Rate |
Specifies the explicit maximum frame based bandwidth limit of the Class 1 traffic.
type=int
default=-1
minimum=-1
maximum=10000000
units=Kbps
Displayed(tab/group)=Rate (Classes/Class 1)
|
|
portEgrShaperClass1Thresh |
Specifies the monitoring non-conformance burst threshold for the Class 1.
type=int
default=-1
minimum=-1
maximum=8190
units=Kbytes
Displayed(tab/group)=Monitor Threshold (Classes/Class 1)
|
|
portEgrShaperClass2BurstThresh |
Specifies the explicit shaping burst size of the class.??
type=int
default=-1
minimum=-1
maximum=327680
units=Bytes
Displayed(tab/group)=Burst Threshold (Classes/Class 2)
|
|
portEgrShaperClass2Rate |
Specifies the explicit maximum frame based bandwidth limit of the Class 2 traffic.
type=int
default=-1
minimum=-1
maximum=10000000
units=Kbps
Displayed(tab/group)=Rate (Classes/Class 2)
|
|
portEgrShaperClass2Thresh |
Specifies the monitoring non-conformance burst threshold for the Class 2.
type=int
default=-1
minimum=-1
maximum=8190
units=Kbytes
Displayed(tab/group)=Monitor Threshold (Classes/Class 2)
|
|
portEgrShaperClass3BurstThresh |
Specifies the explicit shaping burst size of the class.??
type=int
default=-1
minimum=-1
maximum=327680
units=Bytes
Displayed(tab/group)=Burst Threshold (Classes/Class 3)
|
|
portEgrShaperClass3Rate |
Specifies the explicit maximum frame based bandwidth limit of the Class 3 traffic.
type=int
default=-1
minimum=-1
maximum=10000000
units=Kbps
Displayed(tab/group)=Rate (Classes/Class 3)
|
|
portEgrShaperClass3Thresh |
Specifies the monitoring non-conformance burst threshold for the Class 3.
type=int
default=-1
minimum=-1
maximum=8190
units=Kbytes
Displayed(tab/group)=Monitor Threshold (Classes/Class 3)
|
|
portEgrShaperClass4BurstThresh |
Specifies the explicit shaping burst size of the class.??
type=int
default=-1
minimum=-1
maximum=327680
units=Bytes
Displayed(tab/group)=Burst Threshold (Classes/Class 4)
|
|
portEgrShaperClass4Rate |
Specifies the explicit maximum frame based bandwidth limit of the Class 4 traffic.
type=int
default=-1
minimum=-1
maximum=10000000
units=Kbps
Displayed(tab/group)=Rate (Classes/Class 4)
|
|
portEgrShaperClass4Thresh |
Specifies the monitoring non-conformance burst threshold for the Class 4.
type=int
default=-1
minimum=-1
maximum=8190
units=Kbps
Displayed(tab/group)=Monitor Threshold (Classes/Class 4)
|
|
portEgrShaperClass5BurstThresh |
Specifies the explicit shaping burst size of the class.??
type=int
default=-1
minimum=-1
maximum=327680
units=Bytes
Displayed(tab/group)=Burst Threshold (Classes/Class 5)
|
|
portEgrShaperClass5Rate |
Specifies the explicit maximum frame based bandwidth limit of the Class traffic.
type=int
default=-1
minimum=-1
maximum=10000000
units=Kbps
Displayed(tab/group)=Rate (Classes/Class 5)
|
|
portEgrShaperClass5Thresh |
Specifies the monitoring non-conformance burst threshold for the Class 5.
type=int
default=-1
minimum=-1
maximum=8190
units=Kbytes
Displayed(tab/group)=Monitor Threshold (Classes/Class 5)
|
|
portEgrShaperClass6BurstThresh |
Specifies the explicit shaping burst size of the class.??
type=int
default=-1
minimum=-1
maximum=327680
units=Bytes
Displayed(tab/group)=Burst Threshold (Classes/Class 6)
|
|
portEgrShaperClass6Rate |
Specifies the explicit maximum frame based bandwidth limit of the Class 6 traffic.
type=int
default=-1
minimum=-1
maximum=10000000
units=Kbps
Displayed(tab/group)=Rate (Classes/Class 6)
|
|
portEgrShaperClass6Thresh |
Specifies the monitoring non-conformance burst threshold for the Class 6.
type=int
default=-1
minimum=-1
maximum=8190
units=Kbps
Displayed(tab/group)=Monitor Threshold (Classes/Class 6)
|
|
portEgrShaperClass7BurstThresh |
Specifies the explicit shaping burst size of the class.??
type=int
default=-1
minimum=-1
maximum=327680
units=Bytes
Displayed(tab/group)=Burst Threshold (Classes/Class 7)
|
|
portEgrShaperClass7Rate |
Specifies the explicit maximum frame based bandwidth limit of the Class 7 traffic.
type=int
default=-1
minimum=-1
maximum=10000000
units=Kbps
Displayed(tab/group)=Rate (Classes/Class 7)
|
|
portEgrShaperClass7Thresh |
Specifies the monitoring non-conformance burst threshold for the Class 7.
type=int
default=-1
minimum=-1
maximum=8190
units=Kbytes
Displayed(tab/group)=Monitor Threshold (Classes/Class 7)
|
|
portEgrShaperClass8BurstThresh |
Specifies the explicit shaping burst size of the class.??
type=int
default=-1
minimum=-1
maximum=327680
units=Bytes
Displayed(tab/group)=Burst Threshold (Classes/Class 8)
|
|
portEgrShaperClass8Rate |
Specifies the explicit maximum frame based bandwidth limit of the Class 8 traffic.
type=int
default=-1
minimum=-1
maximum=10000000
units=Kbps
Displayed(tab/group)=Rate (Classes/Class 8)
|
|
portEgrShaperClass8Thresh |
Specifies the monitoring non-conformance burst threshold for the Class 8.
type=int
default=-1
minimum=-1
maximum=8190
units=Kbytes
Displayed(tab/group)=Monitor Threshold (Classes/Class 8)
|
|
portEgrShaperRate |
Specifies the explicit maximum frame based bandwidth limit.
type=int
default=-1
minimum=-1
maximum=10000000
units=Kbps
Displayed(tab/group)=Rate
|
|
portEgrShaperThresh |
Specifies the monitoring non-conformance burst threshold for the aggregate exp-secondary-shaper.
type=int
default=-1
minimum=-1
maximum=8190
units=Kbytes
Displayed(tab/group)=Monitor Threshold
|