| Overview | Package | Class | Deprecated | Help |
| Properties | |
|---|---|
| aengr.Dot1p-Set |
type=Children-Set |
| aengr.Dscp-Set |
type=Children-Set |
| aengr.DynamicPolicer-Set |
type=Children-Set |
| aengr.ForwardingClass-Set |
type=Children-Set |
| aengr.HsWrrGroup-Set |
type=Children-Set |
| aengr.HsmdaQueue-Set |
type=Children-Set |
| aengr.IpMatch-Set |
type=Children-Set |
| aengr.Ipv6Match-Set |
type=Children-Set |
| aengr.Policer-Set |
type=Children-Set |
| aengr.Precedence-Set |
type=Children-Set |
| aengr.Queue-Set |
type=Children-Set |
| aengr.SchedulerClassElevation-Set |
type=Children-Set |
| egrHsmdaWrrPlcy |
Specifies the Weighted Round Robin (WRR) policy to use on the HSMDA queue.
type=Pointer default= Displayed(tab/group)=WRR Policy (/Egress HSMDA) |
| egressPktoffset |
Specifies the per packet byte offset for queues within this policy with aluSapEgressQueuePktOffset being zero.
type=int default=127 minimum=-62 maximum=127 Displayed(tab/group)=Egress Packet Offset |
| ethernetCtag |
Specifies the tag from which the dot1p and DE (Drop-Eligible) values will be drawn to be used by all tSapEgressDot1pEntry objects related to this policy.
type=boolean default=false Displayed(tab/group)=Ethernet Ctag |
| hsAttachmentPolicy |
Specifies the HS attachment policy being applied to this policy.
type=Pointer default=HsAttachmentPolicy:hsAtt-default Displayed(tab/group)=HS Attachment Policy |
| hsmdaLowBurstMaxClass |
Specifies which class should use the low priority burst threshold.
All classes starting from 1, up to and including that specified by
this property use the low priority burst threshold.
All classes greater than the value of this property and up
to and including class 8 use the high priority burst threshold.
type=int default=8 minimum=1 maximum=8 Displayed(tab/group)=Low Burst Max Class (/Egress HSMDA) |
| hsmdaPerPacketOffset |
Specifies the packet byte offset to use for the HSMDA queue accounting.
Not supported for HSMDAv1.
type=int default=0 minimum=-64 maximum=31 units=bytes Displayed(tab/group)=Packet Byte Offset (/Egress HSMDA) |
| hwAggShapQsQSetSize |
Overrides the default queue set size configured at the FP resource policy.
When fp-resource-policy assigns non-shaper-queues for SAPs, we cannot
configure it. This object will always only override the queue set size when
configured at the fp-resource-policy level.The value of 0 means use non shaper
queues by overriding queue set size configured at the fp-resource-policy.
type=int default=-1 minimum=-1 maximum=8 Displayed(tab/group)=HW Aggregate Shaper Queues Queue Set Size |
| isMulticlassMlpppSubtype |
Specifies whether the access egress policy is an MC MLPPP access egress policy on the 7705 SAR.
When the port of a 7705 SAR L2 access interface is an MC MLPPP bundle, the parameter must be set to True on the access egress policy binding for the L2 access interface.
When the port of a 7705 SAR L2 access interface is not an MC MLPPP bundle or an MLPPP bundle, the Use As Multiclass MLPPP Policy For 7705 SAR parameter must be set to False on the access egress policy binding for the L2 access interface.
You cannot modify the parameter for a 7705 SAR local policy when the 7705 SAR has one or more L2 access interfaces that are bound to the policy.
type=generic.TruthValue default=false Displayed(tab/group)=Use As Multiclass MLPPP Policy For 7705 SAR |
| matchCriteria |
type=qos.FilterMatchCriteria access=read-only default=none Displayed(tab/group)=Match Criteria |
| numberOfIpMatches |
type=int access=read-only default=0 |
| parentLocation |
The Parent Location parameter specifies whether or not queue scheduler parenting is
enabled. Choosing the sla option sets the parenting to the sla-profile scheduler
hierarchy level. When you enable the default option, the egress queues are not
connected to a scheduler and are orphaned. This is also the case if the queue parent
scheduler name does not exist within the sla-profile scheduler policy, or a scheduler
policy has not been applied to the egress of the sla-profile. The options are:
• default
• sla
type=aengr.ParentLocationType default=default Displayed(tab/group)=Parent Location |
| policersHqosManageable |
Specifies whether the policers within this sap-egress policy are to be managed by the
Hierarchical QoS process when this policy is applied to egress SAP or egress SLA-profile.
type=boolean default=false Displayed(tab/group)=Policers HQoS Manageable |
| policyName |
Specifies the policy name set on the node.
type=string default= minimum=0 maximum=64 Displayed(tab/group)=NE Policy Name |
| postPolicerMappingPolicy |
Specifies the post policer mapping policy being applied to this policy.
type=Pointer default= Displayed(tab/group)=Post Policer Mapping Policy |
| scope |
Specifies whether the policy can be applied to a single object or multiple objects.
When the parameter is set to template, the policy can be applied to multiple objects.
You can override some settings in Access Egress policies that have the Scope parameter set to template.
When the parameter is set to exclusive, the policy can be applied to only a single object.
You can reassign the policy if you remove the existing assignment to the original object.
type=acl.ItemScope default=template Displayed(tab/group)=Scope |
| usePolResMrkDot1pInner |
Specifies whether this policy is using egress-policer for dot1-p inner marking.
When tSapEgressUsePolResMrkDot1pInner is set to 'true', it enables
using egress-policer result (in-profile vs. out-profile vs. exceed) as
a criteria which value dot1p-inner bits will be marked with.
type=boolean default=false Displayed(tab/group)=Use Policer Result Marking Dot1p Inner |
| Overridden Properties | |
|---|---|
| description | |
| displayedName | |
| id |
minimum=1 maximum=65535 |
| Properties inherited from policy.PolicyObject |
|---|
| description, displayedName, globalPolicy, id, isLocal, policyType, siteId, siteName, templateObject |
| Properties inherited from ManagedObject |
|---|
| actionMask, children-Set, deploymentState, isFaultSquelched, name, objectFullName, selfAlarmed |
| Methods |
|---|
aInHostSharedPccRuleEgrPolicyStruct
: aengr.RtrvHostSharedPccRuleEgrPolicyStruct -
resultFilter
: ResultFilter - (Optional) Filter for narrowing down the information returned per object
continueOnFailure
: continueOnFailure - (Optional) Continue processing requests in this stream if an exception occurs, unless the request is invalid. Default: false
infoList
: generic.CommonManagedEntityInformation -
aengr.Policy.retrieveHostSharedPccRuleEgressPolicyException
| Supported Network Elements | |
|---|---|
| 7450 ESS | |
| 7750 SR | |
| 7705 SAR Gen 2 | |
| 7705 SAR Hm | |
| 7705 SAR | |
| 7705 SAR H | |
| 7950 XRS | |
| Wavence SM | Supported from 18.1.0 |
| Product Specifics | |
| 7450 ESS 20.0 | |
| 7450 ESS 21.0 | |
| 7450 ESS 22.0 | |
| 7450 ESS 23.0 | |
| 7450 ESS 24.0 | |
| 7450 ESS 25.0 | |
| 7705 SAR Gen 2 25.0 | |
| 7705 SAR H 20.0 | |
| 7705 SAR H 21.0 | |
| 7705 SAR H 22.0 | |
| 7705 SAR H 23.0 | |
| 7705 SAR H 24.0 | |
| 7705 SAR H 25.0 | |
| 7705 SAR H 9.0 | |
| 7705 SAR Hm 20.0 | |
| 7705 SAR Hm 21.0 | |
| 7705 SAR Hm 22.0 | |
| 7705 SAR Hm 23.0 | |
| 7705 SAR Hm 24.0 | |
| 7705 SAR Hm 25.0 | |
| 7705 SAR 20.0 | |
| 7705 SAR 21.0 | |
| 7705 SAR 22.0 | |
| 7705 SAR 23.0 | |
| 7705 SAR 24.0 | |
| 7705 SAR 25.0 | |
| 7750 SR 20.0 | |
| 7750 SR 21.0 | |
| 7750 SR 22.0 | |
| 7750 SR 23.0 | |
| 7750 SR 24.0 | |
| 7750 SR 25.0 | |
| 7950 XRS 20.0 | |
| 7950 XRS 21.0 | |
| 7950 XRS 22.0 | |
| 7950 XRS 23.0 | |
| 7950 XRS 24.0 | |
| 7950 XRS 25.0 | |
| Wavence SM 19A.0.0 | |
| Wavence SM 20A.0.0 | |
| Wavence SM 21A.0.0 | |
| Wavence SM 22.0.0 | |
| Wavence SM 22A.0.0 | |
| Wavence SM 23.0.0 | |
| Wavence SM 23A.0.0 | |
| Wavence SM 24.0.0 | |
| Wavence SM 25.0.0 | |