| Overview | Package | Class | Deprecated | Help |
| Properties | |
|---|---|
| adminVersion |
The configured version of MLD which is running for this SAP.
For MLD to function correctly, all routers on a LAN must be configured to run the same version of MLD on that LAN.
type=int access=read-only default=3 Displayed(tab/group)=MLD Configured Version |
| creationOrigin |
type=svt.L2RouteOriginType access=read-create default=manual |
| encapValue |
The value of the label used to identify this SAP on the access port specified by sapPortId.
type=long access=read-create default=0 minimum=0 maximum=4294967295 |
| fwdServiceId |
The forwarding service ID for a subscriber interface in a retailer context.
type=long access=read-create default=0 Displayed(tab/group)=Forwarding Service ID |
| groupCount |
The number of multicast groups which have been learned by the router for this SAP.
type=long access=read-only Displayed(tab/group)=Number Of Groups |
| groupIfIndex |
The unique value which identifies this interface of this virtual router.
type=long access=read-create Mandatory on create Displayed(tab/group)=Group Interface ID |
| lastLstnrQryIntvl |
Specifies the Max Response Time inserted into Group-Specific Queries sent in response to
Leave Group messages, and is also the amount of time between Group-Specific Query messages.
This value may be tuned to modify the leave latency of the network. A reduced value
results in reduced time to detect the loss of the last member of a group.
type=int access=read-only default=0 minimum=0 maximum=1023 units=seconds Displayed(tab/group)=Last Listener Query Interval |
| maxGroups |
The maximum number of groups for which MLD can have local receiver information based on
received MLD reports on this SAP.
When this configuration is changed dynamically to a value lower than currently accepted number of groups,
the groups that are already accepted are not deleted. Only new groups will not be allowed.
When this object has a value of 0, there is no limit to the number of groups.
type=long access=read-only default=0 minimum=0 Displayed(tab/group)=Maximum Number of Groups |
| maxGroupsTillNow |
The highest value that maxGroups had till now.
type=long access=read-only Displayed(tab/group)=Maximum Number of Groups Until Now |
| maxGrpSources |
Specifies the maximum number of group sources per group for which MLD can have
local receiver information based on received MLD reports on this SAP.
When this configuration is changed dynamically to a value lower than currently accepted number
of group sources, the group sources that are already accepted are not deleted. Only new group
sources will not be allowed.
When this object has a value of 0, there is no limit to the number of group sources.
type=long access=read-only default=0 minimum=0 maximum=1000 Displayed(tab/group)=Maximum Number Of Group Sources |
| maxSources |
Specifies the maximum number of sources per group for which MLD can have
local receiver information based on received MLD reports on this SAP.
When this configuration is changed dynamically to a value lower than
currently accepted number of sources, the sources that are already
accepted are not deleted. Only new sources will not be allowed.
When this object has a value of 0, there is no limit to the number of sources.
type=long access=read-only default=0 minimum=0 maximum=1000 Displayed(tab/group)=Maximum Number Of Sources |
| mld.GroupInterfaceSapGroup-Set |
type=Children-Set |
| nextGenQueryTime |
The time remaining before the general query is sent for this SAP.
If this router is the querier (vRtrMldIfQuerier is a local address), this property is the time remaining
before the general query is sent for this SAP. If this router is not the querier for the SAP, the value
of this object will be zero.
type=long access=read-only units=seconds Displayed(tab/group)=Time To Next Query |
| operationalVersion |
The operational version of MLD which is running for this SAP.
type=int access=read-only default=3 Displayed(tab/group)=MLD Operational Version |
| portId |
The ID of the access port where this SAP is defined.
type=long access=read-create default=0 |
| queryInterval |
Specifies the frequency at which the MLD Host-Query packets are transmitted for this SAP.
Valid range for query interval is 0 or 2..1024.
type=int access=read-only default=0 minimum=0 maximum=1024 units=seconds Displayed(tab/group)=Query Interval |
| queryResponseIntvl |
Specifies maximum query response time advertised in MLDv2 queries for this SAP.
type=int access=read-only default=0 minimum=0 maximum=1023 units=seconds Displayed(tab/group)=Response Query Interval |
| routerId |
type=int access=read-create default=1 minimum=1 maximum=10240 Displayed(tab/group)=Routing Instance ID |
| sapPointer |
Reference to the access interface.
type=Pointer access=read-only default= Displayed(tab/group)=SAP |
| siteId |
type=string access=read-only default= Displayed(tab/group)=Site ID |
| Properties inherited from ManagedObject |
|---|
| actionMask, children-Set, deploymentState, isFaultSquelched, name, objectFullName, selfAlarmed |
| Supported Network Elements | |
|---|---|
| 7750 SR | Supported from 12.0.R1 |
| 7450 ESS |
Supported from 12.0.R1
|
| 7250 IXR | Supported from 19.10.R1 |
| Product Specifics | |
| 7250 IXR 20.0 | |
| 7250 IXR 21.0 | |
| 7250 IXR 22.0 | |
| 7250 IXR 23.0 | |
| 7250 IXR 24.0 | |
| 7250 IXR 25.0 | |
| 7450 ESS 20.0 | |
| 7450 ESS 21.0 | |
| 7450 ESS 22.0 | |
| 7450 ESS 23.0 | |
| 7450 ESS 24.0 | |
| 7450 ESS 25.0 | |
| 7750 SR 20.0 | |
| 7750 SR 21.0 | |
| 7750 SR 22.0 | |
| 7750 SR 23.0 | |
| 7750 SR 24.0 | |
| 7750 SR 25.0 | |