| Overview | Package | Class | Deprecated | Help |
| Properties | |
|---|---|
| creationOrigin |
type=svt.L2RouteOriginType access=read-create default=manual |
| ethernetoam.AbstractAccessInterfaceMip-Set |
type=Children-Set |
| forceL2Pt |
type=generic.TruthValue default=false Displayed(tab/group)=Force L2PT On Managed L2 Access Interface (Forwarding Control.BPDU Termination) |
| instLastErr |
Indicates last error encountered while instantiating SAPs controlled by this SAP.
type=string access=read-only default= Displayed(tab/group)=Last Error (/Instantiating SAP Status) |
| instStatus |
Indicates the status of the SAP which is instantiating other SAPs controlled by this SAP.
type=mvpls.SapInstStatus access=read-only default=notApplicable Displayed(tab/group)=SAP Status (/Instantiating SAP Status) |
| l2fwd.AccessInterfaceFib-Set |
type=Children-Set |
| l2fwd.L2AccessInterfaceMrpInfo-Set |
type=Children-Set |
| l2fwd.RedundantVlanRange-Set |
type=Children-Set |
| l2ptForceProtocols |
The value of the object sapTlsL2ptForceProtocols specifies
which L2 Protocol Tunnel pdu's must be terminated by
SAP's managed by this SAP.
This object is only relevant if the value of the object
sapTlsL2ptForceBoundary is 'true'.
For every SAP managed by this SAP, each L2 protocol
specified by sapTlsL2ptForceProtocols must be terminated,
while other L2 protocols may or may not be terminated,
depending on the value of sapTlsL2ptProtocols of that
managed SAP."
type=vpls.L2PtProtocol default=stp Displayed(tab/group)=L2PT Protocol (Forwarding Control.BPDU Termination/L2PTForce Protocol) |
| lmmCollectStats |
Specifies whether or not to compute the Y.1731 ETH-LM 'RxFCl' and 'TxFCl' service frame
counters for the specified SAP.The 'RxFCl' and 'TxFCl' counters are used by ETH-LM loss
measurement tests.
type=boolean default=false Displayed(tab/group)=Enable LMM Session Stats Collection (OAM.ETH-CFM/LMM Session Stats Collection) |
| lmmFcCollection |
Specifies which forwarding class levels (in and out of profile combined)
have enabled the computation for Y.1731 Ethernet Loss Measurement (ETH-LM)
RxFCl andTxFCl service frame counters for the specified SAP.
If the bit corresponding to a forwarding class level is set, then
a unique counter will be used to track all the combined in and out of
profile traffic associated with that forwarding class.
type=nat.FcBitMask default=0 Displayed(tab/group)=Collect ETH-LMM FC Stats (OAM.ETH-CFM/LMM Session Stats Collection) |
| lmmFcCollectionInProfile |
Specifies which forwarding class levels (in profile only)
have enabled the computation for Y.1731 Ethernet Loss Measurement (ETH-LM)
RxFCl andTxFCl service frame counters for the specified SAP.
If the bit corresponding to a forwarding class level is set, then
a unique counter will be used to track all the combined in and out of
profile traffic associated with that forwarding class.
type=nat.FcBitMask default=0 Displayed(tab/group)=Collect ETH-LMM FC Stats in Profile (OAM.ETH-CFM/LMM Session Stats Collection) |
| memberOperGroupName |
The member group name that this sap is assigned to.
type=string default= |
| memberOperGroupPtr |
The pointer to the operational group as a member. Used for UI display. For OSSI setting, use:
mvpls.BL2AccessInterface.memberOperGroupName instead.
type=Pointer default= Displayed(tab/group)=Member Group Name (/Operational Group) |
| monitorOperGroupName |
The monitor group name that this sap is assigned to.
type=string default= |
| monitorOperGroupPtr |
The pointer to the operational group, which is monitored by this object. Used for UI display.
For OSSI setting, use: mvpls.BL2AccessInterface.monitorOperGroupName instead.
type=Pointer default= Displayed(tab/group)=Monitored Group Name (/Operational Group) |
| service.EncapGroup-Set |
type=Children-Set |
| service.OperGrpBindingMember-Set |
type=Children-Set |
| service.OperGrpBindingMonitor-Set |
type=Children-Set |
| squelchIngressCtagLevel |
Specifies the ETH-CFM level or levels of the ETH-CFM PDUs that are silently discarded
using additional VLAN space immediately following ingress service delineation.
type=ethernetoam.SquelchIngressCtagLevelType default=none Displayed(tab/group)=Squelch Ingress Ctag Level (OAM.ETH-CFM/Squelch Ingress Level) |
| squelchIngressLevel |
Specifies the ETH-CFM level or levels that are silently discarded on ingress to the SAP.
Any received ETH-CFM PDU matching a level that has been set will be dropped without regard
for any other ETH-CFM criteria.
type=ethernetoam.SquelchIngressLevelType default=none Displayed(tab/group)=Squelch Ingress Level (OAM.ETH-CFM/Squelch Ingress Level) |
| Properties inherited from vpls.AbstractPbbSap |
|---|
| antispoof.L2AntiSpoofing-Set |
| Properties inherited from netw.PortClientInterface |
|---|
| terminationParticipationType |
| Properties inherited from netw.PortTerminatingInterface |
|---|
| innerEncapValue, outerEncapValue, portIdentifyingName, portPointer |
| Properties inherited from netw.StatefullConnectableInterface |
|---|
| administrativeState, compositeState, encapType, operationalState, resourceState, underlyingResourceState |
| Properties inherited from netw.LogicalInterface |
|---|
| application, description, displayedName, domain, nodeId, nodeName |
| Properties inherited from ManagedObject |
|---|
| actionMask, children-Set, deploymentState, isFaultSquelched, name, objectFullName, selfAlarmed |
| Methods inherited from service.L2AccessInterface |
|---|
| cleanupSAPsWithBadFdns, copyMoveSaps, copyMoveSapsWithSapList, findMcRingProtectedSaps, findMcRingProtectedSapsOnRing |
| Methods inherited from service.AccessInterface |
|---|
| findSitesFor, moveSapToAnotherService |
| Supported Network Elements | |
|---|---|
| 7450 ESS | Supported from 6.0.R3 |
| 7750 SR | Supported from 6.0.R3 |
| 7705 SAR Hm | |
| 7210 SAS M | Supported from 4.0.R1 |
| 7210 SAS X | Supported from 4.0.R1 |
| 7210 SAS T | |
| DC VSC | |
| DC 7850 | |
| DC 210 | |
| DC VSA8 | |
| 7950 XRS | |
| Product Specifics | |
| 7210 SAS M 20.0 | |
| 7210 SAS M 21.0 | |
| 7210 SAS T 20.0 | |
| 7210 SAS T 21.0 | |
| 7210 SAS T 22.0 | |
| 7210 SAS T 23.0 | |
| 7210 SAS T 24.0 | |
| 7210 SAS T 25.0 | |
| 7450 ESS 20.0 | |
| 7450 ESS 21.0 | |
| 7450 ESS 22.0 | |
| 7450 ESS 23.0 | |
| 7450 ESS 24.0 | |
| 7450 ESS 25.0 | |
| 7705 SAR Hm 20.0 | |
| 7705 SAR Hm 21.0 | |
| 7705 SAR Hm 22.0 | |
| 7705 SAR Hm 23.0 | |
| 7705 SAR Hm 24.0 | |
| 7705 SAR Hm 25.0 | |
| 7750 SR 20.0 | |
| 7750 SR 21.0 | |
| 7750 SR 22.0 | |
| 7750 SR 23.0 | |
| 7750 SR 24.0 | |
| 7750 SR 25.0 | |
| 7950 XRS 20.0 | |
| 7950 XRS 21.0 | |
| 7950 XRS 22.0 | |
| 7950 XRS 23.0 | |
| 7950 XRS 24.0 | |
| 7950 XRS 25.0 | |
| DC 210 (all versions) | |
| DC 7850 (all versions) | |
| DC VSA8 (all versions) | |
| DC VSC (all versions) | |