| Overview | Package | Class | Deprecated | Help |
| Properties | |
|---|---|
| callingStationId |
type=string default= minimum=0 maximum=64 Displayed(tab/group)=Calling Station ID |
| clear.ClearRequest-Set |
type=Children-Set |
| creationOrigin |
type=svt.L2RouteOriginType access=read-create default=manual |
| egressDestMacRewriteIeeeAddress |
This parameter specifies whether the Destination MAC address should be rewritten and to what value it should be rewritten.
type=MacAddress default=00-00-00-00-00-00 Displayed(tab/group)=IEEE Address (QoS/Egress Destination MAC Overwrite) |
| ethernetoam.AbstractAccessInterfaceMip-Set |
type=Children-Set |
| forceCtagVlanFwd |
type=boolean default=false Displayed(tab/group)=Force ctag Vlan Forwarding (/Force ctag VLAN Forwarding) |
| forceL2Pt |
type=generic.TruthValue default=false Displayed(tab/group)=Force L2PT On Managed L2 Access Interface (Forwarding Control.BPDU Termination) |
| hostLockoutPolicyName |
Name of the host lockout Policy profile.
type=string access=read-only |
| hostLockoutPolicyPointer |
Pointer to the host lockout Policy
type=Pointer default= Displayed(tab/group)=Policy (/Host Lockout) |
| instLastErr |
Indicates last error encountered while instantiating SAPs controlled by this SAP.
type=string access=read-only default= Displayed(tab/group)=Last Error (/Instantiating SAP Status) |
| instStatus |
Indicates the status of the SAP which is instantiating other SAPs controlled by this SAP.
type=mvpls.SapInstStatus access=read-only default=notApplicable Displayed(tab/group)=SAP Status (/Instantiating SAP Status) |
| l2fwd.RedundantVlanRange-Set |
type=Children-Set |
| l2ptForceProtocols |
The value of the object sapTlsL2ptForceProtocols specifies
which L2 Protocol Tunnel pdu's must be terminated by
SAP's managed by this SAP.
This object is only relevant if the value of the object
sapTlsL2ptForceBoundary is 'true'.
For every SAP managed by this SAP, each L2 protocol
specified by sapTlsL2ptForceProtocols must be terminated,
while other L2 protocols may or may not be terminated,
depending on the value of sapTlsL2ptProtocols of that
managed SAP."
type=vpls.L2PtProtocol default=stp Displayed(tab/group)=L2PT Protocol (Forwarding Control.BPDU Termination/L2PTForce Protocol) |
| lmmCollectStats |
Specifies whether or not to compute the Y.1731 ETH-LM 'RxFCl' and 'TxFCl' service frame
counters for the specified SAP.The 'RxFCl' and 'TxFCl' counters are used by ETH-LM loss
measurement tests.
type=boolean default=false Displayed(tab/group)=Enable LMM Session Stats Collection (OAM.ETH-CFM/LMM Session Stats Collection) |
| lmmFcCollection |
Specifies which forwarding class levels (in and out of profile combined)
have enabled the computation for Y.1731 Ethernet Loss Measurement (ETH-LM)
RxFCl andTxFCl service frame counters for the specified SAP.
If the bit corresponding to a forwarding class level is set, then
a unique counter will be used to track all the combined in and out of
profile traffic associated with that forwarding class.
type=nat.FcBitMask default=0 Displayed(tab/group)=Collect ETH-LMM FC Stats (OAM.ETH-CFM/LMM Session Stats Collection) |
| lmmFcCollectionInProfile |
Specifies which forwarding class levels (in profile only)
have enabled the computation for Y.1731 Ethernet Loss Measurement (ETH-LM)
RxFCl andTxFCl service frame counters for the specified SAP.
If the bit corresponding to a forwarding class level is set, then
a unique counter will be used to track all the combined in and out of
profile traffic associated with that forwarding class.
type=nat.FcBitMask default=0 Displayed(tab/group)=Collect ETH-LMM FC Stats in Profile (OAM.ETH-CFM/LMM Session Stats Collection) |
| mvpls.SapIgmpHostTracking-Set |
type=Children-Set |
| ressubscr.HostLockoutInfo-Set |
type=Children-Set |
| ressubscr.HostTrackingInfoPerSap-Set |
type=Children-Set |
| squelchIngressCtagLevel |
Specifies the ETH-CFM level or levels of the ETH-CFM PDUs that are silently discarded
using additional VLAN space immediately following ingress service delineation.
type=ethernetoam.SquelchIngressCtagLevelType default=none Displayed(tab/group)=Squelch Ingress Ctag Level (OAM.ETH-CFM/Squelch Ingress Level) |
| squelchIngressLevel |
Specifies the ETH-CFM level or levels that are silently discarded on ingress to the SAP.
Any received ETH-CFM PDU matching a level that has been set will be dropped without regard
for any other ETH-CFM criteria.
type=ethernetoam.SquelchIngressLevelType default=none Displayed(tab/group)=Squelch Ingress Level (OAM.ETH-CFM/Squelch Ingress Level) |
| vMepFilter |
The value of vMepFilter specifies whether ETH-CFM PDUs egressing the sap at the same level or
lower than that of the configured service MEP (the virtual MEP) should be discarded or continue
to egress.
type=boolean default=false Displayed(tab/group)=Enable Virtual MEP Filter (OAM.ETH-CFM/Virtual MEPs) |
| Properties inherited from netw.PortClientInterface |
|---|
| terminationParticipationType |
| Properties inherited from netw.PortTerminatingInterface |
|---|
| innerEncapValue, outerEncapValue, portIdentifyingName, portPointer |
| Properties inherited from netw.StatefullConnectableInterface |
|---|
| administrativeState, compositeState, encapType, operationalState, resourceState, underlyingResourceState |
| Properties inherited from netw.LogicalInterface |
|---|
| application, description, displayedName, domain, nodeId, nodeName |
| Properties inherited from ManagedObject |
|---|
| actionMask, children-Set, deploymentState, isFaultSquelched, name, objectFullName, selfAlarmed |
| Methods |
|---|
deployer
: Deployer - the deployment state
synchronousDeploy
: boolean - (Optional) Specify whether to block until the changes have been fully deployed to the network. A value of "true" means to block. A value of "false" means to return immediately. Default: false (asynchronous)
clearOnDeployFailure
: boolean - (Optional) Specify whether to clear any failed deployers. A value of "true" means to clear. A value of "false" means to leave the failed deployer. Default: false
deployRetries
: int - (Optional) The number of times to attempt re-deployment during synchronous deployment. This parameter is meaningless in the asynchronous case. Default: 0
deployRetryInterval
: long - (Optional) The number of milliseconds to wait between deployment retries. This parameter is meaningless in the asynchronous case. Default: 0
taskDescription
: string - (Optional) A user friendly description of what the operation does. This information will be used by the task manager.
instanceFullName
: string - the full name of the object.
aInOnlyStats
: boolean - Whether to clear the IGMP Host Tracking statistics
only (host tracking info is not cleared).
resultFilter
: ResultFilter - (Optional) Filter for narrowing down the information returned per object
continueOnFailure
: continueOnFailure - (Optional) Continue processing requests in this stream if an exception occurs, unless the request is invalid. Default: false
aOutResult
: clear.RequestHandleStruct - A request handle which allows the retrieval of the
request (and its result when it becomes available)
through the ClearCommandManager's retrieveClearRequest
method.
| Methods inherited from service.L2AccessInterface |
|---|
| cleanupSAPsWithBadFdns, copyMoveSaps, copyMoveSapsWithSapList, findMcRingProtectedSaps, findMcRingProtectedSapsOnRing |
| Methods inherited from service.AccessInterface |
|---|
| findSitesFor, moveSapToAnotherService |