| Overview | Package | Class | Deprecated | Help |
| Properties | |
|---|---|
| creationOrigin |
type=svt.L2RouteOriginType access=read-create default=manual |
| localBitRate |
This object indicates the local bit-rate in multiples of
64 Kbit/s.
type=long access=read-only default=0 units=Kb/s Displayed(tab/group)=Local Bit Rate (CEM) |
| localCasTrunkFraming |
This object indicates the local CAS trunk framing mode.
type=cpipe.TdmOptionsCasTrunkFraming access=read-only default=noCas Displayed(tab/group)=Local CAS Trunk Framing (CEM) |
| localDifferential |
This object indicates whether differential timestamp
mode is used in the RTP header when packets are
transmitted to the remote peer, and the local peer expects
differential timestamps in the RTP header when packets are
received from the remote peer.
type=boolean access=read-only default=false Displayed(tab/group)=Local Differential (CEM) |
| localPayloadSize |
This object indicates the local payload size (in bytes).
type=long access=read-only default=0 units=Octets Displayed(tab/group)=Local Payload Size (CEM) |
| localSigPkts |
This object indicates the local CE application signalling
packets mode.
type=cpipe.TdmOptionsSigPkts access=read-only default=noSigPkts Displayed(tab/group)=Local Signalling Packets (CEM) |
| localTimestampFreq |
This object indicates the timestamp frequency used
in the RTP header when packets are transmitted to the
remote peer, and the local peer expects same timestamp
frequency in the RTP header when packets are received
from the remote peer.
type=long access=read-only default=0 units=KHz Displayed(tab/group)=Local Timestamp Frequency (CEM) |
| localUseRtpHeader |
This object indicates whether a RTP header is used
when packets are transmitted to the remote peer, and
the local peer expects a RTP header when packets are
received from the remote peer.
type=boolean access=read-only default=false Displayed(tab/group)=Local Use RTP Header (CEM) |
| peerBitRate |
This object indicates the remote bit-rate in multiples of
64 Kbit/s.
If there is no remote peer, or if the label mapping has
not been received, or if this value has not been received
from the remote peer then this object will be zero (0).
type=long access=read-only default=0 units=Kb/s Displayed(tab/group)=Peer Bit Rate (CEM) |
| peerCasTrunkFraming |
This object indicates whether a RTP header is used
when packets are transmitted to the remote peer, and
the local peer expects a RTP header when packets are
received from the remote peer.
type=cpipe.TdmOptionsCasTrunkFraming access=read-only default=noCas Displayed(tab/group)=Peer CAS Trunk Framing (CEM) |
| peerDifferential |
This object indicates whether differential timestamp mode
is used in the RTP header when packets are transmitted by
the remote peer, and the remote peer expects differential
timestamps in the RTP header when packets are received
from the local peer.
If there is no remote peer, or if the label mapping has
not been received, or if the remote peer does not support
differential timestamp mode then this object will be
'false'.
type=boolean access=read-only default=false Displayed(tab/group)=Peer Differential (CEM) |
| peerPayloadSize |
This object indicates the remote payload size (in bytes).
If there is no remote peer, or if the label mapping has
not been received, or if this value has not been received
from the remote peer then this object will be zero (0).
type=long access=read-only default=0 units=Octets Displayed(tab/group)=Peer Payload Size (CEM) |
| peerSigPkts |
This object indicates the remote CE application signalling
packets mode.
If there is no remote peer, or if the label mapping has
not been received, or if the remote peer does not support
signalling packets then this object will be zero (0).
type=cpipe.TdmOptionsSigPkts access=read-only default=noSigPkts Displayed(tab/group)=Peer Signalling Packets (CEM) |
| peerTimestampFreq |
This object indicates the timestamp frequency used in
the RTP header when packets are transmitted by the remote
peer, and the remote peer expects the same timestamp
frequency in the RTP header when packets are received
from the local peer.
If there is no remote peer, or if the label mapping has
not been received, or if the remote peer does not support
support RTP headers then this object will be zero (0).
This value is in multiples of 8 KHz.
type=long access=read-only default=0 units=KHz Displayed(tab/group)=Peer Timestamp Frequency (CEM) |
| peerUseRtpHeader |
This object indicates whether a RTP header is used
when packets are transmitted by the remote peer, and
the remote peer expects a RTP header when packets are
received from the local peer.
If there is no remote peer, or if the label mapping has
not been received, or if the remote peer does not support
RTP headers then this object will be 'false'.
type=boolean access=read-only default=false Displayed(tab/group)=Peer Use RTP Header (CEM) |
| sdpBindCpipeLocalActMultiPath |
The value of the object aeSdpBindCpipeLocalJitterBuffer indicates the
local jitter buffer size in milliseconds (ms).
type=svt.SdpBindCpipePeerActMultipathType access=read-only default=disabled Displayed(tab/group)=Local ActMultiPath (CEM/Asymmetric Delay) |
| sdpBindCpipeLocalAsymDelay |
The value of the object aeSdpBindCpipeLocalAsymDelay indicates
whether Asymmetic Delay Control (ADC) is enabled locally. This value
is transmitted to the remote peer.
type=svt.SdpBindCpipeLocalAsymDelayType access=read-only default=disabled Displayed(tab/group)=Local Delay (CEM/Asymmetric Delay) |
| sdpBindCpipeLocalJitterBuffer |
The value of the object aeSdpBindCpipeLocalJitterBuffer indicates the
local jitter buffer size in milliseconds (ms).
type=long access=read-only default=0 units=milliseconds Displayed(tab/group)=Local Jitter Buffer (CEM/Asymmetric Delay) |
| sdpBindCpipeLocalSerialRate |
The value of the object aeSdpBindCpipeLocalSerialRate indicates the
local Serial bit-rate of the 'satopSerial' cpipe SDP Bind in bits/s.
type=long access=read-only default=0 units=bits/s Displayed(tab/group)=Local Serial Rate (CEM) |
| sdpBindCpipePeerActMultiPath |
The value of the object aeSdpBindCpipeLocalJitterBuffer indicates the
remote jitter buffer size in milliseconds (ms).
If there is no remote peer, or if the label mapping has not been
received, or if this value has not been received from the remote peer
then this object will be zero (0).
type=svt.SdpBindCpipePeerActMultipathType access=read-only default=disabled Displayed(tab/group)=Peer ActMultiPath (CEM/Asymmetric Delay) |
| sdpBindCpipePeerAsymDelay |
The value of the object aeSdpBindCpipePeerAsymDelay indicates
whether Asymmetic Delay Control (ADC) is enabled remotely. This value
is received from the remote peer.
If there is no remote peer, or if the label mapping has not been
received, or if this value has not been received from the remote peer
then this object will be 'disabled'.
type=svt.SdpBindCpipePeerAsymDelayType access=read-only default=disabled Displayed(tab/group)=Peer Delay (CEM/Asymmetric Delay) |
| sdpBindCpipePeerJitterBuffer |
The value of the object aeSdpBindCpipeLocalJitterBuffer indicates the
remote jitter buffer size in milliseconds (ms).
If there is no remote peer, or if the label mapping has not been
received, or if this value has not been received from the remote peer
then this object will be zero (0).
type=long access=read-only default=0 units=milliseconds Displayed(tab/group)=Peer Jitter Buffer (CEM/Asymmetric Delay) |
| sdpBindCpipePeerSerialRate |
The value of the object aeSdpBindCpipePeerSerialRate indicates the
remote Serial bit-rate of the 'satopSerial' cpipe SDP Bind in bits/s.
If there is no remote peer, or if the label mapping has not been
received, or if this value has not been received from the remote peer
then this object will be zero (0).
type=long access=read-only default=0 units=bits/s Displayed(tab/group)=Peer Serial Rate (CEM) |
| Properties inherited from svt.SdpBindingCfg |
|---|
| nodeId, pathId, serviceId, vcId |
| Properties inherited from ManagedObject |
|---|
| actionMask, children-Set, deploymentState, isFaultSquelched, name, objectFullName, selfAlarmed |
| Supported Network Elements | |
|---|---|
| 7750 SR | |
| 7705 SAR Gen 2 | |
| 7705 SAR Hm | |
| 7705 SAR | |
| 7705 SAR H | |
| 7450 ESS | |
| 7210 SAS M |
Supported for all versions
|
| 7210 SAS T |
Supported for all versions
|
| 7210 SAS K |
Supported for all versions
|
| 7210 SAS Mxp |
Supported for all versions
|
| 7210 SAS S/Sx | |
| 7250 IXR |
Supported for all versions
|
| DC VSC | |
| DC 7850 | |
| DC 210 | |
| DC VSA8 | |
| 7950 XRS | |
| Product Specifics | |
| 7705 SAR H 20.0 | |
| 7705 SAR H 21.0 | |
| 7705 SAR H 22.0 | |
| 7705 SAR H 23.0 | |
| 7705 SAR H 24.0 | |
| 7705 SAR H 25.0 | |
| 7705 SAR H 9.0 | |
| 7705 SAR 20.0 | |
| 7705 SAR 21.0 | |
| 7705 SAR 22.0 | |
| 7705 SAR 23.0 | |
| 7705 SAR 24.0 | |
| 7705 SAR 25.0 | |