| Overview | Package | Class | Deprecated | Help |
| Properties | |
|---|---|
| isApsActive |
"Indicates whether automatic protection switching is active for this PMU-D."
type=generic.TruthValue access=read-only Displayed(tab/group)=Is APS Active (/PMU-D management) |
| pmudActualEVoaBandInLine1Out |
"Actual attenuation value of the eVOA in the BAND IN port in case the TX selector points to the LINE1 OUT port.
When tnVwmMsPmudEVoaControlBandInLine1Out has value manual(1), the value is equal to that of tnVwmMsPmudEVoaBandInLine1Out.
When tnVwmMsPmudEVoaControlBandInLine1Out has value auto(2), the value is determined by the eVoa Control Loop."
type=float access=read-only Displayed(tab/group)=Actual EVoa Band In Line 1 Out (/PMU-D management) |
| pmudActualEVoaBandInLine2Out |
"Actual attenuation value of the eVOA in the BAND IN port in case the TX selector points to the LINE2 OUT port.
When tnVwmMsPmudEVoaControlBandInLine2Out has value manual(1), the value is equal to that of tnVwmMsPmudEVoaBandInLine2Out.
When tnVwmMsPmudEVoaControlBandInLine2Out has value auto(2), the value is determined by the eVoa Control Loop."
type=float access=read-only Displayed(tab/group)=Actual EVoa Band In Line 2 Out (/PMU-D management) |
| pmudActualSelectorPosition |
"Actual position of the band selector."
type=vwm.PmudSelectorPosition access=read-only Displayed(tab/group)=PMU D Actual Selector Position (/PMU-D management) |
| pmudConfigSelectorPosition |
"Actual position of the band selector."
type=vwm.PmudSelectorPosition default=band1 Displayed(tab/group)=PMU D Config Selector Position (/PMU-D management) |
| pmudEVoaBandIn |
Pmud EVoa Band In
type=float access=read-only default=0 units=dBm Displayed(tab/group)=Pmud EVoa Band In (/PMU-D management) |
| pmudEVoaBandInLine1Out |
Pmud EVoa Band In Line 1 Out
type=float default=0 minimum=0 maximum=15 units=dB Displayed(tab/group)=Pmud EVoa Band In Line 1 Out (/PMU-D management) |
| pmudEVoaBandInLine2Out |
Pmud EVoa Band In Line 2 Out
type=float default=0 minimum=0 maximum=15 units=dB Displayed(tab/group)=Pmud EVoa Band In Line 2 Out (/PMU-D management) |
| pmudEVoaBandOut |
Pmud EVoa Band Out
type=float access=read-only default=0 units=dBm Displayed(tab/group)=Pmud EVoa Band Out (/PMU-D management) |
| pmudEVoaBandOutLine1In |
Pmud EVoa Band Out Line 1 In
type=float default=0 minimum=0 maximum=15 units=dB Displayed(tab/group)=Pmud EVoa Band Out Line 1 In (/PMU-D management) |
| pmudEVoaBandOutLine2In |
Pmud EVoa Band Out Line 2 In
type=float default=0 minimum=0 maximum=15 units=dB Displayed(tab/group)=Pmud EVoa Band Out Line 2 In (/PMU-D management) |
| pmudEVoaControlBandInLine1Out |
"The attenuation control mode of the eVOA in the BAND IN port in case the TX selector points to the LINE2 OUT port."
type=vwm.EVoaControlMode Displayed(tab/group)=PMU D EVoa Control Band In Line 1 Out (/PMU-D management) |
| pmudEVoaControlBandInLine2Out |
"The attenuation control mode of the eVOA in the BAND IN port in case the TX selector points to the LINE2 OUT port."
type=vwm.EVoaControlMode Displayed(tab/group)=PMU D EVoa Control Band In Line 2 Out (/PMU-D management) |
| pmudLossRefBand1InOmdOut |
"Reference value for the loss between the OMD output and the BAND2 input.
Valid values are in the range -30 ... 30.
Also value 1000 is valid, and implies 'none'."
type=float minimum=-30 maximum=1000 units=dB Displayed(tab/group)=Loss Ref Band 1 In Omd Out (/PMU-D management) |
| pmudLossRefBand2InOmdOut |
"Reference value for the loss between the OMD output and the BAND2 input.
Valid values are in the range -30 ... 30.
Also value 1000 is valid, and implies 'none'."
type=float minimum=-30 maximum=1000 units=dB Displayed(tab/group)=Loss Ref Band 2 In Omd Out (/PMU-D management) |
| pmudRxPowerBand |
"Power of input signal of the BAND port."
type=float access=read-only Displayed(tab/group)=Rx Power Band (/PMU-D management) |
| pmudRxPowerBand1 |
"Power of input signal of the BAND1 port."
type=float access=read-only Displayed(tab/group)=Rx Power Band 1 (/PMU-D management) |
| pmudRxPowerBand2 |
"Power of input signal of the BAND2 port."
type=float access=read-only Displayed(tab/group)=Rx Power Band 2 (/PMU-D management) |
| pmudRxPowerOmd |
"Power of input signal of the OMD port."
type=float access=read-only Displayed(tab/group)=Rx Power Omd (/PMU-D management) |
| pmudTxPowerBand |
"Power of output signal of the BAND port."
type=float access=read-only Displayed(tab/group)=Tx Power Band (/PMU-D management) |
| pmudTxPowerBand1 |
"Power of output signal of the BAND1 port."
type=float access=read-only Displayed(tab/group)=Tx Power Band 1 (/PMU-D management) |
| pmudTxPowerBand2 |
"Power of output signal of the BAND2 port."
type=float access=read-only Displayed(tab/group)=Tx Power Band 2 (/PMU-D management) |
| pmudTxPowerOmd |
"Power of output signal of the OMD port."
type=float access=read-only Displayed(tab/group)=Tx Power Omd (/PMU-D management) |
| shelfId |
shelf identifier
type=int default=1 minimum=1 maximum=2047 |
| slotId |
slot identifier
type=int default=1 minimum=1 maximum=255 |
| Properties inherited from ManagedObject |
|---|
| actionMask, children-Set, deploymentState, isFaultSquelched, name, objectFullName, selfAlarmed |
| Supported Network Elements | |
|---|---|
| 1830 VWM OSU | Supported from 8.5.0 |