| Overview | Package | Class | Deprecated | Help |
| Properties | |
|---|---|
| canEnableNextCardPortProt |
Specifies if port of the next card slot can be protected.
type=boolean access=read-only default=false |
| canEnableProt |
Specifies if protection tab can be enabled on the node or not.
type=int access=read-only default=0 |
| canEnableSameCardPortProt |
Specifies if next port in the same card can be protected.
type=boolean access=read-only default=false |
| cardType |
CardType of the port used for protection
type=equipment.CardType access=read-create default=unassigned |
| currentSwitchCommand |
Specifies the current mode of switch command none,force,manual,lockout
type=mpr.Commands access=read-only default=noRequest Displayed(tab/group)=Current Command (/Equipment Protection Scheme Parameters) |
| nodeProtectRole |
Specifies the Role of UBT SA protection
type=mpr.ProtRole access=read-only Displayed(tab/group)=Role (/Protection Type) |
| portId |
ID of the port used for protection
type=int access=read-create default=-1 |
| portProtectChoices |
Specifies the which all port can current port protect.
type=mpr.PortProtectChoice access=read-only default=empty |
| portUsage |
Specifies the usage mode of the port.
type=int access=read-only default=0 enums= 0: empty - EMPTY 1: mpthl - MPT 2: sfp - SFP 3: mptmc - MPTMC 4: mpthc - MPTHC 8: mpthlc - MPTHLS 7: mpthls - MPTHLC 9: mpthqam - MPTHQAM |
| protectMatePort |
Specifies mate port of the current Main port
type=string access=read-only default= |
| protectPort |
Specifies whether port protection is possible
type=string access=read-only default= Displayed(tab/group)=Protect Port (/Protection Type) |
| protectSlot |
Specifies whether Slot protection is disabled
type=string access=read-only default= Displayed(tab/group)=Protect Slot (/Protection Type) |
| protectedRole |
Specifies the restoration criteria of the MPTGM 1+1 HSB protection
type=mpr.ProtRole access=read-only Displayed(tab/group)=Role (/Equipment Protection Scheme Parameters) |
| protectionConfigurationIndex |
Gives the index of the protection entry table.
type=int access=read-create default=0 |
| protectionGroupIndex |
Specifies the group Index value of the protection
type=int access=read-only default=0 |
| protectionPositionMain |
gives the position of the main
type=string access=read-only default= |
| protectionPositionSpare |
gives the position of the spare.
type=string default= |
| protectionRestorationCriteria |
Specifies the restoration criteria of the EPS protection
type=mpr.RestorationType access=read-only Displayed(tab/group)=Restoration Criteria (/Equipment Protection Scheme Parameters) |
| protectionRowStatus |
Specifies the rowstatus of the protection object.
type=mpr.ProtStatus access=read-only default=active Displayed(tab/group)=Status (/Protection Type) |
| protectionSwitchCommands |
Specifies the available switch commands for protection.
type=mpr.Commands default=noRequest Displayed(tab/group)=Commands (/Equipment Protection Scheme Parameters) |
| protectionSwitchCriteria |
Specifies the value of the protection switch criteria value.
type=mpr.ProtectionSwitchCriteria access=read-only default=noOne Displayed(tab/group)=Criteria (/Equipment Protection Scheme Parameters) |
| protectionSwitchStatus |
Specifies the switch status of the current switch command
type=mpr.SwitchStatus access=read-only default=active Displayed(tab/group)=Status (/Equipment Protection Scheme Parameters) |
| protectionType |
Specifies the type of the protection used(1+1 HSB/FD)
type=mpr.ProtType access=read-only default=noProtection Displayed(tab/group)=Protection Type (/Protection Type) |
| protectionTypeId |
ID of the protection Type
type=int default=0 |
| protectionUnitIndex |
Specifies the Unit index value of the protection in MIB
type=int access=read-only default=0 |
| radioCurrentSwitchCommand |
specifies the value of the current switch command that is active
type=mpr.Commands access=read-only default=noRequest Displayed(tab/group)=Current Command (/Receiver Protection Scheme Parameters) |
| radioProtectionExtraTraffic |
Virtual RPS configuration.
type=mpr.VirtualRPSType access=read-only default=disabled Displayed(tab/group)=Virtual RPS (/Receiver Protection Scheme Parameters) |
| radioProtectionGroupIndex |
Specifies the group index value of the protection RPS object
type=int access=read-only default=0 |
| radioProtectionRestorationCriteria |
specifies the restoration criteria value of the Radio protection object
type=mpr.RestorationType access=read-only default=true Displayed(tab/group)=Restoration Criteria (/Receiver Protection Scheme Parameters) |
| radioProtectionSpareSwitchCriteria |
specifies the criteria value for the RPS switch over on Spare
type=mpr.RadioProtectionSwitchCriteria access=read-only default=noOne Displayed(tab/group)=Protected End Criteria (/Receiver Protection Scheme Parameters) |
| radioProtectionSpareSwitchStatus |
specifies the status of the current switch command that is active on Spare.
type=mpr.SwitchStatus access=read-only default=active Displayed(tab/group)=Protected End Status (/Receiver Protection Scheme Parameters) |
| radioProtectionSwitchCommands |
specifies the available value for the RPS commands
type=mpr.Commands access=read-only default=noRequest Displayed(tab/group)=Commands (/Receiver Protection Scheme Parameters) |
| radioProtectionSwitchCriteria |
specifies the criteria value for the RPS switch over
type=mpr.RadioProtectionSwitchCriteria access=read-only default=noOne Displayed(tab/group)=Criteria (/Receiver Protection Scheme Parameters) |
| radioProtectionSwitchStatus |
specifies the status of the current switch command that is active.
type=mpr.SwitchStatus access=read-only default=active Displayed(tab/group)=Status (/Receiver Protection Scheme Parameters) |
| radioProtectionUnitChannelNumber |
Gives the channel number of the RPS object(1/0)
type=int access=read-only default=0 |
| slotId |
Gives the slotId of the protection object
type=int access=read-create default=0 |
| txCurrentSwitchCommand |
Gives the value of the current switch command that is active
type=mpr.Commands access=read-only default=noRequest Displayed(tab/group)=Current Command (/Transmitter Protection Scheme Parameters) |
| txProtectionGroupIndex |
Specifies the group index value of the TPS
type=int access=read-only default=0 |
| txProtectionRestorationCriteria |
gives the value for restoration criteria for TPS
type=mpr.RestorationType access=read-only default=true Displayed(tab/group)=Restoration Criteria (/Transmitter Protection Scheme Parameters) |
| txProtectionSwitchCommands |
Gives the value of the available command for switch option
type=mpr.Commands access=read-only default=noRequest Displayed(tab/group)=Commands (/Transmitter Protection Scheme Parameters) |
| txProtectionSwitchCriteria |
Specifies the criteria value for the switch over command
type=mpr.ProtectionSwitchCriteria access=read-only default=noOne Displayed(tab/group)=Criteria (/Transmitter Protection Scheme Parameters) |
| txProtectionSwitchStatus |
Specifies the status of the current switch command that is active
type=mpr.SwitchStatus access=read-only default=active Displayed(tab/group)=Status (/Transmitter Protection Scheme Parameters) |
| txProtectionUnitChannelNumber |
specifies the Unit channel number that is involved in protection (1/0)
type=int access=read-only default=0 |
| Properties inherited from ManagedObject |
|---|
| actionMask, children-Set, deploymentState, isFaultSquelched, name, objectFullName, selfAlarmed |
| Supported Network Elements | |
|---|---|
| Wavence SM | |
| Generic NE 1.0.0 | |
| Product Specifics | |
| Generic NE 1.0.0 | |
| Wavence SM 19A.0.0 | |
| Wavence SM 20A.0.0 | |
| Wavence SM 21A.0.0 | |
| Wavence SM 22.0.0 | |
| Wavence SM 22A.0.0 | |
| Wavence SM 23.0.0 | |
| Wavence SM 23A.0.0 | |
| Wavence SM 24.0.0 | |
| Wavence SM 25.0.0 | |