| Overview | Package | Class | Deprecated | Help |
| Properties | |
|---|---|
| creationOrigin |
type=svt.L2RouteOriginType access=read-create default=manual |
| dstInstance |
Indicates the destination instance for this neighbor
type=long access=read-only Displayed(tab/group)=Destination Instance (/Neighbor Router) |
| epochNum |
Indicates the epoch number received from the neighbor.
type=long access=read-only Displayed(tab/group)=Epoch Number (/Neighbor Router) |
| flags |
Indicates the set of properties for this RSVP neighbor
type=rsvp.Flags access=read-only Displayed(tab/group)=Flags (/Neighbor Router) |
| grHelperInvkCnt |
Indicates the number of times that GR helper procedure has been invoked.
type=long access=read-only Displayed(tab/group)=GR Proc Invoked Count (/Grace Helper) |
| grHelperTimeRem |
Indicates the amount of time remaining, in seconds, for the restart phase or recovery phase to timeout.
type=long access=read-only units=seconds Displayed(tab/group)=GR Helper Time Remaining (/Grace Helper) |
| grRecoveryTime |
Indicates the recovery timer advertised by the neighbor.
type=long access=read-only units=milliseconds Displayed(tab/group)=GR Nbr Recovery Time (/Grace Helper) |
| grRestartCap |
Indicates whether or not the neighbor supports graceful restart.
type=boolean access=read-only Displayed(tab/group)=GR Nbr Restart Cap (/Grace Helper) |
| grRestartTime |
Indicates the restart timer advertised by the neighbor.
type=long access=read-only units=milliseconds Displayed(tab/group)=GR Nbr Restart Time (/Grace Helper) |
| grState |
Indicates the current state of the neighbor after loss of communication.
type=rsvp.GrStates access=read-only Displayed(tab/group)=GR Helper State (/Grace Helper) |
| helloRefreshTimeRemain |
Indicates the time remaining in the hello refresh timer.
When the hello refresh timer expired, a Hello message will be sent
to the neighbor
type=long access=read-only units=seconds Displayed(tab/group)=Hello Refresh Time Remaining (/Neighbor Router) |
| helloTimeoutTimeRemain |
Indicates the time remaining in the hello timeout timer.
If a Hello message is not received from the
neighbor before this timer expires, the neighbor will
be considered operationally down.
type=long access=read-only units=seconds Displayed(tab/group)=Hello Timeout Time Remaining (/Neighbor Router) |
| helloTimeouts |
Indicates number of times hello
timeout timer expired for the neighbor.
type=long access=read-only default=0 Displayed(tab/group)=Hello Timeouts Count (/Neighbor Router) |
| instanceMismatch |
Indicates number of times the source and
destination instances received in a Hello
message did not match the destination and
source instance for this neighbor.
type=long access=read-only default=0 Displayed(tab/group)=Instance Mismatch Count (/Neighbor Router) |
| interfaceId |
type=long access=read-only default=0 Displayed(tab/group)=Interface ID (/This Router) |
| interfaceName |
type=string access=read-only default=0.0.0.0 maximum=252 Displayed(tab/group)=Interface Name (/This Router) |
| lastOperChange |
Indicates the time interval which has elapsed since
the RSVP neighbor's operational state last changed.
type=Date access=read-only default=0 Displayed(tab/group)=Last Operational Change (/Neighbor Router) |
| maxMsgId |
Indicates the highest message ID received from neighbor.
type=long access=read-only Displayed(tab/group)=Maximum Message Id (/Neighbor Router) |
| neighborInterfaceId |
type=long access=read-only default=0 Displayed(tab/group)=Neighbor Interface ID (/Neighbor Router) |
| neighborInterfaceName |
type=string access=read-only default=N/A maximum=252 Displayed(tab/group)=Neighbor Interface Name (/Neighbor Router) |
| neighborIpAddress |
type=InetAddress access=read-create Mandatory on create Displayed(tab/group)=Neighbor IP Address (/Neighbor Router) |
| neighborIpAddressType |
type=rtr.InetAddressType access=read-create default=ipv4 |
| neighborSiteId |
type=string access=read-only default=0.0.0.0 maximum=50 Displayed(tab/group)=Neighbor Site ID (/Neighbor Router) |
| neighborSiteName |
type=string access=read-only default=N/A maximum=252 Displayed(tab/group)=Neighbor Site Name (/Neighbor Router) |
| operationalState |
Indicates the current operational state of the RSVP neighbor
type=netw.OperationalState access=read-only default=tmnxUnknown Displayed(tab/group)=Operational State (/Neighbor Router) |
| outOfOrderMsgs |
Indicates the number of out of
order messages received from the neighbor.
type=long access=read-only default=0 Displayed(tab/group)=Out Of Order Msgs Count (/Neighbor Router) |
| protocol |
type=int access=read-create default=IP Displayed(tab/group)=Protocol enums= 1: IP (not selectable) 2: UDP (not selectable) 3: IPandUDP - IP and UDP (not selectable) |
| retransmittedMsgs |
Indicates the number of times messages have
been retransmitted to the neighbor because the
neighbor did not acknowledge that it received the message.
type=long access=read-only default=0 Displayed(tab/group)=Retransmitted Msgs Count (/Neighbor Router) |
| routerId |
type=int access=read-only default=0 Displayed(tab/group)=Routing Instance (/This Router) |
| siteId |
type=string access=read-only default=0.0.0.0 maximum=50 Displayed(tab/group)=Site ID (/This Router) |
| siteName |
type=string access=read-only default=0.0.0.0 maximum=252 Displayed(tab/group)=Site Name (/This Router) |
| srcInstance |
Indicates the source instance for this neighbor
type=long access=read-only Displayed(tab/group)=Source Instance (/Neighbor Router) |
| srefreshTimeRemain |
Indicates the time remaining in the refresh timer.
An refresh message will be sent when this timer expires.
type=long access=read-only units=seconds Displayed(tab/group)=Srefresh Time Remaining (/Neighbor Router) |
| Properties inherited from ManagedObject |
|---|
| actionMask, children-Set, deploymentState, isFaultSquelched, name, objectFullName, selfAlarmed |
| Methods |
|---|
filter
: FilterHolder -
resultFilter
: ResultFilter - (Optional) Filter for narrowing down the information returned per object
continueOnFailure
: continueOnFailure - (Optional) Continue processing requests in this stream if an exception occurs, unless the request is invalid. Default: false
infoList
: List (generic.CommonManagedEntityInformation) - | Supported Network Elements | |
|---|---|
| 7450 ESS | |
| 7750 SR | |
| 7705 SAR Gen 2 | |
| 7705 SAR Hm | |
| 7705 SAR | |
| 7705 SAR H | |
| DC VSC | |
| DC 7850 | |
| DC 210 | |
| DC VSA8 | |
| 7950 XRS | |
| 7250 IXR | Supported from 19.7.R1 |
| Product Specifics | |
| 7705 SAR H 20.0 | |
| 7705 SAR H 21.0 | |
| 7705 SAR H 22.0 | |
| 7705 SAR H 23.0 | |
| 7705 SAR H 24.0 | |
| 7705 SAR H 25.0 | |
| 7705 SAR H 9.0 | |
| 7705 SAR 20.0 | |
| 7705 SAR 21.0 | |
| 7705 SAR 22.0 | |
| 7705 SAR 23.0 | |
| 7705 SAR 24.0 | |
| 7705 SAR 25.0 | |