| Overview | Package | Class | Deprecated | Help |
| Properties | |
|---|---|
| creationOrigin |
type=svt.L2RouteOriginType access=read-create default=manual |
| disStatusBits |
Indicates the current discovery status bits for the Address FEC.
The value of DisStatusBits is an enumerated integer that describes the LDP tree
trace discovery status in BITS. This indicates different reason values when the
tree discovery of an IP Address FEC is not completely successful.
timeout (0) One or more trace requests for an IP Address FEC were timedout.
maxPath (1) reached the maximum allowed path limit for an IP Address FEC.
maxHop (2) reached the maximum allowed hop limit.
unexploredPath (3) could not discover all possible paths.
noResource (4) no more internal resource to complete the discovery.
type=ldp.DisStatusBits access=read-only default=timeout Displayed(tab/group)=Discovery Status |
| fecDisPaths |
Specifies the number of discovered ECMP paths for the Address FEC.
type=int access=read-only Displayed(tab/group)=Discovered Paths |
| fecDiscoveryState |
Indicates the current state of the discovery process for the Address FEC.
type=ldp.EcmpDiscoveryState access=read-only default=initial Displayed(tab/group)=Discovery State |
| fecFailedHops |
Specifies the number of hops from which no successful response was received.
type=int access=read-only Displayed(tab/group)=Failed Hops |
| fecFailedProbes |
Specifies the number of discovered paths which are in failed probing state.
type=int access=read-only Displayed(tab/group)=Failed Probes |
| fecLastDisEnd |
Indicates the sysUptime when the FEC was last discovered
type=Date access=read-only default=0 Displayed(tab/group)=Last Discovery End |
| fecPrefLen |
Denotes the length of a generic Internet network address prefix.
A value of n corresponds to an IP address mask that has n contiguous
1-bits from the most significant bit (MSB), with all other bits set to 0.
This value is always interpreted within the context of an fecPrefixType value.
Every usage of the InetAddressPrefixLength textual convention is required to
specify the InetAddressType object that provides the
context. It is suggested that the InetAddressType object be
logically registered before the object(s) that use the
InetAddressPrefixLength textual convention, if they appear
in the same logical row.
InetAddressPrefixLength values larger than
the maximum length of an IP address for a specific
InetAddressType are treated as the maximum significant
value applicable for the InetAddressType. The maximum
significant value is 32 for the InetAddressType
'ipv4(1)' and 'ipv4z(3)' and 128 for the InetAddressType
'ipv6(2)' and 'ipv6z(4)'. The maximum significant value
for the InetAddressType 'dns(16)' is 0.
The value zero is object-specific and must be defined as
part of the description of any object that uses this
syntax. Examples of the usage of zero might include
situations where the Internet network address prefix
is unknown or does not apply.
The upper bound of the prefix length has been chosen to
be consistent with the maximum size of an InetAddress."
type=int access=read-only Displayed(tab/group)=Prefix Length |
| fecPrefix |
Specifies the Internet address prefix for an LDP based LSP associated
with the OAM LDP Tree trace test.
type=InetAddress access=read-create default=0.0.0.0 Displayed(tab/group)=Prefix |
| fecPrefixType |
Specifies the type of remote IP address stored in
tmnxOamLTtraceFecPrefix. Currently only ipv4 type is supported.
type=rtr.InetAddressType access=read-create default=ipv4 Displayed(tab/group)=Prefix Type |
| fecProbeState |
The value of fecProbeState indicates the current overall probing state for
the discovered paths of the Address FEC.
The fecProbeState is considered as 'oK' when probing on all the associated
discovered paths is OK.
It is considered as 'failed' when probing on all the associated
discovered paths failed. It is considered as partially failed
when probing on one or more, but not all, discovered paths failed.
type=ldp.FecProbeState access=read-only default=ok Displayed(tab/group)=Probe State |
| fecSendErrProbes |
Specifies the number of discovered paths which are experiencing problems in sending probe
(ping) requests.
type=int access=read-only Displayed(tab/group)=Problematic Probes |
| ldp.DiscoveredPath-Set |
type=Children-Set |
| vRtrID |
type=int default=1 minimum=1 |
| Properties inherited from ManagedObject |
|---|
| actionMask, children-Set, deploymentState, isFaultSquelched, name, objectFullName, selfAlarmed |
| Supported Network Elements | |
|---|---|
| 7750 SR | |
| 7705 SAR Gen 2 | |
| 7705 SAR Hm | |
| 7450 ESS | |
| DC VSC | |
| DC 7850 | |
| DC 210 | |
| DC VSA8 | |
| 7950 XRS | |
| 7705 SAR | Supported from 6.0.R2 |
| 7705 SAR H | Supported from 6.1.R1 |
| 7210 SAS T |
Supported from 7.0.R4
|
| 7210 SAS R | Supported from 7.0.R4 |
| 7250 IXR | |
| Product Specifics | |
| 7705 SAR H 20.0 | |
| 7705 SAR H 21.0 | |
| 7705 SAR H 22.0 | |
| 7705 SAR H 23.0 | |
| 7705 SAR H 24.0 | |
| 7705 SAR H 25.0 | |
| 7705 SAR H 9.0 | |
| 7705 SAR 20.0 | |
| 7705 SAR 21.0 | |
| 7705 SAR 22.0 | |
| 7705 SAR 23.0 | |
| 7705 SAR 24.0 | |
| 7705 SAR 25.0 | |