pim
MvpnProviderTunnelUMHSRateMonitoring



public class MvpnProviderTunnelUMHSRateMonitoring

Properties
creationOrigin

type=svt.L2RouteOriginType
access=read-create
default=manual

groupAddress The value of groupAddress indicates the value of the address assigned to the group of umh-rate-monitoring to be used in UMH selection for MVPN source redundancy.

type=InetAddress
access=read-create
default=0.0.0.0
Displayed(tab/group)=Group Address

groupAddressMask The value of groupAddressMask indicates the mask for the group address groupAddress. For IPv4 address it is [0..32] and for IPv6 it is [0..128].

type=int
access=read-create
minimum=0
maximum=128
Mandatory on create
Displayed(tab/group)=Group Mask

groupAddressType The value of groupAddressType indicates the type of the address assigned to the group of umh-rate-monitoring indicated by groupAddress.

type=rtr.InetAddressType
access=read-create
default=ipv4

revertiveTimer The value of revertiveTimer indicates the revertive timer in seconds. once rate is recovered, this timer indicates after this amount of time the traffic is switched back to primary PMSI

type=int
default=0
minimum=0
maximum=3600
units=seconds
Displayed(tab/group)=Revertive Timer

routerId

type=int
access=read-only
default=1
minimum=1
maximum=10240

sourceAddress The value of sourceAddress indicates the value of the address assigned to the source of umh-rate-monitoring to be used in UMH selection for MVPN source redundancy.

type=InetAddress
access=read-create
default=0.0.0.0
Displayed(tab/group)=Source Address

sourceAddressMask The value of sourceAddressMask indicates the mask for the group address sourceAddress. For IPv4 address it is [0..32] and for IPv6 it is [0..128].

type=int
access=read-create
default=0
minimum=0
maximum=128
Displayed(tab/group)=Source Mask

sourceAddressType The value of sourceAddressType indicates the type of the address assigned to the source of umh-rate-monitoring indicated by sourceAddress.

type=rtr.InetAddressType
access=read-create
default=ipv4

trafficRateDelta The value of trafficRateDelta indicates the traffic rate 'delta' in kilobits per second(kbps). This value determines the rate difference threshold between two PMSIs. When the delta drops below the configured value, the traffic is switched.

type=long
default=0
minimum=0
maximum=4294967294
units=kbps
Displayed(tab/group)=Traffic Rate Delta

  
Properties inherited from ManagedObject
actionMask, children-Set, deploymentState, isFaultSquelched, name, objectFullName, selfAlarmed
 
Supported Network Elements
7750 SR Supported from 21.5.R1
7450 ESS Supported from 21.5.R1
7950 XRS Supported from 21.5.R1