epipe
PwPortFpe

This class represents the PW Port configurations under an Epipe site. The internal PW is cross-connected via loopback (fpe) to the PW port.



public class PwPortFpe

Properties
administrativeState

type=netw.AdministrativeState
default=tmnxOutOfService
Displayed(tab/group)=Administration State (/Pw Port)
    •  epipe.Site  Administration State (PW Port FPE/PW Port)

creationOrigin

type=svt.L2RouteOriginType
access=read-create
default=manual

downOnPeerTldpPwStatusFaults Specifies whether the PW Port should go oper-down if any of the following PW status bits are received on the mate spoke-sdp: 0x00000001 - Pseudowire Not Forwarding 0x00000002 - Local Attachment Circuit (ingress) Receive Fault 0x00000004 - Local Attachment Circuit (egress) Transmit Fault 0x00000008 - Local PSN-facing PW (ingress) Receive Fault 0x00000010 - Local PSN-facing PW (egress) Transmit Fault

type=boolean
default=false
Displayed(tab/group)=Down On Peer TLDP PW Status Faults (/Pw Port)
    •  epipe.Site  Down On Peer TLDP PW Status Faults (PW Port FPE/PW Port)

egrShapIntDestId Specifies the default intermediate destination identifier on the egress side for this pseudo-wire port

type=string
default=
minimum=0
maximum=32
Displayed(tab/group)=Dest Id on Egress Side (/Pw Port)
    •  epipe.Site  Dest Id on Egress Side (PW Port FPE/PW Port)

fpePointer The pointer pointing to Forward Path Extension (FPE) instance which specifies FPE identifier associated with this service.

type=Pointer
access=read-create
default=
Mandatory on create
Displayed(tab/group)=Forward Path Extension (/Pw Port)
    •  epipe.Site  Forward Path Extension (PW Port FPE/PW Port)

monOperGrpPointer The pointer pointing to monitoring operational group.

type=Pointer
default=
Displayed(tab/group)=Monitor Group Name (/Pw Port)
    •  epipe.Site  Monitor Group Name (PW Port FPE/PW Port)

operUpOnMhStandby Specifies whether PW port will go operationally UP on standby.

type=boolean
default=false
Displayed(tab/group)=Operational Up On MH Standby (/Pw Port)
    •  epipe.Site  Operational Up On MH Standby (PW Port FPE/PW Port)

pwPortPointer The pointer pointing to pseudo-wire port.

type=Pointer
access=read-create
default=
Mandatory on create
Displayed(tab/group)=PW Port (/Pw Port)
    •  epipe.Site  PW Port (PW Port FPE/PW Port)

serviceId

type=long
access=read-only
default=1
minimum=1
maximum=2147483647
Displayed(tab/group)=Service Id (/Pw Port)

siteId

type=string
access=read-only
default=0.0.0.0
maximum=50

templateVersionPointer Pointer to the template if this object was created from a template.

type=Pointer
default=
Displayed(tab/group)=Associated Template (Template/Associated Template)

vPortPointer The pointer pointing to the virtual port of the shaper on the egress side for this pseudo-wire port entry

type=Pointer
default=
Displayed(tab/group)=Virtual Port (/Pw Port)
    •  epipe.Site  Virtual Port (PW Port FPE/PW Port)

  
Properties inherited from ManagedObject
actionMask, children-Set, deploymentState, isFaultSquelched, name, objectFullName, selfAlarmed
 
Supported Network Elements
7750 SR Supported from 14.0.R4
  • Excluded chassis types: 7750-SRc4, 7750-SRc12, VSR-I, VSR
7705 SAR Hm
7950 XRS Supported from 14.0.R4
7450 ESS Supported from 14.0.R4
  • Excluded chassis types: 7450-ESS6, 7450-ESS6V
Product Specifics
7450 ESS 20.0
7450 ESS 21.0
7705 SAR Hm 20.0
7705 SAR Hm 21.0
7750 SR 20.0
7750 SR 21.0
7950 XRS 20.0
7950 XRS 21.0