| Overview | Package | Class | Deprecated | Help |
| Properties | |
|---|---|
| enablePortId |
Indicates whether the port-id of the system is to be included in the mirrored packets.
Applies only when encapsulationType is set to PPP.
type=generic.TruthValue default=false Displayed(tab/group)=Enable Port ID Mirroring (Mirroring Configuration) |
| encapsulationType |
type=mirror.EncapsulationType access=read-create default=ether Displayed(tab/group)=Encapsulation Type |
| fcProfile |
Specifies whether packets in a given forwarding class are considered in-profile or out-of-profile.
In-profile packets have a higher transmission priority than out-of-profile packets.
type=qos.Profile default=out Displayed(tab/group)=Profile (Mirroring Configuration) |
| forwardingClass |
type=qos.FcEnum default=be Displayed(tab/group)=Forwarding Class (Mirroring Configuration) |
| mirror.Endpoint-Set |
type=Children-Set |
| mirror.L2AccessInterface-Set |
type=Children-Set |
| mirror.Layer3Encapsulation-Set |
type=Children-Set |
| mirror.PcapSession-Set |
type=Children-Set |
| mirror.RemoteSource-Set |
type=Children-Set |
| mirror.SourceAggregateFilter-Set |
type=Children-Set |
| mirror.SourceIngressLabel-Set |
type=Children-Set |
| mirror.SourceInterface-Set |
type=Children-Set |
| mirror.SourceIpFilter-Set |
type=Children-Set |
| mirror.SourceIpv6Filter-Set |
type=Children-Set |
| mirror.SourceMacFilter-Set |
type=Children-Set |
| mirror.SourcePort-Set |
type=Children-Set |
| mirror.SourceSubscriberHost-Set |
type=Children-Set |
| mirror.SourceVlanFilter-Set |
type=Children-Set |
| mirrorSiteType |
type=mirror.MirrorSiteType access=read-create default=source Displayed(tab/group)=Site Type |
| mirrorSourceType |
Specifies if the mirror services support local mirror sources,
remote mirror sources or both
type=mirror.MirrorSourceType default=local Displayed(tab/group)=Source Type |
| mirrorSrcCreationOrigin |
Specifies the protocol or mechanism that created conceptual row in mirror source entry.
type=mirror.MirrorSrcCreationOriginType default=unspecified Displayed(tab/group)=Mirror Source Creation Origin (Mirroring Configuration) |
| mirrorli.LIMirrorSiteCfg-Set |
type=Children-Set |
| mirrorli.LISourceCfg-Set |
type=Children-Set |
| mirrorli.LISourceInterface-Set |
type=Children-Set |
| mirrorli.LISourceIpFilter-Set |
type=Children-Set |
| mirrorli.LISourceIpv6Filter-Set |
type=Children-Set |
| mirrorli.LISourceLiIpFilter-Set |
type=Children-Set |
| mirrorli.LISourceLiIpv6Filter-Set |
type=Children-Set |
| mirrorli.LISourceLiMacFilter-Set |
type=Children-Set |
| mirrorli.LISourceMacFilter-Set |
type=Children-Set |
| mirrorli.LISourcePort-Set |
type=Children-Set |
| mirrorli.LISourceSubscriberHost-Set |
type=Children-Set |
| mirrorli.LISubHostRadius-Set |
type=Children-Set |
| mirrorli.LiNat64LsnSub-Set |
type=Children-Set |
| mirrorli.LiNatClassicLsnSub-Set |
type=Children-Set |
| mirrorli.LiNatDsLiteLsnSub-Set |
type=Children-Set |
| mirrorli.LiNatEthernetHeader-Set |
type=Children-Set |
| mirrorli.LiNatL2AwareSub-Set |
type=Children-Set |
| mirrorli.LiWlanDsmSub-Set |
type=Children-Set |
| perLagHashing |
Specifies whether the system will allow hashing the mirror-destination entry over a LAG
type=boolean default=false Displayed(tab/group)=Per LAG Hashing |
| remoteSourceCapable |
Specifies whether the sources of the mirrored packets can be on remote sites.
If you set this parameter to false, remote source access is not allowed to the mirror destination.
type=generic.TruthValue default=false Displayed(tab/group)=Remote Source Capable (Mirroring Configuration) |
| sliceSize |
type=long default=0 minimum=0 maximum=9216 Displayed(tab/group)=Slice Size (Mirroring Configuration) |
| sourceAdministrativeState |
type=mirror.SourceAdministrativeState default=unspecified Displayed(tab/group)=Source Administrative State (Mirroring Configuration) |
| svt.MirrorSdpBinding-Set |
type=Children-Set |
| topologyAutoCompletion |
IMPORTANT: Used internally by NFM-P, clients - other than NFM-P GUI - should not use this property.
Value is copied from the parent (service).
Whether NMS should automatically create the Mesh SDP bindings.
If 'false' the user has to manually create the SDP bindings.
type=boolean access=read-only |
| useMirrorGlobalSamplingRate |
Specifies whether mirror destination is using the system wide globally configured sample rate
or not. If it is set to 'true', value of netw.NetworkElement.mirrorGlobalSamplingRate will
indicate globally configured sample rate.
type=boolean default=false Displayed(tab/group)=Use Global Sampling Rate (Mirroring Configuration) |
| Properties inherited from ManagedObject |
|---|
| actionMask, children-Set, deploymentState, isFaultSquelched, name, objectFullName, selfAlarmed |
| Methods inherited from service.Site |
|---|
| findSitesFor, shutDown, turnUp |