| Overview | Package | Class | Deprecated | Help |
| Properties | |
|---|---|
| agingEnabled |
type=generic.TruthValue default=true Displayed(tab/group)=Aging Enabled (/Properties) |
| autoLearnMacProtect |
Specifies whether to enable automatic population of the MAC protect list with source MAC addresses learned on the associated SAP
type=generic.TruthValue default=false Displayed(tab/group)=Auto Learn MAC Protect (/Properties) |
| autoLearnMacProtectExcludeList |
Specifies mac-list name which contains MAC addresses to be excluded from auto learn mac
protect. The value here corresponds to the svr.ServiceMacList object.
This property is valid only if l2fwd.AccessInterfaceFib.autoLearnMacProtect is true.
When l2fwd.AccessInterfaceFib.autoLearnMacProtect is set to false,
this property will be reset to default value.
type=string default= minimum=0 maximum=32 Displayed(tab/group)=Exclude MAC List (/Properties) |
| autoLearnMacProtectOper |
Indicates whether automatic population of the MAC protect list is enabled with source MAC
addresses learned on the associated SAP.
type=generic.TruthValue access=read-only default=false Displayed(tab/group)=Operational Auto Learn MAC Protect (/Properties) |
| bgpVplsMultiHomingVirtualEdgeId |
Specifies BGP-VPLS multi-homing virtual edge identifier range.
The valid range is [-1|1..65535].
type=int default=-1 minimum=-1 maximum=65535 Displayed(tab/group)=BGP VPLS Multi-homing Virtual Edge ID (/Properties) |
| creationOrigin |
type=svt.L2RouteOriginType access=read-create default=manual |
| discardUnknownSource |
type=generic.TruthValue default=false Displayed(tab/group)=Discard Unknown Source (/Properties) |
| entries |
type=long access=read-only default=0 Displayed(tab/group)=Entries (/Properties) |
| learningEnabled |
type=generic.TruthValue default=true Displayed(tab/group)=Learning Enabled (/Properties) |
| limitMacMove |
type=l2fwd.LimitMacMove default=blockable Displayed(tab/group)=Limit MAC Move (/Properties) |
| limitMacMoveLevel |
The value specifies the hierarchy in which SAPs are blocked when a MAC-move limit is exceeded. When a MAC is
moving among multiple SAPs or spoke-SDPs, the SAP bind or spoke-SDP bind with the lower level is blocked first.
(tertiary is the lowest)
type=l2fwd.MacMoveLevel default=tertiary Displayed(tab/group)=Limit MAC Move Level (/Properties) |
| macMoveMacAddress |
type=MacAddress access=read-only default=00-00-00-00-00-00 Displayed(tab/group)=MAC Address (/Properties) |
| macMoveNextUpTime |
Time in seconds until a SAP that has been brought down
due to exceeding the macMoveFrequency on the service site,
sapOperFlags 'relearnLimitExceeded', is automatically
brought up again.
When this value is 0xffff, the SAP will never be
automatically brought up. When the value is zero the SAP
is 'up'.
type=long access=read-only default=0 units=seconds Displayed(tab/group)=MAC Move Time before Next Auto Up (/Properties) |
| macMoveRateExcdLeft |
type=int access=read-only default=0 Displayed(tab/group)=MAC Move Left after Max. Rate Exceeded (/Properties) |
| maxEntries |
type=long default=0 minimum=0 maximum=131071 Displayed(tab/group)=Maximum Entries (/Properties) |
| restrictProtectedSource |
type=generic.TruthValue default=false Displayed(tab/group)=Restrict Protected Source (/Properties) |
| restrictProtectedSourceAction |
type=service.RestrictProtectedSourceAction default=disable Displayed(tab/group)=Restrict Protected Source Action (/Properties) |
| restrictProtectedSourceActionOper |
Indicates the operation state of the Restrict Protected Source MAC action.
type=service.RestrictProtectedSourceAction access=read-only default=disable Displayed(tab/group)=Operational Restrict Protected Source Action (/Properties) |
| restrictProtectedSourceOper |
Indicates the operational state of the Restrict Protected Source MAC feature.
type=generic.TruthValue access=read-only default=false Displayed(tab/group)=Operational Restrict Protected Source (/Properties) |
| restrictUnprotectedDestination |
type=generic.TruthValue default=false Displayed(tab/group)=Restrict Unprotected Destination (/Properties) |
| restrictUnprotectedDestinationOper |
Indicates how the system will forward packets destined to an unprotected MAC address.
When the value of this object is 'true' packets destined to an unprotected MAC address are dropped.
type=generic.TruthValue access=read-only default=false Displayed(tab/group)=Operational Restrict Unprotected Destination (/Properties) |
| sapDisableSendBvplsEvpnFlush |
Specifies whether to send an ISID based CMAC flush indication when the sap goes oper-down.
type=boolean default=false Displayed(tab/group)=Disable Send Flush on B-VPLS EVPN (/Properties) |
| staticEntries |
type=long access=read-only default=0 Displayed(tab/group)=Static Entries (/Properties) |
| Properties inherited from l2fwd.ServiceInterface |
|---|
| combinedEncapValue, innerEncapValue, outerEncapValue, portId, portName, portPointer |
| Properties inherited from l2fwd.ServiceSite |
|---|
| serviceId, subscriberId, svcComponentId |
| Properties inherited from fwd.Site |
|---|
| siteId, siteName |
| Properties inherited from ManagedObject |
|---|
| actionMask, children-Set, deploymentState, isFaultSquelched, name, objectFullName, selfAlarmed |