| Overview | Package | Class | Deprecated | Help |
| Properties | |
|---|---|
| autoAdminState |
The value of administrativeState specifies the state based on
which the Auto LDP Tree Discovery process starts or stops.
When the administrativeState becomes 'inService',
the Auto LDP Tree Discovery process starts, and periodic
path-probing on the previously discovered paths, if any, continues.
When the administrativeState becomes 'outOfService',
the Auto LDP Tree Discovery process and periodic path-probing
on the discovered paths stop.
At the starting of the Auto discovery process, it selects the
address FECs imported from LDP peers (TIMETRA-LDP-MIB::
vRtrLdpAddrFecTable) provided the FECs pass the configured policies
(tmnxOamLTtraceAutoPolicy1..tmnxOamLTtraceAutoPolicy5). For all the
FECs (tmnxOamLTtraceAutoTotalFecs), it automatically
creates entries from the tmnxOamLTtraceFecInfoTable. As a part of
the auto discovery process, it creates entries from the
tmnxOamLTtracePathInfoTable for each discovered path."
type=ldp.EcmpAdministrativeState default=outOfService Displayed(tab/group)=Administrative State (Ecmp/Path Discovery) |
| autoDisFecs |
Indicates the number of selected Address FECs
that have been discovered successfully during the
current discovery process.
type=int access=read-only default=0 Displayed(tab/group)=Discovered FECs (Ecmp/Autodiscovery Results) |
| autoDiscIntvl |
Specifies number of minutes to wait before repeating LDP Tree Auto
Discovery process.
type=int default=60 minimum=60 maximum=1440 units=Minutes Displayed(tab/group)=Discovery Interval (Ecmp/Path Discovery) |
| autoDiscoveryState |
Indicates the current state of the discovery process
type=ldp.EcmpDiscoveryState access=read-only default=initial Displayed(tab/group)=Discovery State (Ecmp/Autodiscovery Results) |
| autoLastDisDur |
Indicates the time (in seconds) it took to finish the last
discovery process.If no test has been finished,
the value is 0. This value is updated only when a discovery ends.
type=int access=read-only default=0 units=Seconds Displayed(tab/group)=Last Discovery Duration (Ecmp/Autodiscovery Results) |
| autoLastDisEnd |
Indicates the sysUptime when the last Auto discovery
process ended. Before the first discovery process ends,
it would be 0. At the end of a discovery this value is set.
This value is not reset during starting/restarting.
type=Date access=read-only default=0 Displayed(tab/group)=Last Discovery End (Ecmp/Autodiscovery Results) |
| autoLastDisStart |
Indicates the sysUptime when the last Auto discovery
process started. If no discovery process has started,
the value will be 0
type=Date access=read-only default=0 Displayed(tab/group)=Last Discovery Start (Ecmp/Autodiscovery Results) |
| autoMaxPath |
Specifies the maximum number of paths that can be discovered
for a selected IP Address FEC
type=int default=128 minimum=1 maximum=128 Displayed(tab/group)=Maximum Paths (Ecmp/Path Discovery) |
| autoPolicy1 |
The route policy statement name.
type=Pointer default= Displayed(tab/group)=Policy Statement 1 (Ecmp/Path Discovery) |
| autoPolicy2 |
The route policy statement name.
type=Pointer default= Displayed(tab/group)=Policy Statement 2 (Ecmp/Path Discovery) |
| autoPolicy3 |
The route policy statement name.
type=Pointer default= Displayed(tab/group)=Policy Statement 3 (Ecmp/Path Discovery) |
| autoPolicy4 |
The route policy statement name.
type=Pointer default= Displayed(tab/group)=Policy Statement 4 (Ecmp/Path Discovery) |
| autoPolicy5 |
The route policy statement name.
type=Pointer default= Displayed(tab/group)=Policy Statement 5 (Ecmp/Path Discovery) |
| autoPrMaxFailures |
Specifies the maximum number of consecutive timeouts allowed before
failing a path probe (ping).
type=int default=3 minimum=1 maximum=10 Displayed(tab/group)=Retry Count (Ecmp/Path Probing) |
| autoPrTimeOut |
Specifies the time-out value, in minutes, for a ping request during
probing. autoPrTimeOut cannot be greater than autoProbeIntvl.
type=int default=1 minimum=1 maximum=3 units=Minutes Displayed(tab/group)=Probe Timeout (Ecmp/Path Probing) |
| autoProbeIntvl |
Specifies the number of minutes to wait before repeating probing
(pinging) a discovered path.
type=int default=1 minimum=1 maximum=60 units=Minutes Displayed(tab/group)=Probe Interval (Ecmp/Path Probing) |
| autoRowStatus |
The value of autoRowStatus specifies the row status of
the Auto LDP Tree Trace instance for the virtual router.
A row with default attribute values is created by setting
autoRowStatus to 'create'. A row entry can be destroyed by
setting tmnxOamLTtraceAutoRowStatus to 'destroy'. An attempt
to destroy a row will fail if autoAdminState is not set to 'outOfService'.
type=ldp.EcmpTreeTrace default=notConfigured Displayed(tab/group)=Tree Trace (Ecmp) |
| autoStorageType |
Specifies the storage type for this conceptual row.
Conceptual rows having the value 'permanent' need not
allow write-access to any columnar objects in the row
type=qos.StorageType default=nonVolatile |
| autoTotalFecs |
Indicates the number of Address FECs that have been selected
for discovery during the current discovery process.
An Address FEC imported from an LDP peer
(TIMETRA-LDP-MIB:: vRtrLdpAddrFecTable)is selected
if it passes the associated policies (tmnxOamLTtraceAutoPolicy1..
tmnxOamLTtraceAutoPolicy5).
type=int access=read-only default=0 Displayed(tab/group)=Total FECs (Ecmp/Autodiscovery Results) |
| autoTrMaxFailures |
Specifies the maximum number of consecutive timeouts allowed before
terminating an lsp trace request to a hop.
type=int default=3 minimum=1 maximum=10 Displayed(tab/group)=Retry Count (Ecmp/Path Discovery) |
| autoTrMaxTtl |
Specifies the maximum label time-to-live value for an Lsp trace
request during the tree discovery."
type=int default=30 minimum=1 maximum=255 Displayed(tab/group)=Maximum TTL (Ecmp/Path Discovery) |
| autoTrTimeOut |
Specifies the specifies the time-out value, in seconds,
for an lsp trace request during the tree discovery.
type=int default=30 minimum=1 maximum=60 units=Seconds Displayed(tab/group)=Discovery Timeout (Ecmp/Path Discovery) |
| creationOrigin |
type=svt.L2RouteOriginType access=read-create default=manual |
| forwardingClass |
The value of forwardingClassspecifies the forwarding class
of the MPLS Echo request packets.
The forwarding class name must be one of those defined in the
tFCNameTable in TIMETRA-QOS-MIB. The agent creates predefined
entries in the tFCNameTable for 'premium', 'assured', and 'be'
(for best-effort) forwarding classes. The actual forwarding
class encoding is controlled by the network egress LSP-EXP
mappings."
type=qos.FcEnum default=be Displayed(tab/group)=Forwarding Class (Ecmp/Path Discovery) |
| policy1 |
type=string access=read-only default= maximum=32 |
| policy2 |
type=string access=read-only default= maximum=32 |
| policy3 |
type=string access=read-only default= maximum=32 |
| policy4 |
type=string access=read-only default= maximum=32 |
| policy5 |
type=string access=read-only default= maximum=32 |
| profile |
The value of tmnxOamLTtraceAutoProfile specifies the profile value to
be used with the forwarding class specified in tmnxOamLTtraceAutoFcName.
The profile value must be consistent with the specified forwarding
class:
'assured' = 'in' or 'out'
'premium' = 'in'
'be' = 'out'
type=qos.Profile default=out Displayed(tab/group)=Profile (Ecmp/Path Discovery) |
| vRtrID |
type=int default=1 minimum=1 |
| Properties inherited from ManagedObject |
|---|
| actionMask, children-Set, deploymentState, isFaultSquelched, name, objectFullName, selfAlarmed |
| Supported Network Elements | |
|---|---|
| 7750 SR | |
| 7705 SAR Gen 2 | |
| 7705 SAR Hm | |
| 7450 ESS | |
| DC VSC | |
| DC 7850 | |
| DC 210 | |
| DC VSA8 | |
| 7950 XRS | |
| 7705 SAR | Supported from 6.0.R2 |
| 7705 SAR H | Supported from 6.1.R1 |
| 7210 SAS T |
Supported from 7.0.R4
|
| 7210 SAS R | Supported from 7.0.R4 |
| 7250 IXR | |