| Overview | Package | Class | Deprecated | Help |
| Properties | |
|---|---|
| creationOrigin |
type=svt.L2RouteOriginType access=read-create default=manual |
| disRtrAlertChk |
It is used to enable/disable router alert checking for IGMP messages received on this interface.
If this flag is set to 'true', checking is disabled.
type=boolean default=false Displayed(tab/group)=Disable Router Alert Check |
| encapVal |
The value of the label used to identify this
SAP on the access port specified by sapPortId.
type=long access=read-only default=0 minimum=0 maximum=4294967295 |
| fastLeave |
Whether fast leave is allowed on this SAP.
If set to 'inService(2)', the system prunes the port on which an MLD
'leave' message has been received, without waiting for the Group
Specific Query to timeout.
type=vpls.MldSnoopingAdminState default=disabled Displayed(tab/group)=Fast-Leave |
| genQueryInterval |
Interval (in seconds) between two consecutive general queries
sent by the system on this SAP.
The value of this object is only meaningful when the value of
sendQueries is 'inService(2)'.
type=int default=125 minimum=2 maximum=1024 units=seconds Displayed(tab/group)=General Query Interval (/Queries) |
| importPolicy |
policy statement that must be applied to all incoming MLD messages
on this SAP.
type=string default= maximum=32 Displayed(tab/group)=Import Policy |
| lastMemberInterval |
Max Response Time (in tenths of a second) used in
Group-Specific and Group-Source-Specific Queries sent in response
to 'leave' messages. This is also the amount of time between
Group-Specific Query messages.
This value may be tuned to modify the leave latency of the network.
A reduced value results in reduced time to detect the loss of the last
member of a group.
type=int default=10 minimum=1 maximum=50 units=tenths of seconds Displayed(tab/group)=Maximum Response Interval Group Queries (/Groups) |
| maxNbrGroups |
Number of group addresses are allowed for this SAP.
The value 0 means that no limit is imposed.
type=int default=0 minimum=0 maximum=16000 Displayed(tab/group)=Maximum Number of Groups (/Groups) |
| mldVersion |
Version of MLD running on this SAP.
type=vpls.MldVersionType default=2 minimum=1 maximum=2 Displayed(tab/group)=MLD Version (/Queries) |
| mrouterAttached |
Whether a multicast router is attached behind this SAP.
If sendQueries is set to 'inService(2)', the system acts
as if this object was set to 'false(2)'.
type=boolean default=false Displayed(tab/group)=Multicast Router Attached (/Multicast Router) |
| portId |
ID of the access port where this SAP is defined.
type=long access=read-only default=0 |
| queryResponseInterval |
Maximum response time (in seconds) advertised in MLD queries.
The value of this object is only meaningful when the value of
sendQueries is 'inService(2)'.
type=int default=10 minimum=1 maximum=1023 units=seconds Displayed(tab/group)=Maximum Response Interval (/Queries) |
| robustCount |
Robustness variable on this SAP.
This object allows tuning for the expected packet loss on this SAP.
If a SAP is expected to be lossy, the Robustness Variable may be
increased. MLD snooping is robust to (Robustness Variable-1) packet
losses.
The value of this object is only meaningful when the value of
sendQueries is 'inService(2)'."
type=int default=2 minimum=2 maximum=7 Displayed(tab/group)=Robust Count (/Queries) |
| sendQueries |
Whether the system generates General Queries by itself on this SAP.
type=vpls.MldSnoopingAdminState default=disabled Displayed(tab/group)=Send Queries (/Queries) |
| serviceId |
type=long access=read-only default=0 |
| vpls.L2AccessInterfaceMldSnpgStaticMcastGrp-Set |
type=Children-Set |
| Properties inherited from ManagedObject |
|---|
| actionMask, children-Set, deploymentState, isFaultSquelched, name, objectFullName, selfAlarmed |
| Supported Network Elements | |
|---|---|
| 7450 ESS | |
| 7750 SR | |
| 7705 SAR Gen 2 | |
| 7705 SAR Hm | |
| 7950 XRS | |
| 7705 SAR | Supported from 7.0.R1 |
| 7705 SAR H | Supported from 7.0.R1 |
| 7250 IXR | Supported from 19.7.R1 |
| Product Specifics | |
| 7705 SAR H 20.0 | |
| 7705 SAR H 21.0 | |
| 7705 SAR H 22.0 | |
| 7705 SAR H 23.0 | |
| 7705 SAR H 24.0 | |
| 7705 SAR H 25.0 | |
| 7705 SAR H 9.0 | |
| 7705 SAR 20.0 | |
| 7705 SAR 21.0 | |
| 7705 SAR 22.0 | |
| 7705 SAR 23.0 | |
| 7705 SAR 24.0 | |
| 7705 SAR 25.0 | |