| Overview | Package | Class | Deprecated | Help |
| Properties | |
|---|---|
| lldpMedAdminStatus |
The administratively desired status of the local LLDP agent.
If the associated lldpPortCfgAdminStatus object has a value of 'txOnly(1)', then LLDP agent will transmit
LLDP frames on this port and it will not store any information about the remote systems connected.
If the associated PortCfgAdminStatus object has a value of 'rxOnly(2)', then the LLDP agent will
receive,but it will not transmit LLDP frames on this port.
If the associated lldpPortCfgAdminStatus object has a value of 'txAndRx(3)', then the LLDP agent will
transmit and receive LLDP frames on this port.
If the associated lldpPortCfgAdminStatus object has a value of 'disabled(4)', then LLDP agent will
not transmit or receive LLDP frames on this port. If there is remote systems
information which is received on this port and stored in other tables, before the port's
lldpPortCfgAdminStatus becomes disabled, then the information will naturally age out.
type=lldp.LldpPortAdminStatus default=disabled Displayed(tab/group)=Administrative Status (LLDP MED) |
| lldpMedPolicy1 |
type=Pointer default= Displayed(tab/group)=LLDP MED Network Policy 1 (LLDP MED) |
| lldpMedPolicy2 |
type=Pointer default= Displayed(tab/group)=LLDP MED Network Policy 2 (LLDP MED) |
| lldpMedPolicy3 |
type=Pointer default= Displayed(tab/group)=LLDP MED Network Policy 3 (LLDP MED) |
| lldpMedPolicy4 |
type=Pointer default= Displayed(tab/group)=LLDP MED Network Policy 4 (LLDP MED) |
| lldpMedTLVsTxEnable |
The tmnxLldpPortCfgLldpMedTLVsTxEnable, defined as a bitmap, includes the basic set of LLDP TLVs
whose transmission is allowed on the local LLDP agent by the network management.
Each bit in the bitmap corresponds to a TLV type associated with a specific optional TLV.
It should be noted that the organizationally-specific TLVs are excluded from the
tmnxLldpPortCfgLldpMedTLVsTxEnable, bitmap.
LLDP Organization Specific Information Extension MIBs should have similar configuration
object to control transmission of their organizationally defined TLVs.
The bit 'networkPolicy(1)' indicates that LLDP agent should transmit 'Network Policy TLV'.
The bit 'macPhyConfigStatus(2)' indicates that LLDP agent should transmit 'Mac Physical Config Status TLV'.
There is no bit reserved for the management address TLV type since transmission of management
address TLVs are controlled by another object.
The default value for tmnxLldpPortCfgLldpMedTLVsTxEnable, object is empty set, which
means no enumerated values are set.
The value of this object must be restored from non-volatile storage after a re-initialization of
the management system.
type=lldp.LldpMedTLVBits Displayed(tab/group)=LLDP MED TLVs (LLDP MED) |
| portCfgDestAddressIndex |
The index value used to identify the destination MAC address associated with this entry.
Its value identifies the row in the tmnxLldpPortConfigTable where the MAC address can be found.
type=lldp.DestAddressType access=read-create default=nearestBridge |
| siteId |
IP address of the node to which this LLDP configuration belongs.
type=string access=read-only default=0.0.0.0 maximum=50 |
| snmpPortId |
A unique value for each interface.
type=long default=0 |
| Properties inherited from ManagedObject |
|---|
| actionMask, children-Set, deploymentState, isFaultSquelched, name, objectFullName, selfAlarmed |
| Supported Network Elements | |
|---|---|
| 7210 SAS Dxp | Supported from 22.3.R1 |
| 7210 SAS S/Sx | Supported from 20.9.R1 |
| Product Specifics | |
| 7210 SAS Dxp 22.0 | |
| 7210 SAS Dxp 23.0 | |
| 7210 SAS Dxp 24.0 | |
| 7210 SAS Dxp 25.0 | |
| 7210 SAS S/Sx 20.0 | |
| 7210 SAS S/Sx 21.0 | |
| 7210 SAS S/Sx 22.0 | |
| 7210 SAS S/Sx 23.0 | |
| 7210 SAS S/Sx 24.0 | |
| 7210 SAS S/Sx 25.0 | |