| Overview | Package | Class | Deprecated | Help |
| Properties | |
|---|---|
| acknowledgeACCM |
Specifies if this system acknowledges the LCP Asynchronous Control Character Map (ACCM)
configuration option during the LCP negotiation phase
type=l2tp.AlwaysNeverDefault default=never Displayed(tab/group)=Acknowledge LCP Asynchronous Control Character Map (/LNS LCP Negotiation Information) |
| authenticationPolicy |
Specifies the authentication policy used by this system for the tunnels in this
L2TP Tunnel Group during the authentication phase of tunnel establishment.
type=string default= Displayed(tab/group)=Authentication Policy |
| authenticationProtocol |
Specifies what PPP authentication protocol(s) will be negotiated during the LCP
phase for the tunnels in this group profile.
type=l2tp.PPPAuthentication default=prefChap Displayed(tab/group)=Authentication Protocol |
| creationOrigin |
type=svt.L2RouteOriginType access=read-create default=manual |
| defaultGroupIf |
Specifies the name of the group interface where the PPP sessions are established.
type=string default= minimum=0 maximum=32 Displayed(tab/group)=Interface Name (/Default Group Interface) |
| defaultGroupIfPointer |
Specifies the FDN of the group interface where the PPP sessions are established.
type=Pointer default= |
| defaultServiceID |
Specifies the service ID of the service where the PPP sessions are established.
type=long default=0 minimum=0 maximum=2147483648 Displayed(tab/group)=Service ID (/Default Service) |
| defaultServiceIdPointer |
Specifies the FDN of the service where the PPP sessions are established.
type=Pointer default= |
| groupName |
The group profile name.
type=string access=read-only |
| ipcpNegotiation |
Specifies for the tunnels in this L2TP LNS Tunnel Group if IPCP subnet negotiation is enabled.
type=l2tp.AlwaysNeverDefault default=never Displayed(tab/group)=IPCP Subnet Negotiation |
| keepAliveInterval |
Specifies for the tunnels using the Tunnel Group Profile
the time interval in seconds at which LCP echo requests are transmitted.
type=int default=30 minimum=10 maximum=300 units=seconds Displayed(tab/group)=Keep-Alive Interval |
| keepAliveMultiplier |
Specifies for the tunnels using the Tunnel Group Profile
how many LCP keepalive messages can be missed before the related session is brought down.
type=int default=3 minimum=1 maximum=5 Displayed(tab/group)=Keep-Alive Multiplier |
| lcpIgnoreMagicNum |
Specifies if checking the Magic-Number field in LCP Echo-Request and
Echo-Reply messages is skipped.
type=l2tp.AlwaysNeverDefault default=never Displayed(tab/group)=LCP Ignore Magic Number |
| maxChapChallenge |
type=int default=64 minimum=8 maximum=64 Displayed(tab/group)=Max (/CHAP Challenge Length) |
| minChapChallenge |
type=int default=32 minimum=8 maximum=64 Displayed(tab/group)=Min (/CHAP Challenge Length) |
| mtu |
Specifies the MTU for the tunnels using this Tunnel Group Profile
type=int default=1500 minimum=512 maximum=9212 units=bytes Displayed(tab/group)=MTU |
| proxyAuthentication |
Specifies if this system re-uses the authentication done by the proxy.
type=l2tp.AlwaysNeverDefault default=never Displayed(tab/group)=Proxy Authentication |
| proxyLcp |
Specifies if this system re-uses the result of the Link Control Protocol (LCP)
negotiation done by the proxy.
type=l2tp.AlwaysNeverDefault default=never Displayed(tab/group)=Proxy LCP |
| rejectDisabledNcp |
Specifies for the tunnels in this L2TP LNS Tunnel Group whether disabled NCP's (Network Control Protocol)
are rejected or silently ignored.
When the value of this object is set to 'always(3)' then disabled NCP's are rejected explicitly.
type=l2tp.AlwaysNeverDefault default=never Displayed(tab/group)=Reject Disabled NCP |
| routerId |
Router Identifier of the routing protocol site where the Tunnel Group Profile resides.
type=int access=read-only default=1 minimum=1 maximum=10240 |
| siteId |
NE ID where the group profile is created.
type=string access=read-only default= minimum=0 maximum=64 |
| userDB |
Specifies the local user database to use for PADI or PPP PAP/CHAP based
authentication during the authentication phase of tunnel establishment.
type=string default= Displayed(tab/group)=User Database |
| Properties inherited from ManagedObject |
|---|
| actionMask, children-Set, deploymentState, isFaultSquelched, name, objectFullName, selfAlarmed |
| Supported Network Elements | |
|---|---|
| 7750 SR |
Supported until 13.0.R1
|
| 7450 ESS |
Supported from 11.0.R4
|
| Product Specifics | |
| 7450 ESS 20.0 | |
| 7450 ESS 21.0 | |
| 7450 ESS 22.0 | |
| 7450 ESS 23.0 | |
| 7450 ESS 24.0 | |
| 7450 ESS 25.0 | |
| 7750 SR 20.0 | |
| 7750 SR 21.0 | |
| 7750 SR 22.0 | |
| 7750 SR 23.0 | |
| 7750 SR 24.0 | |
| 7750 SR 25.0 | |