| Overview | Package | Class | Deprecated | Help |
| Properties | |
|---|---|
| accessInterfacePortRole |
type=l2fwd.StpPortRole access=read-only default=unknown Displayed(tab/group)=Port Role (/Properties) |
| actualBpduEncap |
type=l2fwd.StpBduEncap access=read-only default=unspecified Displayed(tab/group)=Actual BPDU Encapsulation Type (/Properties) |
| administrativeState |
type=l2fwd.StpState default=up Displayed(tab/group)=Administrative State (/States) |
| autoEdge |
type=l2fwd.StpAutoEdgeState default=enabled Displayed(tab/group)=Edge Capability Detection (/Properties) |
| bpduEncap |
type=l2fwd.StpBduEncap access=read-only default=dynamic Displayed(tab/group)=BPDU Encapsulation Type (/Properties) |
| bridgePriority |
type=int access=read-only default=0 minimum=0 maximum=65535 Displayed(tab/group)=Bridge Priority (/Properties) |
| designatedBridge |
type=MacAddress access=read-only default=00-00-00-00-00-00 Displayed(tab/group)=Designated Bridge (/Properties) |
| designatedPort |
type=int access=read-only default=0 Displayed(tab/group)=Designated Port (/Properties) |
| exceptionCondition |
The value of the property exceptionCondition indicates
whether an STP exception condition is present on this Access Interface.
Possible values:
- none : no exception condition found.
- oneWayCommunication : The neighbor RSTP peer on this link is not able to detect our presence.
- downstreamLoopDetected : A loop is detected on this link.
type=l2fwd.StpExceptionConditionState access=read-only default=none Displayed(tab/group)=STP Exception Condition (/States) |
| l2fwd.AccessInterfaceMstInstance-Set |
type=Children-Set |
| linkType |
type=l2fwd.StpLinkState default=true Displayed(tab/group)=Link Type (/Properties) |
| operationalEdgePort |
type=generic.TruthValue access=read-only default=false Displayed(tab/group)=Operational Edge (/Properties) |
| operationalStpProtocol |
type=l2fwd.StpProtocol access=read-only default=notApplicable Displayed(tab/group)=STP Protocol (/Properties) |
| pathCost |
type=long default=10 minimum=1 maximum=200000000 Displayed(tab/group)=Path Cost (/Properties) |
| portNum |
type=int default=0 minimum=0 maximum=2047 Displayed(tab/group)=Port Number (/Properties) |
| portState |
type=l2fwd.StpPortState access=read-only default=unknown Displayed(tab/group)=Port State (/States) |
| priority |
type=int default=128 minimum=0 maximum=255 Displayed(tab/group)=Priority (/Properties) |
| rapidStart |
This property is either referred to as rapidStart or edgePort
type=l2fwd.StpRapidStartState default=disabled Displayed(tab/group)=Edge Port (/Properties) |
| rootGuard |
The value of the property rootGuard specifies
whether this port is allowed to become STP root port.
It corresponds to the parameter restrictedRole in 802.1Q.
If set, it can cause lack of spanning tree connectivity.
type=boolean default=false Displayed(tab/group)=Root Guard (/Properties) |
| rootGuardViolation |
The value of the object sapTlsStpRootGuardViolation
indicates whether there is a root-guard violation at the
present time. This can only happen when rootGuard
is set to true.
type=boolean access=read-only default=false Displayed(tab/group)=Root Guard Violation (/Properties) |
| Properties inherited from l2fwd.ServiceInterface |
|---|
| combinedEncapValue, innerEncapValue, outerEncapValue, portId, portName, portPointer |
| Properties inherited from l2fwd.ServiceSite |
|---|
| serviceId, subscriberId, svcComponentId |
| Properties inherited from fwd.Site |
|---|
| siteId, siteName |
| Properties inherited from ManagedObject |
|---|
| actionMask, children-Set, deploymentState, isFaultSquelched, name, objectFullName, selfAlarmed |
| Supported Network Elements | |
|---|---|
| 7450 ESS | |
| 7210 SAS M | |
| 7210 SAS X | |
| 7210 SAS E | |
| 7210 SAS D | |
| 7210 SAS K | Supported from 8.0.R1 |
| 7210 SAS T | |
| 7210 SAS Mxp | |
| 7210 SAS Dxp | |
| 7210 SAS S/Sx | |
| 7210 SAS R | |
| 7250 IXR | |
| 7750 SR | |
| 7705 SAR Gen 2 | |
| 7705 SAR Hm | |
| 7705 SAR H | |
| 7705 SAR | Supported from 4.0.R4 |
| 7950 XRS | |