| Overview | Package | Class | Deprecated | Help |
| Properties | |
|---|---|
| backboneDestMac |
Specifies the Backbone Destination MAC-Address for PBB packets.
Should be a valid unicast MAC address.
type=MacAddress default=00-00-00-00-00-00 Displayed(tab/group)=Destination MAC Address (Backbone/PBB) |
| backboneDestMacNamePointer |
Specifies the Backbone Destination MAC-Address-Name for Provider Backbone Bridging packets.
type=Pointer default= Displayed(tab/group)=Destination MAC Address Alias (Backbone/PBB) |
| backboneFlooding |
Specifies the state for traffic flowing into the Backbone-VPLS
through PBB tunnel.
If the backbone-destination MAC is found in the FDB of
Backbone-VPLS then traffic will be sent to specific SAP/SDP
and this object will be set to 'false' otherwise traffic
will be flooded to all SAP/SDP bindings in the
Backbone-VPLS and the object will be set to 'true'.
type=boolean access=read-only default=false Displayed(tab/group)=Backbone Service Flooding (Backbone/PBB) |
| backboneSvcId |
Specifies the Backbone-VPLS service for the PBB tunnel
associated with this Epipe service site.
type=long access=read-only default=0 |
| backboneSvcOperState |
Specifies the operating state of the PBB tunnel associated
with this Epipe Service Site.
type=netw.OperationalState access=read-only default=unknown Displayed(tab/group)=Backbone Service Operational State (Backbone/PBB) |
| backboneSvcOperStateChgTime |
Indicates the time of the most recent operating status change to
this PBB tunnel.
type=Date access=read-only default=0 Displayed(tab/group)=Backbone Service Operational State Change Time (Backbone/PBB) |
| backboneSvcSitePointer |
The b-vpls service site pointer pointing to the B-VPLS
service site instance.
type=Pointer default= Displayed(tab/group)=Backbone VPLS Site (Backbone) |
| bgpVpwsEnabled |
Specifies whether BGP VPWS is enabled on this site.
type=boolean default=false Displayed(tab/group)=Enable BGP VPWS (BGP.VPWS) |
| dstSapForTpTest |
Specifies the traffic destination SAP that is created for testing service throughput.
type=Pointer access=read-only default= |
| epipe.BgpCfg-Set |
type=Children-Set |
| epipe.BgpEvpn-Set |
type=Children-Set |
| epipe.BgpMhSite-Set |
type=Children-Set |
| epipe.BgpVpwsRemoteVE-Set |
type=Children-Set |
| epipe.BgpVpwsSite-Set |
type=Children-Set |
| epipe.EpipeVxlanVni-Set |
type=Children-Set |
| epipe.PwPortFpe-Set |
type=Children-Set |
| epipe.SegmentRoutingV6-Set |
type=Children-Set |
| ethOrIpL4TeidHashing |
Specifies whether Ethernet or IP L4 TEID is used in hashing for load balancing is enabled on this
service.
type=boolean default=false Displayed(tab/group)=Ethernet Or IP L4 TEID Hashing Enabled (/Load Balancing) |
| ethernetoam.CfmVlanDefaultMd-Set |
type=Children-Set |
| firewallBypassPolicy |
Specifies the firewall security bypass policy.
type=Pointer default= Displayed(tab/group)=Security Bypass Policy (Security/Security Bypass) |
| flexibleCrossConnect |
Indicates if the service is in flexible cross connect mode for EVPN VPWS.
This object can only be specified when the service is created
type=boolean access=read-create default=false Displayed(tab/group)=Flexible Cross Connect |
| forceQTagForwarding |
Specifies whether to enable addition of an IEEE 802.1q tag
after the Customer MAC address when the PBB header is
built, as it egresses related B-VPLS service.
type=boolean default=false Displayed(tab/group)=Force Q Tag Forwarding (Backbone) |
| ignoreMtuMismatch |
The value specifies whether the system should ignore the MTU mismatch between Layer-2 MTU and local service MTU.
type=boolean default=false Displayed(tab/group)=Ignore L2 VPN MTU Mismatch |
| isid |
Specifies a 24 bit (0..16777215) service instance identifier
for this service. As part of the Provider Backbone Bridging
frames, it is used at the destination PE as a demultiplexer field.
It must be set along with property backboneSvcSitePointer.
When the backboneSvcSitePoint is not set, the isid should be -1.
When the backboneSvcSitePoint is set, value of "-1" means use the value
of service ID.
type=long default=-1 minimum=-1 maximum=16777215 Displayed(tab/group)=ISID (Backbone/PBB) |
| l4LoadBalancing |
The value of L4LoadBalancing specifies service-level L4
hashing for Ethernet services.
type=boolean default=false Displayed(tab/group)=L4 Load Balancing (/Load Balancing) |
| localSwitchingServiceState |
The value of localSwitchingServiceState specifies whether the operational
status of the PBB-EPIPE service depends on the status of the
pbb-tunnel only, in a PBB-Epipe with two SAPs and a pbb-tunnel.
'sap': The operational-state of the PBB-EPIPE service is up as long as
two out of three endpoints are up (being the three endpoints the two
SAPs and the PBB-Epipe). At least one of the saps need to be up for
the PBB-Epipe to be operationally up.
'pbb-tunnel': When configured, the state of the PBB-EPIPE service is
up if the PBB tunnel is operationally up, and irrespective of the
operational state of the SAPs.
type=int default=0 Displayed(tab/group)=Local Switching Service State (Backbone) enums= 0: sap - SAP 1: pbbTunnel - PBB Tunnel |
| loopbackTimeForTpTest |
Specifies the loopback time of the restored port for throughput test.
DEPRECATED: 10.0 R7 type=long access=read-only |
| loopbackTypeForTpTest |
Specifies the loopback of the restored port for throughput test.
DEPRECATED: 10.0 R7 - no longer used to retrieve the loopback setting for throughput test type=int access=read-only |
| memberOperGroupName |
Specifies the operational group name associated with egress IP address
when doing VXLAN encapsulation of frames for this service.
type=string default= |
| mfThroughputTest |
Indicates whether the service site is modified for the service throughput test.
type=boolean access=read-only default=false Displayed(tab/group)=Modified for Throughput Test |
| netIngClassificationOverridePointer |
Specifies the Network Ingress Classification Policy name for this service.
type=Pointer default= Displayed(tab/group)=7250 SROS Ingress Classification Policy (/Network Ingress QoS) |
| operationalBackboneDestMac |
Indicates the operational Backbone Destination MAC-Address for Provider Backbone Bridging packets.
type=MacAddress access=read-only default=00-00-00-00-00-00 Displayed(tab/group)=Operational Destination MAC Address (Backbone/PBB) |
| perServiceHashing |
The value of PerSvcHashing specifies service-level hashing for Ethernet services.
type=boolean default=false Displayed(tab/group)=Per Service Hashing for LAG Enabled (/Load Balancing) |
| portToRestoreSapForTpTest |
Specifies the port, where a SAP was configured before but reported to have the problem.
It will be used to restore the SAP after the test.
type=Pointer access=read-only default= |
| pwPortFpeEnabled |
Specifies whether PW Port FPE is enabled on this site.
type=boolean default=false Displayed(tab/group)=Enable PW Port FPE (PW Port FPE) |
| service.OperGrpBindingMember-Set |
type=Children-Set |
| srcSapForTpTest |
Specifies the traffic entry SAP that is created for testing service throughput.
type=Pointer access=read-only default= |
| svcCustomerVcId |
This attribute is a property of 7210 SAS nodes.
type=int access=read-create default=0 minimum=0 maximum=4094 Displayed(tab/group)=Customer VID |
| svcEpipeType |
This attribute is a property of 7210 SAS M/X nodes.
type=boolean access=read-create default=false Displayed(tab/group)=PBB Epipe |
| svcSapType |
Specifies the type of SAPs which can be configured on the service site.
The SAP type determines the encapsulation type (tagging behavior) for packets processed on the SAP.
type=epipe.SapType access=read-create default=nullStar Displayed(tab/group)=SAP Type |
| svt.SpokeSdpBinding-Set |
type=Children-Set |
| svt.SpokeSdpFec-Set |
type=Children-Set |
| teidLoadBalancing |
The value of TeidLoadBalancing specifies service-level teid
hashing for Ethernet services.
type=generic.EnabledDisabled default=disabled Displayed(tab/group)=TEID Load Balancing (/Load Balancing) |
| testService |
Specifies whether this service is a test service.
type=boolean access=read-create default=false Displayed(tab/group)=Test Service |
| tunnelFaultNotification |
"The value of tunnelFaultNotification specifies whether
the service will 'accept' CFM fault notification from a
Tunnel MEP and process the notification (i.e. do fault handling
and/or fault propagation), or 'ignore' the notification.
Both TIMETRA-SAP-MIB::sapEthCfmTunnelFaultNotification and
this object MUST be set to 'accept' for an individual
SAP to process the notification."
type=service.TunnelFaultNotificationType default=ignore Displayed(tab/group)=Tunnel Fault Notification (OAM.ETH-CFM/Facility Meps) |
| vll.Endpoint-Set |
type=Children-Set |
| vll.L2AccessInterface-Set |
type=Children-Set |
| vxlanSrcTepIpAddr |
Specifies the tunnel source IP address when doing VXLAN encapsulation of frames for this
service (source VTEP).
type=InetAddress default=0.0.0.0 Displayed(tab/group)=Source IP Address (/VXLAN Tunnel End Point) |
| vxlanSrcTepIpAddrType |
Specifies the type of IP address associated with vxlanSrcTepIpAddr.
type=rtr.InetAddressType default=ipv4 |
| Overridden Properties | |
|---|---|
| ethernetSwitchCardPointer |
On 1830 PSS nodes, new cards like 11QPE24 supports E-LAN (VPLS) and later E-Line (VLL);
other cards will follow. All of these cards support the SR-OS object model and behave similar
to 7210 nodes.
This object represents a service object on a given a site and card. This attribute is
a pointer to the card model object.
applicable=false (Where parent is one of (epipe.Epipe)) |
| Properties inherited from epipe.AbstractSite |
|---|
| bgpEnabled, bgpEvpnEnabled, mtu |
| Properties inherited from vll.Site |
|---|
| bandwidthMethod, clear.ClearRequest-Set, cos0BW, cos1BW, cos2BW, cos3BW, cos4BW, cos5BW, cos6BW, cos7BW, overrideSvcBwConfig, testRole, testSource, testTarget, topologyAutoCompletion, vcId, vllSiteType |
| Properties inherited from ManagedObject |
|---|
| actionMask, children-Set, deploymentState, isFaultSquelched, name, objectFullName, selfAlarmed |
| Methods inherited from service.Site |
|---|
| findSitesFor, shutDown, turnUp |