| Overview | Package | Class | Deprecated | Help |
| Properties | |
|---|---|
| accessuplink.EgressQueueStatsConfig-Set |
type=Children-Set |
| accountingPolicyCapable |
type=boolean access=read-only default=false |
| accountingPolicyId |
type=long access=read-only default=0 |
| accountingPolicyName |
type=string access=read-only default= maximum=80 |
| accountingPolicyObjectPointer |
type=Pointer default= Displayed(tab/group)=Accounting Policy (Policies.General/Accounting) |
| actualSpeed |
type=long access=read-only default=0 units=kbps Displayed(tab/group)=Actual Speed |
| collectStats |
type=boolean default=true Displayed(tab/group)=Collect Accounting Statistics (Policies.General/Accounting) |
| currentNumberOfChannels |
type=int access=read-only default=0 |
| description |
type=string default= minimum=0 maximum=256 Displayed(tab/group)=Description |
| encapType |
type=equipment.PortEncapType default=nullEncap Displayed(tab/group)=Encapsulation Type |
| equipment.PortEgrHsmdaSchedulerOverride-Set |
type=Children-Set |
| equipment.PortSchedulerOverride-Set |
type=Children-Set |
| ethAccessAccountingPolicyObjectPointer |
The value of ethAccessAccountingPolicyObjectPointer specifies the
TIMETRA-LOG-MIB::tmnxLogApPolicyId that identifies the policy entry in
TIMETRA-LOG-MIB::tmnxLogApTable which is associated with this ethernet
access port queue for the purpose of collecting physical layer
ethernet access port queue statistics.
type=Pointer default= Displayed(tab/group)=Access Accounting Policy (Policies.General/Ethernet Access Accounting) |
| ethAccessCollectStats |
The value of ethAccessCollectStats specifies whether or not
the collection of physical layer ethernet accounting and statistical
data for the ethernet access port queue is enabled
type=boolean default=false Displayed(tab/group)=Collect Access Accounting Statistics (Policies.General/Ethernet Access Accounting) |
| etherAccountingPolicyObjectPointer |
type=Pointer default= Displayed(tab/group)=Accounting Policy (Policies.General/Ethernet Accounting) |
| etherCollectStats |
type=boolean default=false Displayed(tab/group)=Collect Accounting Statistics (Policies.General/Ethernet Accounting) |
| hasConnections |
Indicates the existence of services on an AccessInterface or a Network Interface. This property is also set to true in case of management ports.
type=boolean access=read-only default=false |
| hasUserAssignedMac |
type=boolean access=read-only default=false |
| holdTimeDown |
type=int default=0 minimum=0 maximum=36000 units=seconds Displayed(tab/group)=Hold Time Down (/Hold Time) |
| holdTimeUnits |
type=equipment.HoldTimeUnitsType default=0 Displayed(tab/group)=Hold Time Units (/Hold Time) |
| holdTimeUp |
type=int default=0 minimum=0 maximum=36000 units=seconds Displayed(tab/group)=Hold Time Up (/Hold Time) |
| hwMacAddress |
type=MacAddress access=read-only default=00-00-00-00-00-00 Displayed(tab/group)=Hardware MAC |
| intervalNumber |
Stats interval number to retrieve when doing a manual resync.
type=int access=read-only default=1 |
| iomType |
type=equipment.CardType access=read-only default=unassigned |
| isConnectionTerminated |
type=boolean access=read-only default=false |
| isLinkUp |
Indicates whether or not the port has a physical link.
type=boolean access=read-only default=false Displayed(tab/group)=Link Up (States) |
| isPortChannelALeaf |
type=generic.TruthValue access=read-only default=false |
| isTerminatable |
type=boolean access=read-only default=false |
| isl2UplinkMode |
type=boolean default=false Displayed(tab/group)=L2Uplink |
| l2ProfilePointer |
Pointer to the L2 Profile Policy object.
type=Pointer default= Displayed(tab/group)=L2 Profile (Policies.General/L2 Profile) |
| linkTrap |
type=int default=disable Displayed(tab/group)=Link Trap enums= 1: enable - Enabled 2: disable - Disabled |
| loadBalanceAlgorithm |
Specifies the load balancing algorithm to be used on this port.
type=equipment.PortLoadBalanceAlgorithm default=notApplicable Displayed(tab/group)=Load Balance Algorithm |
| macAddress |
type=MacAddress default=00-00-00-00-00-00 Displayed(tab/group)=Configured MAC |
| memberOfIGH |
ECMP fate sharing group membership
type=Pointer access=read-only default= Displayed(tab/group)=Holding IGH (/IGH Membership) |
| mirrorStatus |
type=mirror.MirrorStatusBit access=read-only default=disabled |
| mode |
type=equipment.PortMode default=undefined Displayed(tab/group)=Mode |
| mpr.FlowEntry-Set |
type=Children-Set |
| mpr.PwAtmLayer-Set |
type=Children-Set |
| mpr.VlanPort-Set |
type=Children-Set |
| mptCombiner |
Enable/Disable Combiner(SD)function on MPT.
type=long access=read-only default=disable Displayed(tab/group)=Combiner (/Port Usage) enums= 2: enable - Enabled 1: disable - Disabled |
| mptCombinerImplemented |
TRUE/FALSE based on MPT provision
type=long default=false enums= 1: true - True 2: false - False |
| mptSubrackPointer |
specifies where the MPT is connected to on the subrack
type=Pointer access=read-only Displayed(tab/group)=Subrack Connection (/Port Usage) |
| mtuValue |
type=int default=0 units=bytes Displayed(tab/group)=MTU |
| neSpecificMtu |
The MTU of the port as reported by the network element.
Various vendors may configure the MTU differently. For example on Cisco IOS/IOS-XE the
port MTU is configured as protocol MTU, it means that MTU 1500 can fit a protocol payload of 1500 bytes.
Whereas on Cisco IOS-XR to fit 1500 bytes of payload data the MTU must be configured as 1514.
This attribute is read-only and its purpose is to indicate the NE specific MTU value that may be used
for troubleshooting.
The normalized MTU value for the port is specified by the mtuValue property.
type=int access=read-only default=0 units=bytes Displayed(tab/group)=NE Actual MTU |
| networkQueueObjectPointer |
type=Pointer default= |
| networkQueuePolicyCapable |
type=boolean access=read-only default=false |
| networkQueuePolicyName |
type=string access=read-only default=default minimum=1 maximum=32 Displayed(tab/group)=Network Queue Policy Name (Policies.General/Network Queue) |
| numberOfPossibleChannels |
type=long access=read-only default=0 |
| operationalMTU |
type=int access=read-only default=0 units=bytes Displayed(tab/group)=Operational MTU |
| parentSnmpPortId |
type=long access=read-only default=0 |
| portBreakout |
type=int default=disable Displayed(tab/group)=Port breakout enums= 1: enable - Enabled 2: disable - Disabled |
| portCategory |
type=equipment.PortCategory access=read-only default=unknown |
| portClass |
type=equipment.PortClass access=read-only default=none Displayed(tab/group)=Class |
| portEgrHsmdaSchedulerPolicy |
Specifies the hsmda scheduler policy used by this port
type=Pointer default= Displayed(tab/group)=HSMDA Egress Scheduler Policy (Policies.General/HSMDA Scheduler) |
| portEgrNamedPoolPlcy |
type=Pointer default= |
| portEgrPoolPercentageRate |
type=int default=100 minimum=0 maximum=1000 units=% |
| portHoldTimeDownRemaining |
type=int access=read-only default=0 units=centiseconds Displayed(tab/group)=Hold Time Down Remaining (/Hold Time) |
| portHoldTimeUpRemaining |
type=int access=read-only default=0 units=centiseconds Displayed(tab/group)=Hold Time Up Remaining (/Hold Time) |
| portId |
type=long access=read-create default=0 |
| portIngrNamedPoolPlcy |
type=Pointer default= |
| portIngrPoolPercentageRate |
type=int default=100 minimum=0 maximum=1000 units=% |
| portName |
type=string access=read-only default= maximum=252 Displayed(tab/group)=CLI Name |
| portRsFecOperMode |
The value of portRsFecOperMode indicates the mode of Reed-Solomon Forward Error Correction (RS-FEC) in use on this port.
When the value of portRsFecOperMode is set to 'none', the port is transmiting and receiving using standard 64B/66B encoding.
type=equipment.RsFecMode access=read-only default=0 |
| portSchedulerPolicyObjectPointer |
Specifies the port scheduler policy used by this port
type=Pointer default= Displayed(tab/group)=Port Scheduler Policy (Policies.General/Port Scheduler) |
| portStateFPNumber |
The value of portStateFPNumber indicates the forwarding plane number for this port.
type=int access=read-only default=0 |
| portStateLicensed |
The value of portStateLicensed indicates whether this port is licensed for the current licensed level of the assigned MDA.
A value of 'true' indicates this port is licensed and can be used in service configuration.
A value of 'false' indicates that the port is unlicensed and may not be used.
type=boolean access=read-only default=false |
| portStateMacChipNumber |
The value of portStateMacChipNumber indicates the MAC chip number for this port.
type=int access=read-only default=0 |
| portUsage |
type=int access=read-only default=0 Displayed(tab/group)=Port Usage (/Port Usage) enums= 0: empty - EMPTY 1: mpthl - MPT-HL 2: sfp - SFP 3: mptmc - MPT-MC 4: mpthc - MPT-HC 5: sfpo - SFP-O 6: sfpe - SFP-E 7: mpthls - MPT-HLS 8: mpthlc - MPT-HLC 9: mpthqam - MPT-HQAM 10: syncio - SYNC-IO 11: todio - TOD-IO 12: csfp - C-SFP 13: ubtt - UBT-T 14: ubt80 - UBT-m_80GHz 15: ubts - UBT-S 16: ubtc - UBT-C 17: sfpcpl - SFP-CPL 18: ubti - UBT-I 19: ubttxp - UBT-T XP |
| portUsageType |
type=int access=read-only default=0 enums= 0: none - None 1: electrical - Electrical 2: optical - Optical 3: hybridelectrical - Hybrid-Electrical 4: hybridoptical - Hybrid-Optical |
| previousState |
type=equipment.PortState access=read-only default=1 Displayed(tab/group)=Previous State (States) |
| radioequipment.RadioPortSpecifics-Set |
type=Children-Set |
| snmpPortId |
type=long access=read-only default=0 Displayed(tab/group)=Interface ID |
| specificCardType |
type=equipment.CardType access=read-only default=mda_unknown |
| specificType |
type=equipment.PortType access=read-only default=unknownPort |
| speed |
type=equipment.Speed default=0 units=Mbps Displayed(tab/group)=Speed |
| state |
Indicates the state of the port
none state indicates the port is either in its initial creation state or in deletion.
ghost state indicates a port that is not physically present.
linkDown state indicates a port that is physically present but does not have a link.
linkUp state indicates a port that is physically present and has physical link present.
up state is ready to pass some kinds of traffic.
type=equipment.PortState access=read-only default=1 Displayed(tab/group)=State (States) |
| ubtListBits |
type=equipment.MPR_TypeList access=read-only Displayed(tab/group)=UBT-bits (/UBT Attributes) |
| ubtSpeed |
type=equipment.UbtSpeedType access=read-only default=oneGbps Displayed(tab/group)=UBT-Speed (/UBT Attributes) |
| uniProfilePointer |
Pointer to the UNI Profile Policy object.
type=Pointer default= Displayed(tab/group)=UNI Profile (Policies.General/UNI Profile) |
| unpPortType |
Configures UNP functionality for the specified port
type=unpprofile.UNPPortType default=none Displayed(tab/group)=UNP Port Type (Policies.General/UNP Port) |
| upProtocols |
type=equipment.PortProtocols access=read-only default=0 |
| userLabel |
type=string maximum=20 Displayed(tab/group)=User label |
| vlanAutoBind |
type=boolean default=true Displayed(tab/group)=Automatic VLAN Binding |
| vwm.OtdrSpecifics-Set |
type=Children-Set |
| Overridden Properties | |
|---|---|
| displayedName | |
| Properties inherited from ManagedObject |
|---|
| actionMask, children-Set, deploymentState, isFaultSquelched, name, objectFullName, selfAlarmed |
| Methods |
|---|
distinguishedName
: Pointer - Distinguished Name of Port/LAG to be migrated.
resultFilter
: ResultFilter - (Optional) Filter for narrowing down the information returned per object
continueOnFailure
: continueOnFailure - (Optional) Continue processing requests in this stream if an exception occurs, unless the request is invalid. Default: false
migrationResult
: equipment.HybridMigrationResultStruct -
equipment.Port.getMigrationResultException
deployer
: Deployer - the deployment state
synchronousDeploy
: boolean - (Optional) Specify whether to block until the changes have been fully deployed to the network. A value of "true" means to block. A value of "false" means to return immediately. Default: false (asynchronous)
clearOnDeployFailure
: boolean - (Optional) Specify whether to clear any failed deployers. A value of "true" means to clear. A value of "false" means to leave the failed deployer. Default: false
deployRetries
: int - (Optional) The number of times to attempt re-deployment during synchronous deployment. This parameter is meaningless in the asynchronous case. Default: 0
deployRetryInterval
: long - (Optional) The number of milliseconds to wait between deployment retries. This parameter is meaningless in the asynchronous case. Default: 0
taskDescription
: string - (Optional) A user friendly description of what the operation does. This information will be used by the task manager.
distinguishedName
: Pointer - Distinguished Name of Port/LAG to be migrated.
portMode
: equipment.PortMode - Desired Mode value
configInfo
: generic.CommonManagedContainmentEntityConfigurationInformation - (Optional) Desired values to configure Port/LAG during migration.
continueOnFailure
: continueOnFailure - (Optional) Continue processing requests in this stream if an exception occurs, unless the request is invalid. Default: false
equipment.Port.migrateModeException
| Methods inherited from equipment.Equipment |
|---|
| getDependencyCount |