| Overview | Package | Class | Deprecated | Help |
| Properties | |
|---|---|
| mlpppClassCount |
type=int default=0 minimum=0 maximum=4 Displayed(tab/group)=Class Count (MLPPP) |
| mlpppEgressQOSProfId |
Specifies the egress QoS profile to be used for the outgoing
traffic over this MLPPP bundle.
This value may be modified only when numLinks is zero.
A value of 0 indicates a default profile is used as
applicable to a given H/W and the configured value of mlpppClassCount.
type=int default=0 minimum=0 maximum=65535 Displayed(tab/group)=Egress Qos Profile ID (MLPPP) |
| mlpppEgressQOSProfPointer |
Pointer to the instance of MlpppEgressQosProfile.
type=Pointer default= Displayed(tab/group)=MLPPP Egress Qos Profile (MLPPP) |
| mlpppEndPointId |
type=string default=0.0.0.0 Displayed(tab/group)=End Point ID (MLPPP) |
| mlpppEndPointIdClass |
type=bundle.MlpppIdClass default=iee802dot1GlobalMacAddress Displayed(tab/group)=End Point Class ID (MLPPP) |
| mlpppIngressQOSProfId |
Specifies the ingress QoS profile to be used for the incoming
traffic over this MLPPP bundle.
This value may be modified only when the value of numLinks is zero.
A value of 0 indicates a default QoS profile is used
as applicable to a given H/W and the configured value of mlpppClassCount.
type=int default=0 minimum=0 maximum=65535 Displayed(tab/group)=Ingress Qos Profile ID (MLPPP) |
| mlpppIngressQOSProfPointer |
Pointer to the instance of MlpppIngressQosProfile.
type=Pointer default= Displayed(tab/group)=MLPPP Ingress Qos Profile (MLPPP) |
| mlpppMagicNumber |
Specifies whether the bundle will detect
a loopback scenario on member links and take a looped back member link(s)
out of service.
A value of 'enabled (1)' will detect loopbacks.
type=bundle.MagicNumber default=disabled Displayed(tab/group)=Magic Number (MLPPP) |
| shelfId |
type=int access=read-only default=0 |
| snmpPortId |
type=long access=read-only default=0 |
| statelessApsSwitchover |
Specifies whether the bundle will
perform a stateful or a stateless APS switchover.
The value of tmnxBundleMlpppStatelessApsSwo must be set to 'disabled (2)' and
cannot be changed for normal mlppp bundles.
The value of tmnxBundleMlpppStatelessApsSwo may be changed
for APS bundle protection groups.
A stateless switchover implies that PPP is renegotiated on each member
link after the switchover. PPP negotiations may take a few seconds
to complete.
A stateful switchover implies that after an APS switchover the PPP
state of the bundle will be restored based on the bpgrp bundle state
before the switchover.
A value of 'enabled (1)' will configure stateless APS switchovers.
type=bundle.MagicNumber default=disabled Displayed(tab/group)=Stateless Aps Switchover (MLPPP) |
| Properties inherited from ManagedObject |
|---|
| actionMask, children-Set, deploymentState, isFaultSquelched, name, objectFullName, selfAlarmed |
| Supported Network Elements | |
|---|---|
| 7750 SR |
Supported until 23.3.R1
|
| 7705 SAR Gen 2 | |
| 7450 ESS |
Supported from 8.0.R1 until 10.0.R1
|
| 7705 SAR | |
| 7705 SAR H | |
| Product Specifics | |
| 7450 ESS 20.0 | |
| 7450 ESS 21.0 | |
| 7450 ESS 22.0 | |
| 7705 SAR H 20.0 | |
| 7705 SAR H 21.0 | |
| 7705 SAR H 22.0 | |
| 7705 SAR H 23.0 | |
| 7705 SAR H 24.0 | |
| 7705 SAR H 25.0 | |
| 7705 SAR H 9.0 | |
| 7705 SAR 20.0 | |
| 7705 SAR 21.0 | |
| 7705 SAR 22.0 | |
| 7705 SAR 23.0 | |
| 7705 SAR 24.0 | |
| 7705 SAR 25.0 | |
| 7750 SR 20.0 | |
| 7750 SR 21.0 | |
| 7750 SR 22.0 | |