| Overview | Package | Class | Deprecated | Help |
| Properties | |
|---|---|
| adminVersion |
type=mld.MldVersion default=version2 Displayed(tab/group)=Administrative Version (/States) |
| creationOrigin |
type=svt.L2RouteOriginType access=read-create default=manual |
| fwdServiceId |
type=long default=0 Displayed(tab/group)=Forwarding Service ID (/MLD Group Interface) |
| groupIfPointer |
type=Pointer access=read-create default= Mandatory on create Displayed(tab/group)=Group Interface (/MLD Group Interface) |
| importPlcyName |
The name of the MLD policy that is to be applied on SAPs belonging to this group-interface..
type=string default= minimum=0 maximum=32 Displayed(tab/group)=Import Policy (Behavior) |
| lastLstnrQryIntvl |
Specifies the Max Response Time inserted into Group-Specific Queries sent in response to
Leave Group messages, and is also the amount of time between Group-Specific Query messages.
This value may be tuned to modify the leave latency of the network. A reduced value
results in reduced time to detect the loss of the last member of a group.
type=int default=0 minimum=0 maximum=1023 units=seconds Displayed(tab/group)=Last Listener Query Interval (Behavior) |
| mCacAvailableMandatoryBw |
Indicates the pre-reserved bandwidth in kilo-bits per second(kbps) for the mandatory channels
for all SAPs belonging to this group-interface instance.
type=long access=read-only default=0 units=kbps Displayed(tab/group)=Available Bandwidth for Mandatory Channels (Multicast CAC.General) |
| mCacAvailableOptionalBw |
Indicates the available bandwidth in kilo-bits per second(kbps) for all SAPs belonging
to this group-interface instance.
type=long access=read-only default=0 units=kbps Displayed(tab/group)=Available Bandwidth for Optional Channels (Multicast CAC.General) |
| mCacBwValuesInTransit |
Indicates that the operational (available and in-use mandatory/optional) value for
the following objects are in transition due to configuration change:
vRtrMldGrpIfMcacAvailMandBw vRtrMldGrpIfMcacAvailOpnlBw vRtrMldGrpIfMcacinUseMandBw vRtrMldGrpIfMcacinUseOpnlBw.
When Multicast CAC Policy is applied on the group-interface for the join of the next channel,
the operational values will be recalculated and applied to the above objects and the value for
vRtrMldGrpIfMcacValuesInTransit will be set to 'false'.
If the value of vRtrMldGrpIfMcacValuesInTransit is 'true' then the values are in transition.
type=boolean access=read-only default=false Displayed(tab/group)=Bandwidth Values in Transit (Multicast CAC.General) |
| mCacConstAdminState |
Specifies the administrative state of the Multicast CAC policy's constraints.
type=netw.AdministrativeState default=tmnxInService Displayed(tab/group)=Constraint Administrative State (Multicast CAC.General) |
| mCacInUseMandatoryBw |
Indicates the in-use bandwidth in kilo-bits per second(kbps) for the mandatory channels
for all SAPs belonging to this protocol group-interface instance.
type=long access=read-only default=0 units=kbps Displayed(tab/group)=InUse Bandwidth by Mandatory Channels (Multicast CAC.General) |
| mCacInUseOptionalBw |
Indicates the in-use bandwidth in kilo-bits per second(kbps) for the optional channels
for all SAPs belonging to this protocol group-interface instance.
type=long access=read-only default=0 units=kbps Displayed(tab/group)=InUse Bandwidth by Optional Channels (Multicast CAC.General) |
| mCacPreRsvdMandatoryBw |
Specifies the bandwidth pre-reserved for all the mandatory channels on all SAPs
belonging to a given group-interface in kilo-bits per second(kbps).
If the value of Unconstrained Bandwidth is '0', no mandatory channels are allowed.
If the value of Unconstrained Bandwidth is '-1', then all mandatory and
optional channels are allowed.
If the value of Mandatory Bandwidth is equal to the value of Unconstrained Bandwidth,
then all the unconstrained bandwidth on all SAPs belonging to a given group-interface is allocated to
mandatory channels configured through multicast CAC policy on that group-interface and no optional
groups (channels) are allowed.
The value of Mandatory Bandwidth should always be less than or equal to that of Unconstrained Bandwidth.
An attempt to set the value of Mandatory Bandwidth greater than that of Unconstrained Bandwidth will result
in inconsistent value error.
type=int default=-1 minimum=-1 maximum=2147483647 units=kbps Displayed(tab/group)=Mandatory Bandwidth (Multicast CAC.General) |
| mCacUnconstrainedBw |
The bandwidth assigned for interface's multicast cac policy traffic
in kilo-bits per second(kbps). If the default value of '0' is set,
then the value will be set to the physical bandwidth available for
the interface.
type=int default=-1 minimum=-1 maximum=2147483647 units=kbps Displayed(tab/group)=Unconstrained Bandwidth (Multicast CAC.General) |
| mCastCacIntfPolicyPointer |
Pointer to the instance of the multicast cac interface policy object.
type=Pointer default= Displayed(tab/group)=Multicast CAC Interface Policy (Multicast CAC.General) |
| mCastCacPolicyName |
The name of the Multicast CAC policy.
type=string access=read-only default= minimum=0 maximum=32 |
| mCastCacPolicyPointer |
Pointer to the instance of the Multicast CAC policy object.
type=Pointer default= Displayed(tab/group)=Multicast CAC Policy (Multicast CAC.General) |
| maxGroups |
Specifies the maximum number of groups for which MLD can have local receiver information based on
received MLD reports on a SAP belonging to this group-interface.
When this configuration is changed dynamically to a value lower than currently accepted number of groups,
the groups that are already accepted are not deleted. Only new groups will not be allowed.
When this object has a value of 0, there is no limit to the number of groups.
type=long default=0 minimum=0 maximum=16000 Displayed(tab/group)=Maximum Number of Groups (Behavior) |
| maxGrpSources |
Specifies the maximum number of group sources for which MLD can have local receiver information based on received
MLD reports on a SAP belonging to this group-interface.
When this configuration is changed dynamically to a value lower than currently accepted number of group sources,
the group sources that are already accepted are not deleted. Only new group sources will not be allowed.
When this object has a value of 0, there is no limit to the number of group sources
type=long default=0 minimum=0 maximum=32000 Displayed(tab/group)=Maximum Number of Group Sources (Behavior) |
| maxSources |
Specifies the maximum number of sources for which MLD can have local receiver information based on received MLD
reports on a SAP belonging to this group-interface.
When this configuration is changed dynamically to a value lower than currently accepted number of sources,
the sources that are already accepted are not deleted. Only new sources will not be allowed.
When this object has a value of 0, there is no limit to the number of sources.
type=long default=0 minimum=0 maximum=1000 Displayed(tab/group)=Maximum Number of Sources (Behavior) |
| mld.GrpInterfaceSap-Set |
type=Children-Set |
| queryInterval |
Specifies the frequency at which the MLD Host-Query packets are transmitted for this group interface.
Valid range for query interval is 0 or 2..1024.
type=int default=0 minimum=0 maximum=1024 units=seconds Displayed(tab/group)=Query Interval (Behavior) |
| queryResponseIntvl |
Specifies maximum query response time advertised in MLD v2 queries for this group interface.
type=int default=0 minimum=0 maximum=1023 units=seconds Displayed(tab/group)=Response Query Interval (Behavior) |
| querySrcIpAddr |
Indicates the source IP address used when generating MLD queries on group interfaces.
Source Address must be Link-Local address.
type=InetAddress default=0:0:0:0:0:0:0:0 Displayed(tab/group)=Query Source IP Address (Behavior) |
| querySrcIpAddrType |
Indicates the type of address to be used for MLD query source IP address.
type=rtr.InetAddressType access=read-only default=ipv6 |
| rtrAlertCheckDisabled |
Enable/disable router alert checking for MLD messages received on SAPs belonging to this group-interface.
If this flag is set to 'true', checking is disabled.
type=generic.TruthValue default=false Displayed(tab/group)=Disable Router Alert Check (Behavior) |
| subHostsOnly |
Enable/disable handling of MLD joins received from hosts that are not known
in subscriber management or on which no MLD policy is applied.
If this flag is set to 'true', only traffic from MLD enabled hosts is allowed.
type=boolean default=true Displayed(tab/group)=Subscriber Hosts Only (Behavior) |
| subnetCheck |
Used to enable/disable subnet checking for MLD messages received on SAPs belonging to this group-interface.
If this flag is set to 'true', subnet checking is enabled. All MLD packets with a source address that is
not in the local subnet are dropped.
type=generic.TruthValue default=true Displayed(tab/group)=Subnet Check (Behavior) |
| Overridden Properties | |
|---|---|
| administrativeState |
default=tmnxInService |
| displayedName |
default=MLD Group Interface |
| operationalState |
default=tmnxOutOfService |
| Properties inherited from netw.RouterTerminatingNonIpInterface |
|---|
| additionalForNamingInterfaceName, interfaceId |
| Properties inherited from netw.RouterTerminatingInterface |
|---|
| interfaceClass, serviceId, serviceType, subscriberId |
| Properties inherited from netw.StatefullConnectableInterface |
|---|
| administrativeState, compositeState, encapType, operationalState, resourceState, underlyingResourceState |
| Properties inherited from netw.LogicalInterface |
|---|
| application, description, displayedName, domain, nodeId, nodeName |
| Properties inherited from ManagedObject |
|---|
| actionMask, children-Set, deploymentState, isFaultSquelched, name, objectFullName, selfAlarmed |
| Supported Network Elements | |
|---|---|
| 7750 SR | Supported from 12.0.R1 |
| 7450 ESS |
Supported from 12.0.R1
|
| Product Specifics | |
| 7450 ESS 20.0 | |
| 7450 ESS 21.0 | |
| 7450 ESS 22.0 | |
| 7450 ESS 23.0 | |
| 7450 ESS 24.0 | |
| 7450 ESS 25.0 | |
| 7750 SR 20.0 | |
| 7750 SR 21.0 | |
| 7750 SR 22.0 | |
| 7750 SR 23.0 | |
| 7750 SR 24.0 | |
| 7750 SR 25.0 | |