| Overview | Package | Class | Deprecated | Help |
| Properties | |
|---|---|
| bandwidth |
Specifies the administrative access bandwidth assigned to this SAP.
type=long default=0 minimum=0 maximum=6400000000 units=kbps Displayed(tab/group)=Bandwidth (Port) |
| bandwidthHi |
Specifies the administrative access bandwidth assigned to this SAP.
type=long default=0 units=kbps |
| bpduTransOper |
The value of the object sapTlsBpduTransOper indicates
the operational bpdu encapsulation used for BPDU
translated frames..
type=int access=read-only |
| bpduTranslation |
The value specifies whether received L2 Protocol Tunnel PDUs are
translated before being sent out on this L2 Access Interface.
type=vpls.BpduTranslation default=disabled Displayed(tab/group)=BPDU Translation (Forwarding Control.BPDU Termination) |
| ethTunnelControlSap |
For SAPs that have an Ethernet Tunnel Endpoint as the Terminating Port,
indicates if this is a control SAP.
If set to 'true', the value of the 'outerEncapValue' property is set to 8191.
type=boolean access=read-create default=false Displayed(tab/group)=Ethernet Tunnel Endpoint Control SAP (Port/Ethernet Tunnel) |
| ethernetoam.SapMipEntry-Set |
type=Children-Set |
| ethernettunnel.EthTunnelSapPath-Set |
type=Children-Set |
| l2fwd.AccessInterfaceStp-Set |
type=Children-Set |
| l2ptProtocol |
The L2ptProtocols indicates which L2 protocols should
have their tunnels terminated when 'L2ptTermination' is enabled.
type=vpls.L2PtProtocol default=stp Displayed(tab/group)=L2PT Protocol (Forwarding Control.BPDU Termination/L2PT Protocol) |
| l2ptTermination |
The value specifies whether received L2 Protocol Tunnel
PDUs are terminated on this L2 Access Interface.
type=vpls.L2PtTermination default=disabled Displayed(tab/group)=L2 Protocol Termination (Forwarding Control.BPDU Termination) |
| lagLinkMapProfilePointer |
Pointer to the LAG Link Mapping Profile
type=Pointer default= Displayed(tab/group)=LAG Link Map Profile (Port) |
| mcLagPropHoldTimeRemain |
"The value of mcLagPropHoldTimeRemain indicates the remaining
time, in seconds, until MEPs on this SAP will react to a Multi-Chassis
LAG protocol or port change. The value zero (0) indicates there are no
pending events, or the SAP is not a MC-LAG SAP.
This object corresponds to the global configuration timer:
TIMETRA-IEEE8021-CFM-MIB::tmnxDot1agCfmMcLagPropHoldTime."
type=long access=read-only Displayed(tab/group)=MC-LAG Hold Time (OAM.ETH-CFM/Facility MEPs) |
| mipEnabled |
type=vpls.MipMode default=disabled Displayed(tab/group)=MIP (OAM.ETH-CFM/MIP Configuration) |
| mipMacAddress |
type=MacAddress default=00-00-00-00-00-00 Displayed(tab/group)=MIP MAC Address (OAM.ETH-CFM/MIP Configuration) |
| processCpmTrafficOnLagSapDown |
When enabled, a simple LAG SAP will not be removed from the forwarding
plane and flooded traffic (unknown unicast, broadcast and multicast)
will be dropped on egress rather than ingress.This allows control
traffic to be extracted on egress and where applicable processed by
the CPM.
The value of tmnxSapTlsExProcCpmTrfcSapDn will not prevent a VPLS
service from entering an Operational Down state if it is the last
active connection to enter a non-operational state. By default, without
this value, when a LAG enters a non-operational state it is removed
from the forwarding plane and traffic is dropped on ingress.
type=boolean default=false Displayed(tab/group)=Process CPM Traffic on LAG SAP Down (/SAP Down behavior) |
| ringNodeName |
Specifies the unique name of a multi-chassis ring access node.
type=string default= minimum=0 maximum=32 Displayed(tab/group)=MC Ring Node (/MC Redundancy) |
| service.AccessPolicyMeterOverride-Set |
type=Children-Set |
| service.EgressAccessPolicyQueueOverride-Set |
type=Children-Set |
| service.EgressSchedulerPolicyEntryOverride-Set |
type=Children-Set |
| service.HsmdaEgressAccessPolicyQueueOverride-Set |
type=Children-Set |
| service.IngressAccessPolicyQueueOverride-Set |
type=Children-Set |
| service.IngressSchedulerPolicyEntryOverride-Set |
type=Children-Set |
| service.SASAccessPolicyQueueOverride-Set |
type=Children-Set |
| service.SapEgrPolicerCtlOverride-Set |
type=Children-Set |
| service.SapEgrQosHsWrrGroupOverride-Set |
type=Children-Set |
| service.SapEgressPolicerOverride-Set |
type=Children-Set |
| service.SapIngPolicerCtlOverride-Set |
type=Children-Set |
| service.SapIngressPolicerOverride-Set |
type=Children-Set |
| service.SapLagPerLinkHash-Set |
type=Children-Set |
| testRole |
Specifies if Test Suite Generation should use this MEP as a Hub or Spoke (Hubs target Hubs and Spokes, Spoke can only target Hubs)
type=ethernetoam.MepRole default=hub Displayed(tab/group)=Role (OAM.Configuration/Test Generation Options) |
| testSource |
Specifies if Test Suite Generation should use this MEP as a CFM test source (Originating MEP in test)
type=boolean default=true Displayed(tab/group)=Use as Test Source (OAM.Configuration/Test Generation Options) |
| testTarget |
Specifies if Test Suite Generation should use this MEP as a CFM test target (Target Mac Address in test)
type=boolean default=true Displayed(tab/group)=Use as Test Target (OAM.Configuration/Test Generation Options) |
| tunnelFaultNotification |
The value of tunnelFaultNotification specifies whether the SAP
will 'accept' CFM fault notifications from a Tunnel MEP and process
the notifications (i.e. do fault handling and/or fault propagation), or
'ignore' the notification.
Both TIMETRA-SERV-MIB::svcEthCfmTunnelFaultNotification and this object
MUST be set to 'accept' for the SAP to process the notification.
The value 'notApplicable' is used by the system to represent a SAP
which supports ETH-CFM, but not this object.
type=service.TunnelFaultNotificationType default=accept Displayed(tab/group)=Tunnel Fault Notification (OAM.ETH-CFM/Facility MEPs) |
| usesMultipointShared |
type=generic.TruthValue default=false Displayed(tab/group)=Use Multipoint Shared Queue (QoS/Shared Queue) |
| Overridden Properties | |
|---|---|
| description |
maximum=160 |
| Properties inherited from netw.PortClientInterface |
|---|
| terminationParticipationType |
| Properties inherited from netw.PortTerminatingInterface |
|---|
| innerEncapValue, outerEncapValue, portIdentifyingName, portPointer |
| Properties inherited from netw.StatefullConnectableInterface |
|---|
| administrativeState, compositeState, encapType, operationalState, resourceState, underlyingResourceState |
| Properties inherited from netw.LogicalInterface |
|---|
| application, description, displayedName, domain, nodeId, nodeName |
| Properties inherited from ManagedObject |
|---|
| actionMask, children-Set, deploymentState, isFaultSquelched, name, objectFullName, selfAlarmed |
| Methods inherited from service.L2AccessInterface |
|---|
| cleanupSAPsWithBadFdns, copyMoveSaps, copyMoveSapsWithSapList, findMcRingProtectedSaps, findMcRingProtectedSapsOnRing |
| Methods inherited from service.AccessInterface |
|---|
| findSitesFor, moveSapToAnotherService |