| Overview | Package | Class | Deprecated | Help |
| Properties | |
|---|---|
| alarmState |
Indicates which monitored alarms are raised against the OTU interface
type=ethernetequipment.OTUAlarm access=read-only Displayed(tab/group)=Reported Alarms (OTU Alarms) |
| asyncMapping |
Specifies the Async Mapping for OTU
type=boolean default=false Displayed(tab/group)=Async Mapping |
| cfgAlarms |
Specifies the alarms that are to be monitored by the OTU interface
type=ethernetequipment.OTUAlarm default=4341 Displayed(tab/group)=Configured Alarms (OTU Alarms) |
| fecMode |
Specifies the OTU encapsulation used by the interface
type=ethernetequipment.FecModeType default=enhanced Displayed(tab/group)=FEC Mode |
| fineGrBerSdThrClrCoef |
Specifies the factor used to fine tune the SD BER threshold (SD Clr Threshold) for SD alarm clearing.
type=int default=10 minimum=10 maximum=99 Displayed(tab/group)=SD Clr Threshold Coeff (/Fine Granularity BER Thresholds) |
| fineGrBerSdThrCoef |
Specifies the factor used to fine tune the SD BER threshold (SD Threshold) for SD alarm raising.
type=int default=10 minimum=10 maximum=99 Displayed(tab/group)=SD Threshold Coeff (/Fine Granularity BER Thresholds) |
| fineGrBerSdThresh |
Specifies the BER threshold used to determine when to raise fecSD alarms (OtuIfAlarms).
Bit error rate computed must reach/exceed the threshold value over a predefined period of time (window size) for the alarms to be raised:
BER |Window
Threshold |Length (ms)
--------------------------
3 |8
4 |8
5 |8
6 |13
7 |100
8 |333
9 |1660
type=ethernetequipment.OtuFineGrBerSdThreshold default=7 units=1/10E-n bits received Displayed(tab/group)=SD Threshold (/Fine Granularity BER Thresholds) |
| fineGrBerSdThreshClr |
Specifies the BER threshold used to determine when to clear fecSd alarms (OtuIfAlarms).
type=ethernetequipment.OtuFineGrBerSdThresholdClr default=8 units=1/10E-n bits received Displayed(tab/group)=SD Clr Threshold (/Fine Granularity BER Thresholds) |
| fineGrBerSfThrClrCoef |
Specifies the factor used to fine tune the SF BER threshold (SF Clr Threshold) for SF alarm clearing.
type=int default=10 minimum=10 maximum=99 Displayed(tab/group)=SF Clr Threshold Coeff (/Fine Granularity BER Thresholds) |
| fineGrBerSfThrCoef |
Specifies the factor used to fine tune the SF BER threshold (SF Threshold) for SF alarm raising.
type=int default=10 minimum=10 maximum=99 Displayed(tab/group)=SF Threshold Coeff (/Fine Granularity BER Thresholds) |
| fineGrBerSfThresh |
Specifies the BER threshold used to determine when to raise fecSF alarms (OtuIfAlarms).
Bit error rate computed must reach/exceed the threshold value over a predefined period of time (window size) for the alarms to be raised:
BER |Window
Threshold |Length (ms)
--------------------------
3 |8
4 |8
5 |8
6 |13
7 |100
8 |333
type=ethernetequipment.OtuFineGrBerSfThreshold default=5 units=1/10E-n bits received Displayed(tab/group)=SF Threshold (/Fine Granularity BER Thresholds) |
| fineGrBerSfThreshClr |
Specifies the BER threshold used to determine when to clear fecSf alarms (OtuIfAlarms).
type=ethernetequipment.OtuFineGrBerSdThreshold default=6 units=1/10E-n bits received Displayed(tab/group)=SF Clr Threshold (/Fine Granularity BER Thresholds) |
| fineGrBerSupported |
Indicates whether or not fine granularity BER thresholds are supported on this OTU encapsulated physical interface.
type=boolean access=read-only Displayed(tab/group)=Fine Granularity BER Support |
| lanDataRate |
Specifies the rate at which data is transmitted on the line
type=ethernetequipment.LanDataRate default=dr11049 units=Gb/s Displayed(tab/group)=Configured Data Rate |
| operDataRate |
Indicates the rate at which the OTU data is transmitted on the line
type=int access=read-only units=Mb/s Displayed(tab/group)=Operational Data Rate |
| pmTimReaction |
Indicates whether reaction should occur or not in the event of Path Monitor Trace Identifier mismatch
type=ethernetequipment.OTUTimReaction default=none Displayed(tab/group)=ODU-TIM reaction (/Path Monitoring Trail Trace Identifier) |
| pmTtiExp |
Specifies the Expected Trail Trace Identifier (TTI) for the Path Monitoring (PM) in the OTU overhead
type=string default= minimum=0 maximum=192 Displayed(tab/group)=Expected Rx (/Path Monitoring Trail Trace Identifier) |
| pmTtiExpMode |
Specifies the Expected type of Trail Trace Identifier (TTI) for the Path Monitoring (PM) in the OTU overhead
type=ethernetequipment.OTUTtiMode default=auto Displayed(tab/group)=Expected Rx Mode (/Path Monitoring Trail Trace Identifier) |
| pmTtiRx |
Indicates the Trail Trace Identifier (TTI) for the Path Monitoring (PM) in the received OTU overhead
type=string access=read-only default=0 minimum=0 maximum=192 |
| pmTtiTx |
Specifies the Trail Trace Identifier (TTI) for the Path Monitoring (SM) in the OTU overhead
type=string default= minimum=0 maximum=192 Displayed(tab/group)=Transmitter (/Path Monitoring Trail Trace Identifier) |
| pmTtiTxMode |
Specifies the type of Trail Trace Identifier (TTI) for the Path Monitoring (SM) in the OTU overhead
type=ethernetequipment.OTUTtiMode default=auto Displayed(tab/group)=Transmitter Mode (/Path Monitoring Trail Trace Identifier) |
| psiPayloadTypeExp |
type=string default=00 minimum=0 maximum=2 units=hex Displayed(tab/group)=Expected Payload Type (/PSI Payload Type) |
| psiPayloadTypeRx |
Indicates the Trail Trace Identifier (TTI) for the Payload Structure Identifier (PSI) in the received OTU overhead
type=int access=read-only default=0 minimum=0 maximum=254 Displayed(tab/group)=Receiver (/PSI Payload Type) |
| psiPayloadTypeTx |
type=string default=00 minimum=0 maximum=2 units=hex Displayed(tab/group)=Payload Type (/PSI Payload Type) |
| psiPlmReaction |
Indicates whether reaction should occur or not in the event of Payload Type Identifier Trace
type=ethernetequipment.OTUTimReaction default=none Displayed(tab/group)=OPU-PLM reaction (/PSI Payload Type) |
| psiTimReaction |
Indicates whether reaction should occur or not in the event of Payload Structure Identifier Trace
type=ethernetequipment.OTUTimReaction default=none Displayed(tab/group)=OPU-TIM reaction (/Payload Structure Trail Trace Identifier) |
| psiTtiExp |
Specifies the Expected Trail Trace Identifier (TTI) for the Payload Structure Identifier (PSI) in the OTU overhead
type=string default= minimum=0 maximum=192 Displayed(tab/group)=Expected Rx (/Payload Structure Trail Trace Identifier) |
| psiTtiExpMode |
Specifies the Expected type of Trail Trace Identifier (TTI) for the Payload Structure Identifier (PSI) in the OTU overhead
type=ethernetequipment.OTUTtiMode default=auto Displayed(tab/group)=Expected Rx Mode (/Payload Structure Trail Trace Identifier) |
| psiTtiRx |
Indicates the Trail Trace Identifier (TTI) for the Payload Structure Identifier (PSI) in the received OTU overhead
type=string access=read-only default=0 minimum=0 maximum=192 |
| psiTtiTx |
Specifies the Trail Trace Identifier (TTI) for the Payload Structure Identifier (PSI) in the OTU overhead
type=string default= minimum=0 maximum=192 Displayed(tab/group)=Transmitter (/Payload Structure Trail Trace Identifier) |
| psiTtiTxMode |
Specifies the type of Trail Trace Identifier (TTI) for the Payload Structure Identifier (PSI) in the OTU overhead
type=ethernetequipment.OTUTtiMode default=auto Displayed(tab/group)=Transmitter Mode (/Payload Structure Trail Trace Identifier) |
| sdThreshold |
Specifies the bit error rate(BER) threshold used to determine when to raise
and clear otuBerSd/fecSd alarms
type=int default=7 minimum=5 maximum=9 units=1/10E-n bits received Displayed(tab/group)=SD Threshold |
| sfThreshold |
Specifies the bit error rate(BER) threshold used to determine when to raise
and clear otuBerSf/fecSf alarms
type=int default=5 minimum=3 maximum=6 units=1/10E-n bits received Displayed(tab/group)=SF Threshold |
| sfsdMethod |
Specifies the method on which to detect Signal Failure and Signal Degradation
type=ethernetequipment.SFSDMethod default=fec Displayed(tab/group)=SF-SD Method |
| signalType |
Specifies the type of the output signal of the DWDM port. The signal type could be a single OTU or multiple (muxed) OTUs as in the case of a 260SCX2 transponder in an OES chassis.
type=ethernetequipment.OTUSignalType default=otu4 Displayed(tab/group)=Signal Type |
| smTimReaction |
Indicates whether reaction should occur or not in the event of Section Monitor Trace Identifier mismatch
type=ethernetequipment.OTUTimReaction default=none Displayed(tab/group)=OTU-TIM reaction (/Section Monitoring Trail Trace Identifier) |
| smTtiExp |
Specifies the Expected Trail Trace Identifier (TTI) for the Section Monitoring (SM) in the OTU overhead
type=string default= minimum=0 maximum=192 Displayed(tab/group)=Expected Rx (/Section Monitoring Trail Trace Identifier) |
| smTtiExpMode |
Specifies the Expected type of Trail Trace Identifier (TTI) for the Section Monitoring (SM) in the OTU overhead
type=ethernetequipment.OTUTtiMode default=auto Displayed(tab/group)=Expected Rx Mode (/Section Monitoring Trail Trace Identifier) |
| smTtiRx |
Indicates the Trail Trace Identifier (TTI) for the Section Monitoring (SM) in the received OTU overhead
type=string access=read-only default=0 minimum=0 maximum=192 |
| smTtiTx |
Specifies the Trail Trace Identifier (TTI) for the Section Monitoring (SM) in the OTU overhead
type=string default= minimum=0 maximum=192 Displayed(tab/group)=Transmitter (/Section Monitoring Trail Trace Identifier) |
| smTtiTxMode |
Specifies the type of Trail Trace Identifier (TTI) for the Section Monitoring (SM) in the OTU overhead
type=ethernetequipment.OTUTtiMode default=auto Displayed(tab/group)=Transmitter Mode (/Section Monitoring Trail Trace Identifier) |
| Properties inherited from equipment.PortSpecifics |
|---|
| cardSubType, isPortChannelALeaf, mprFraming, mprLineLength, portClass, portId, snmpPortId, specificCardType, upProtocols |
| Properties inherited from equipment.EquipmentSpecifics |
|---|
| displayedName, lockOlcState, olcState, shelfId, siteId, siteName |
| Properties inherited from ManagedObject |
|---|
| actionMask, children-Set, deploymentState, isFaultSquelched, name, objectFullName, selfAlarmed |
| Supported Network Elements | |
|---|---|
| 7750 SR | Supported from 7.0.R4 |
| 7705 SAR Gen 2 | |
| 7450 ESS | Supported from 7.0.R4 |
| 7950 XRS | |
| 7705 SAR Hm | |
| Product Specifics | |
| 7450 ESS 20.0 | |
| 7450 ESS 21.0 | |
| 7450 ESS 22.0 | |
| 7450 ESS 23.0 | |
| 7450 ESS 24.0 | |
| 7450 ESS 25.0 | |
| 7705 SAR Gen 2 25.0 | |
| 7705 SAR Hm 20.0 | |
| 7705 SAR Hm 21.0 | |
| 7705 SAR Hm 22.0 | |
| 7705 SAR Hm 23.0 | |
| 7705 SAR Hm 24.0 | |
| 7705 SAR Hm 25.0 | |
| 7750 SR 20.0 | |
| 7750 SR 21.0 | |
| 7750 SR 22.0 | |
| 7750 SR 23.0 | |
| 7750 SR 24.0 | |
| 7750 SR 25.0 | |
| 7950 XRS 20.0 | |
| 7950 XRS 21.0 | |
| 7950 XRS 22.0 | |
| 7950 XRS 23.0 | |
| 7950 XRS 24.0 | |
| 7950 XRS 25.0 | |