| Overview | Package | Class | Deprecated | Help |
| Properties | |
|---|---|
| administrativeState |
type=netw.AdministrativeState default=tmnxOutOfService Displayed(tab/group)=Administrative State |
| caName |
Associated MACsec Connectivity Association.
type=string default= minimum=0 maximum=32 Displayed(tab/group)=Connectivity Association |
| eapolDestAddress |
Specifies the MAC address of the destination Extensible Authentication Protocol over LAN (EAPoL)
type=MacAddress default=00-00-00-00-00-00 Displayed(tab/group)=Destination EAPoL Mac Address |
| encapType |
allMatch: when this flow type is selected all traffic pattern will be match including un-tag,
single-tag or double-tag and all will be encrypted
untagged: only un-tag traffic will be matched and encrypted
single-tag: only dot1q traffic will be matched and encrypted. Note that either all single tag
traffic can be matched or a specific dot1q tag can be matched.
double-tag: only q-in-q traffic will be matched and encrypted. The service tag or the customer
tag can be specifically matched or can be a wild card match
* in single-tag and double-tag means to match any single/double-tag traffic
Example:
encap-match single-tag * Matches any single-tag traffic on port
encap-match double-tag *.1 Matches only double-tag traffic on port with service tag of
any and customer tag of 1
encap-match double-tag 1.* Matches only double-tag traffic on port with service tag of
1 and customer tag of any
encap-match double-tag *.* Matches any double-tag traffic on port
type=macsec.EncapTypeType default=allMatch Displayed(tab/group)=Encap-Match Type (/Encap Match) |
| id |
Specifies ID of the sub port on the system.
type=int access=read-create minimum=1 maximum=1023 Mandatory on create Displayed(tab/group)=ID |
| innerEncapValue |
Provisioned inner encap value.
type=int default=0 minimum=0 maximum=4095 Displayed(tab/group)=Inner Encapsulation Value (/Encap Match) |
| ipAddressType |
type=rtr.InetAddressType access=read-create default=ipv4 |
| macsec.MkaSession-Set |
type=Children-Set |
| macsecPortPointer |
The pointer pointing to MacsecPort
type=Pointer access=read-only default= Displayed(tab/group)=MACsec Port (/MACsec Port) |
| maxPeers |
Specifies the maximum number of peers supported on this port
type=int default=0 minimum=0 maximum=32 Displayed(tab/group)=Max Peers |
| mkaSessionStatus |
Indicates the operational state of the MKA session on the Macsec Interface.
When the Mka session is deleted, its value is set to "Unknown".
When the Mka session is down, its value is set to "Down". An alarm is raised.
When the Mka session is up, its value is set to "Up". The alarm is cleared.
type=netw.OperationalState access=read-only default=1 Displayed(tab/group)=MKA Session Status |
| outerEncapValue |
Provisioned outer encap value.
type=int default=0 minimum=0 maximum=4095 Displayed(tab/group)=Outer Encapsulation Value (/Encap Match) |
| portName |
The port Name associated with the port.
type=string access=read-only default= Displayed(tab/group)=Port Name |
| portPointer |
Pointer to a Port on the switch.
type=Pointer access=read-create default= Mandatory on create Displayed(tab/group)=Port |
| siteId |
type=InetAddress access=read-create default= Mandatory on create Displayed(tab/group)=Site ID |
| snmpPortId |
type=long access=read-create default=0 |
| Properties inherited from ManagedObject |
|---|
| actionMask, children-Set, deploymentState, isFaultSquelched, name, objectFullName, selfAlarmed |
| Methods |
|---|
deployer
: Deployer - the deployment state
synchronousDeploy
: boolean - (Optional) Specify whether to block until the changes have been fully deployed to the network. A value of "true" means to block. A value of "false" means to return immediately. Default: false (asynchronous)
clearOnDeployFailure
: boolean - (Optional) Specify whether to clear any failed deployers. A value of "true" means to clear. A value of "false" means to leave the failed deployer. Default: false
deployRetries
: int - (Optional) The number of times to attempt re-deployment during synchronous deployment. This parameter is meaningless in the asynchronous case. Default: 0
deployRetryInterval
: long - (Optional) The number of milliseconds to wait between deployment retries. This parameter is meaningless in the asynchronous case. Default: 0
taskDescription
: string - (Optional) A user friendly description of what the operation does. This information will be used by the task manager.
macsecInterfaceFullNames
: List (Pointer) - The list of MACsec Interface full names.
continueOnFailure
: continueOnFailure - (Optional) Continue processing requests in this stream if an exception occurs, unless the request is invalid. Default: false
macsec.MacsecInterface.removeMacsecInterfacesFromCAException
| Supported Network Elements | |
|---|---|
| 7705 SAR | Supported from 24.10.R3 |
| 7750 SR | Supported from 16.0.R1 |
| 7705 SAR Gen 2 | |
| 7450 ESS | Supported from 16.0.R1 |
| 7210 SAS K |
Supported from 11.0.R6
|
| 7210 SAS Dxp |
Supported from 22.9.R1
|
| 7250 IXR |
Supported from 20.10.R1 until 21.2.R1
|
| Product Specifics | |
| 7210 SAS Dxp 22.0 | |
| 7210 SAS Dxp 23.0 | |
| 7210 SAS Dxp 24.0 | |
| 7210 SAS Dxp 25.0 | |
| 7210 SAS K 20.0 | |
| 7210 SAS K 21.0 | |
| 7210 SAS K 22.0 | |
| 7210 SAS K 23.0 | |
| 7210 SAS K 24.0 | |
| 7210 SAS K 25.0 | |
| 7250 IXR 20.0 | |
| 7250 IXR 21.0 | |
| 7250 IXR 22.0 | |
| 7250 IXR 23.0 | |
| 7250 IXR 24.0 | |
| 7250 IXR 25.0 | |
| 7450 ESS 20.0 | |
| 7450 ESS 21.0 | |
| 7450 ESS 22.0 | |
| 7450 ESS 23.0 | |
| 7450 ESS 24.0 | |
| 7450 ESS 25.0 | |
| 7705 SAR Gen 2 25.0 | |
| 7705 SAR 24.0 | |
| 7705 SAR 25.0 | |
| 7750 SR 20.0 | |
| 7750 SR 21.0 | |
| 7750 SR 22.0 | |
| 7750 SR 23.0 | |
| 7750 SR 24.0 | |
| 7750 SR 25.0 | |