| Overview | Package | Class | Deprecated | Help |
| Properties | |
|---|---|
| autoCreate |
type=generic.TruthValue access=read-only default=false Displayed(tab/group)=Auto Created (Protocol Properties) |
| bfdEnabled |
specifies whether Bi-directional Forwarding Detection is enabled in this
interface. When the value is 'true', this interface can establish BFD sessions
and use BFD as a signalling mechanism. When it is 'false', it cannot
use BFD.
type=boolean default=false Displayed(tab/group)=BFD Enabled (Protocol Properties) |
| creationOrigin |
type=svt.L2RouteOriginType access=read-create default=manual |
| creator |
This value indicates the creator of this targeted peer.
type=ldp.CreatorType access=read-only default=manual Displayed(tab/group)=Creator (Protocol Properties) |
| enableHelloReduction |
The Enable Hello Reduction parameter specifies whether hello reduction is enabled for the targeted peer.
When hello reduction is enabled, hello messages are suppressed when a targeted LDP session is established
between two peers. If the parameter is disabled while the targeted LDP session to the peer is operationally up,
the change in the hold time will take effect only when the targeted LDP session is reestablished.
type=generic.TruthValue default=false Displayed(tab/group)=Enable Hello Reduction (Protocol Properties/Timer Control) |
| helloFactor |
type=int default=3 minimum=1 maximum=255 Displayed(tab/group)=Hello Factor (Protocol Properties/Timer Control) |
| helloReductionFactor |
The Hello Reduction Factor parameter specifies the number of hello messages that are sent
within the hold time interval when hello reduction is enabled.
type=int default=3 minimum=3 maximum=20 Displayed(tab/group)=Hello Reduction Factor (Protocol Properties/Timer Control) |
| helloTimeout |
type=int default=15 minimum=2 maximum=65535 units=seconds Displayed(tab/group)=Hello Timeout (Protocol Properties/Timer Control) |
| inheritanceMask |
type=long default=0 bits= 0x1: keepAliveFactor - Keep-Alive Factor 0x2: keepAliveTimeout - Keep-Alive Timeout 0x4: helloFactor 0x8: helloTimeout 0x10: backoffTime 0x20: maxBackoffTime 0x40: transportAddrType 0x80: passiveMode 0x100: enableHelloReduction 0x200: helloReductionFactor |
| interfaceId |
type=int access=read-only default=0 |
| keepAliveFactor |
type=int default=3 minimum=1 maximum=255 Displayed(tab/group)=Keep-Alive Factor (Protocol Properties/Timer Control) |
| keepAliveTimeout |
type=int default=30 minimum=2 maximum=65535 units=seconds Displayed(tab/group)=Keep-Alive Timeout (Protocol Properties/Timer Control) |
| localLsrId |
The ID of the local interface to be used as source LSR-ID to establish
targeted hello adjacency with a LDP peer.
type=long access=read-only default=0 |
| localLsrIfName |
The name of the local interface to be used as source LSR-ID to establish
targeted hello adjacency with a LDP peer.
type=string access=read-only default= Displayed(tab/group)=LSR Interface Name (Protocol Properties) |
| localLsrPointer |
The local interface pointer.
type=Pointer default= Displayed(tab/group)=Local LSR ID (Protocol Properties/Local LSR) |
| lspPointers |
Set of LSPs this LDP targeted peer is associated with for the purpose of tunneling.
type=Set (Pointer) |
| lsr32BitFormat |
specifies whether to use
32-bit address as source Label Switch Router identifier (LSR-ID) to
establish a targeted LDP adjacency with a LDP peer. This value can be
only be set to true if vRtrLdpNgTargPeerLsrIfIndex is set to non-zero
value and vRtrLdpNgPeerAddressType is ipv6.
type=boolean default=false Displayed(tab/group)=Support 32 Bit Format (Protocol Properties/Local LSR) |
| mcastLspPointers |
Set of LSPs this LDP targeted peer is associated with for the purpose of Multicast tunneling.
type=Set (Pointer) |
| mcastTunnelingEnabled |
Specifies whether tunneling of multicast LDP FECs over tunnels is enabled. When this object has a value of
'true', tunneling is enabled. When its value is 'false', tunneling is disabled.
type=boolean default=false Displayed(tab/group)=Multicast Tunneling Enabled (Protocol Properties) |
| operDownReasonCode |
Indicates the reason due to which the targated peer is operationally down
type=ldp.LdpIfOperDownReasonCode access=read-only default=operUp Displayed(tab/group)=Operational State Down Reason (Protocol Properties) |
| operHelloTimeout |
This value indicates the operational hello time also known as hold time used by the operational targeted
peer or LDP interface. It is the time interval that LDP waits before declaring a neighbor to be down.
type=int access=read-only default=3 minimum=3 maximum=65535 units=seconds Displayed(tab/group)=Operational Hold Time (Protocol Properties/Timer Control) |
| passiveMode |
type=generic.TruthValue access=read-only default=false Displayed(tab/group)=Passive Mode (Protocol Properties) |
| templateName |
Specifies the template name that created this Targeted Peer.
This value is valid when the value of creator is 'template'.
type=string access=read-only default= Displayed(tab/group)=Template Name (Protocol Properties) |
| tunnelingEnabled |
Specifies whether tunneling of LDP over tunnels is enabled.
type=boolean default=true Displayed(tab/group)=Tunneling Enabled (Protocol Properties) |
| Overridden Properties | |
|---|---|
| administrativeState |
default=tmnxInService |
| Properties inherited from rtr.Peer |
|---|
| description, groupName, peerAddress, peerAddressType, routingInstance, routingInstanceName, serviceId, serviceType, siteId, siteName, subscriberId |
| Properties inherited from netw.Connection |
|---|
| administrativeState, application, connectionId, operationalState |
| Properties inherited from ManagedObject |
|---|
| actionMask, children-Set, deploymentState, isFaultSquelched, name, objectFullName, selfAlarmed |
| Methods |
|---|
filter
: FilterHolder -
resultFilter
: ResultFilter - (Optional) Filter for narrowing down the information returned per object
continueOnFailure
: continueOnFailure - (Optional) Continue processing requests in this stream if an exception occurs, unless the request is invalid. Default: false
infoList
: List (generic.CommonManagedEntityInformation) - | Methods inherited from rtr.Peer |
|---|
| remove, shutDown, turnUp |