| Overview | Package | Class | Deprecated | Help |
| Properties | |
|---|---|
| imaLinkAdminStatus |
Specifies the admin status of the imalink
type=mpr.ImaLinkStatus default=down Displayed(tab/group)=Admin Status (IMA Link) |
| imaLinkFeRxFailureStatus |
Specifies the Far end receiving failure status
type=bundle.ImaLinkFailStateType access=read-only Displayed(tab/group)=Far-End Rx Failure Status (IMA Link Monitoring/IMA Link Monitoring) |
| imaLinkFeRxNumFailures |
Specifies far end imalink receiving failures
type=long access=read-only default=0 |
| imaLinkFeRxState |
Specifies the Far end receiving state
type=bundle.ImaLinkStateType access=read-only Displayed(tab/group)=Far-End Rx Link State (IMA Link Monitoring/IMA Link Monitoring) |
| imaLinkFeSevErroredSecs |
Specifies Far end severity error seconds
type=long access=read-only default=0 |
| imaLinkFeTxNumFailures |
Specifies far end imalink transmission failures
type=long access=read-only default=0 |
| imaLinkFeTxState |
Specifies far end transmission state
type=bundle.ImaLinkStateType access=read-only Displayed(tab/group)=Far-End Tx Link State (IMA Link Monitoring/IMA Link Monitoring) |
| imaLinkFeUnavailSecs |
Specifies Far end imalink Unavailability in seconds
type=long access=read-only default=0 |
| imaLinkGrpIndex |
Specifies the group Index value of the imalink from the MIB
type=long access=read-only default=0 Displayed(tab/group)=IMA Group Index (IMA Link) |
| imaLinkGrpName |
specifies the imalink group name
type=string access=read-only default=0 |
| imaLinkImaViolations |
Specifies the Imalink violations
type=long access=read-only default=0 |
| imaLinkInvalidIntervals |
type=long access=read-only default=0 |
| imaLinkNeRxFailureStatus |
Specifies the Near end receiving failure status
type=bundle.ImaLinkFailStateType access=read-only Displayed(tab/group)=Near-End Tx Failure Status (IMA Link Monitoring/IMA Link Monitoring) |
| imaLinkNeRxNumFailures |
Specifies near end imalink receiving failures
type=long access=read-only default=0 |
| imaLinkNeRxState |
Specifies the receiving state of the IMALINK
type=bundle.ImaLinkStateType access=read-only Displayed(tab/group)=Near-End Rx Link State (IMA Link Monitoring/IMA Link Monitoring) |
| imaLinkNeRxUnusableSecs |
Specifies Far end imalink receiving Unusable in seconds
type=long access=read-only default=0 |
| imaLinkNeSevErroredSecs |
Specifies near end severity error seconds
type=long access=read-only default=0 |
| imaLinkNeTxNumFailures |
Specifies near end imalink transmission failures
type=long access=read-only default=0 |
| imaLinkNeTxState |
Specifies the transmission state of the IMALINK
type=bundle.ImaLinkStateType access=read-only Displayed(tab/group)=Near-End Tx Link State (IMA Link Monitoring/IMA Link Monitoring) |
| imaLinkNeTxUnusableSecs |
Specifies near end imalink transmission Unusable in seconds
type=long access=read-only default=0 |
| imaLinkNeUnavailSecs |
Specifies near end imalink Unavailability in seconds
type=long access=read-only default=0 |
| imaLinkOifAnomalies |
Specifies the imalink interface anomalies
type=long access=read-only default=0 |
| imaLinkOperStatus |
Specifies the oper status of the imalink
type=mpr.ImaLinkStatus access=read-only default=down Displayed(tab/group)=Operational State (IMA Link) |
| imaLinkRelDelay |
Specifies imalink delay limit
type=long access=read-only default=0 Displayed(tab/group)=Link Relative Differential Delay (IMA Link Monitoring/IMA Link Monitoring) |
| imaLinkRxLid |
Specifies the imalink Receiving ID
type=long access=read-only default=0 Displayed(tab/group)=Link Rx ID (IMA Link Monitoring/IMA Link Monitoring) |
| imaLinkRxStuffs |
Specifies near end imalink receiving Stuffs
type=long access=read-only default=0 |
| imaLinkRxTestPattern |
Specifies imalink receiving test pattern
type=long access=read-only default=0 |
| imaLinkTestProcStatus |
Specifies imalink test procedure status
type=bundle.TestPatternStateType access=read-only |
| imaLinkTimeElapsed |
type=long access=read-only default=0 |
| imaLinkTxLid |
Specifies the imalink transmission ID
type=long access=read-only default=0 Displayed(tab/group)=Link Tx ID (IMA Link Monitoring/IMA Link Monitoring) |
| imaLinkTxStuffs |
Specifies near end imalink transmission Stuffs
type=long access=read-only default=0 |
| imaLinkValidIntervals |
type=long access=read-only default=0 |
| parentPortId |
Specifies the ID of the Parent port of the IMA link object
type=long access=read-create default=0 |
| portId |
Specifies the port ID of the IMA link Object
type=long access=read-create default=0 Displayed(tab/group)=IMA Link ID (IMA Link) |
| siteId |
Specifies the siteId of the node.
type=string access=read-only Displayed(tab/group)=Router Id (IMA Link) |
| siteName |
Specifies the name of the site
type=string access=read-only default= Displayed(tab/group)=Router Name (IMA Link) |
| slotId |
Specifies the slotId of the slot where IMALINK is present
type=long access=read-only default=0 Displayed(tab/group)=Slot (IMA Link) |
| snmpPortId |
Specifies the SnmpPortId of the port involved in IMALINK
type=long access=read-only default=0 |
| Properties inherited from ManagedObject |
|---|
| actionMask, children-Set, deploymentState, isFaultSquelched, name, objectFullName, selfAlarmed |
| Supported Network Elements | |
|---|---|
| Wavence SM | |