| Overview | Package | Class | Deprecated | Help |
| Properties | |
|---|---|
| actualVlanSubType |
The actual service SubType is to specify the Service that is actually configured on
the node.
type=vlan.VlanSubType access=read-only Displayed(tab/group)=Resynced Application (VLAN) |
| cfmPrimaryVlanSitePointer |
type=Pointer access=read-only default= Displayed(tab/group)=cfmPrimaryVlanSitePointer (CFM.General/Primary Vlan) |
| cfmVlanAssociation |
type=int access=read-only default=primary Displayed(tab/group)=CFM Association (CFM.General) enums= 1: primary - Primary 2: nonprimary - Non-Primary |
| cfmVlanMaintDomainLevel |
type=int default=-1 minimum=-1 maximum=7 Displayed(tab/group)=Level (CFM.General/Default Maintenance Domain) |
| cfmVlanMaintDomainStatus |
type=generic.TruthValue access=read-only default=true Displayed(tab/group)=Status (CFM.General/Default Maintenance Domain) |
| cfmVlanMhfCreation |
type=int default=defer Displayed(tab/group)=MHF-Creation (CFM.General/Default Maintenance Domain) enums= 1: none - none 2: default - default 3: explicit - explicit 4: defer - defer |
| cfmVlanMhfIdPermission |
type=ethernetoam.Dot1agCfmIdPermissionEnum default=sendIdNone Displayed(tab/group)=ID-Permission (CFM.General/Default Maintenance Domain) |
| enable1x1Stp |
type=generic.TruthValue default=true Displayed(tab/group)=Enable 1x1 STP (STP) |
| enableAuthentication |
type=generic.TruthValue default=false Displayed(tab/group)=Enable Authentication (VLAN) |
| enableFlatStp |
type=generic.TruthValue default=true Displayed(tab/group)=Enable Flat STP (STP) |
| enableMobileTag |
type=generic.TruthValue default=false Displayed(tab/group)=Enable Mobile-Tag (VLAN) |
| enableStp |
type=generic.TruthValue default=true Displayed(tab/group)=Enable STP (STP) |
| igmp.Site-Set |
type=Children-Set |
| igmpSnoopingImmediateLeave |
Enable IGMP (Internet Group Management Protocol) Immediate-Leave processing on the
VLAN interface.
type=boolean access=read-only default=false |
| ipEnabled |
type=generic.TruthValue access=read-only default=false Displayed(tab/group)=IP Enabled (VLAN) |
| ipmVlanSubType |
The actual IPMVLAN SubType.
type=vlan.IpmVlanSubType access=read-only default=stacking Displayed(tab/group)=SubType (IPMVLAN Type) |
| ipv6RafVlanInterface |
type=string default= maximum=32 Displayed(tab/group)=RA Filter Interface (RA Filter.General) |
| ipv6RafVlanStatus |
type=int default=disabled Displayed(tab/group)=RA Filter Status (RA Filter.General) enums= 1: enabled - Enabled 2: disabled - Disabled |
| managementVlan |
This attribute is set to true if this VLAN ID is considered as being
a management VLAN across the Ring Group.
type=boolean default=false Displayed(tab/group)=Management VLAN (VLAN) |
| managementVlanConflict |
This attribute will be set to true if we find out that a VLAN ID being assigned
to a service of type Management is also being used for another type of service.
type=boolean access=read-only default=false |
| mld.Site-Set |
type=Children-Set |
| mtuValue |
type=int default=1500 minimum=1280 maximum=9198 units=bytes Displayed(tab/group)=MTU (VLAN) |
| multicast.AddressElem-Set |
type=Children-Set |
| multicast.CustomerVlanTag-Set |
type=Children-Set |
| networkPortPointer |
Interface id of the network port (Radio port)
type=Pointer access=read-create default= Mandatory on create Displayed(tab/group)=Network Port (Network Port) |
| numberOfLayer2NetworkInterfaces |
Counter of the number of L2 Network Interfaces associated to this Service on the Site.
type=long access=read-only default=0 |
| sourceLearning |
type=generic.TruthValue default=true Displayed(tab/group)=Source Learning (VLAN) |
| stpMstiPointer |
Pointer to the STP MSTI object.
type=Pointer access=read-only default= Displayed(tab/group)=MSTI (STP) |
| tailTerminatingPointer |
Interface id of the network port which is terminating on the tail of the ERPS (Radio port)
DEPRECATED: 12.0 R7 - Radio port can be added as access, tailTerminatingPointer is deprecated type=Pointer default= |
| udprelay.DHCPSnoopingBinding-Set |
type=Children-Set |
| udprelay.DHCPSnoopingVLAN-Set |
type=Children-Set |
| udprelay.DHCPv6SnoopingVLAN-Set |
type=Children-Set |
| udprelay.RAFilter-Set |
type=Children-Set |
| vlan.BVlanConfiguration-Set |
type=Children-Set |
| vlan.CFMNonPrimaryVlanBinding-Set |
type=Children-Set |
| vlan.EthernetService-Set |
type=Children-Set |
| vlan.L2AccessInterface-Set |
type=Children-Set |
| vlan.SuperVlanSite-Set |
type=Children-Set |
| vlanId |
type=int access=read-create default=0 |
| vlanSubType |
The service SubType is to specify if this Service is being used for
TLS, MVR, SuperVLAN, Management or Standard VLAN (Could be more in the future).
type=vlan.VlanSubType access=read-only Displayed(tab/group)=Application (VLAN) |
| vlanSubTypeBitmask |
Service Sub Type in the format of a bitmask.
type=vlan.VlanSubTypeBitmask access=read-only |
| vlanSubTypeConflict |
This attribute will be set to true if the operator creates or if NFM-P is
resyncing two different types of services with the same VLAN ID. For
example, if we have VLAN 5 being used for TLS and MVR at the same time,
this attribute will be set to true and an alarm will be raised.
type=boolean access=read-only default=false |
| Properties inherited from ManagedObject |
|---|
| actionMask, children-Set, deploymentState, isFaultSquelched, name, objectFullName, selfAlarmed |
| Methods inherited from service.Site |
|---|
| findSitesFor, shutDown, turnUp |