| Overview | Package | Class | Deprecated | Help |
| Properties | |
|---|---|
| atmEncapCfgBandwidth |
This value indicates the total amount of bandwidth necessary
to carry the Service required. It's specified in kilobits per second (Kbps).
This value is calculated by agent depending on ServiceProfile and the other parameters
provided by managing system (on specific xxCfgTable). The rules to
calculate this value (with all the parameters involved) are equipment
dependent and will be defined in each product external specification
type=long access=read-create default=0 |
| atmEncapCfgInFlowIndex |
Index of the entry on opticsIMInFlowTable with the characteristics of the
ethernet traffic flow carrying the Service emulated. If no flow management
from managing system is required, it MUST be set to zero.
type=long access=read-only default=0 minimum=0 maximum=2147483647 |
| atmEncapCfgIndex |
Index to an entry opticsIMAtmEncapCfgTable.
type=long access=read-create default=0 |
| atmEncapCfgOutFlowIndex |
Index of the entry on opticsIMOutFlowTable with the characteristics of the
ethernet traffic flow carrying the Service emulated. If no flow management
from managing system is required, it MUST be set to zero.
type=long access=read-only default=0 minimum=0 maximum=2147483647 |
| atmEncapCfgRowStatus |
type=mpr.RowStatus default=active |
| atmIfIndex |
ATM Interface ifIndex = 6xnn39999 (x=3..8, nn=1..99)
type=long access=read-create default=0 minimum=0 maximum=2147483647 |
| atmServiceProfile |
The service profile ATM pseudowire service -
PW-TPE an ATM terminal port is cross-connected to a Radio/Ethernet network interface.
PW-SPE radio interface is terminated at an Ethernet interface
No entry is present in this table for the Radio repeater Radio scenario.
type=string access=read-create default=N/A maximum=252 Displayed(tab/group)=ATM Service Profile |
| pwAdminStatus |
type=mpr.AdminStatus access=read-create Mandatory on create |
| pwAtmCfgMaxCellConcatenation |
The maximum number of ATM cells that can be concatenated into one PW packet towards PSN.
In non LDP or other signaling protocol environment, this object MAY be changed at anytime,
but traffic might be interrupted, otherwise, it may be changed when PW is not active.
type=long access=read-create default=0 minimum=0 maximum=2147483647 Displayed(tab/group)=Max Cell Concatenation |
| pwAtmCfgMaxDelay |
The value of pwAtmCfgMaxDelay object specifies the maximum amount of time to wait
while performing ATM cell concatenation into a packet before transmitting the packet.
This places an upper bound on the amount of delay introduced by the concatenation process.
When this amount of time is reached from when the first ATM cell for this packet was received,
the packet is queued for transmission onto the pseudowire.
type=long access=read-create default=0 minimum=0 maximum=2147483647 Displayed(tab/group)=Max Delay (ms) |
| pwAtmInboundNto1MappedVci |
type=int access=read-create default=0 minimum=0 maximum=65535 Displayed(tab/group)=VCI (/Ingress Translation) |
| pwAtmInboundNto1MappedVpi |
type=int access=read-create default=0 minimum=0 maximum=4095 Displayed(tab/group)=VPI (/Ingress Translation) |
| pwAtmInboundNto1Vci |
type=int access=read-create default=0 minimum=0 maximum=65535 |
| pwAtmInboundNto1Vpi |
type=int access=read-create default=0 minimum=0 maximum=4095 |
| pwAtmOutboundNto1MappedVci |
The egress generated VCI value of this ATM PW. The entry is valid for PW type of
atmCellNto1Vcc(9), atmCellNto1Vpc(10), atmCell1to1Vcc(12), or atmCell1to1Vpc(13).
In atmTransparent(3) or VPC case the value will be 0xFFFF.
Value MAY be changed when the PW is defined as not active
type=int access=read-create default=0 minimum=0 maximum=65535 Displayed(tab/group)=VCI (/Egress Translation) |
| pwAtmOutboundNto1MappedVpi |
The egress generated VPI value of this ATM PW. The entry is valid for PW type of
atmCellNto1Vcc(9), atmCellNto1Vpc(10), atmCell1to1Vcc(12), or atmCell1to1Vpc(13).
In other types, the value will be the equivalent of 0xFFFFFFFF.
Value MAY be changed when the PW is defined as not active
type=int access=read-create default=0 minimum=0 maximum=4095 Displayed(tab/group)=VPI (/Egress Translation) |
| pwAtmOutboundNto1Vci |
VCI value of this ATM PW.
type=int access=read-create default=0 minimum=0 maximum=65535 |
| pwAtmOutboundNto1Vpi |
VPI value of this ATM PW.
type=int access=read-create default=0 minimum=0 maximum=4095 |
| pwInboundLabel |
The PW label used in the outbound direction (i.e. toward the PSN).
It might be set manually if pwOwner is 'manual', otherwise setting done automatically.
For MPLS, MPLS over IP or MPLS over GRE PSN, it represents the 20 bits of PW tag,
for L2TP it represents the 32 bits Session ID and for IP PSN it represents
the destination UDP port number. If the label is not yet known (signaling in process),
the object SHOULD return a value of 0xFFFF. For manual configuration,
this object MAY be changed only if the PW is not active.
type=long access=read-create default=0 minimum=1 maximum=2147483647 Displayed(tab/group)=PW Label |
| pwIndex |
This property is opticsIMCESoEthCfgTable.cesCfgPwIndex.
Index of the entry on opticsIMPwTable with the configuration parameters (if needs)
for the manual set-up of PW virtual connection.
If no manual configuration from managing system are required, it MUST be set to zero
type=long access=read-create default=0 minimum=1 maximum=2147483647 |
| pwOutboundLabel |
The PW label used in the outbound direction (i.e. toward the PSN).
It might be set manually if pwOwner is 'manual', otherwise setting done automatically.
For MPLS, MPLS over IP or MPLS over GRE PSN, it represents the 20 bits of PW tag,
for L2TP it represents the 32 bits Session ID and for IP PSN it represents
the destination UDP port number. If the label is not yet known (signaling in process),
the object SHOULD return a value of 0xFFFF. For manual configuration,
this object MAY be changed only if the PW is not active.
type=long access=read-create default=0 minimum=1 maximum=2147483647 |
| pwPeerMacAddress |
type=MacAddress access=read-create default=00-00-00-00-00-00 Displayed(tab/group)=PW MAC Address |
| pwRowStatus |
type=mpr.RowStatus |
| pwType |
type=mpr.MprPwType access=read-create Mandatory on create |
| siteId |
type=IpAddress access=read-only default=0.0.0.0 |
| slotId |
Slot Id of the port
type=int access=read-only default=0 |
| vlanId |
Vlan Id. This property is opticsIMEth2ETSFlowClassifierEntry.opticsIMEth2ETSFlowClassifierVlan
type=int access=read-create default=0 minimum=0 maximum=4096 Displayed(tab/group)=Vlan ID |
| Properties inherited from ManagedObject |
|---|
| actionMask, children-Set, deploymentState, isFaultSquelched, name, objectFullName, selfAlarmed |
| Supported Network Elements | |
|---|---|
| Wavence SM |
Supported for all versions
|