| Overview | Package | Class | Deprecated | Help |
| Properties | |
|---|---|
| deMark |
Specifies whether the Ethernet frame is marked eligible to be dropped when the network traffic is in excess of the committed rate.
type=generic.TruthValue default=false Displayed(tab/group)=Mark DE bit (/Properties) |
| dot1p |
DEPRECATED: 9.0.R1 - DEPRECATED: inDot1p and outDot1p must be used for 6.0+ SR nodes. type=qos.Dot1pValueEnum default=default |
| exceedDot1p |
type=qos.Dot1pValueEnum default=default Displayed(tab/group)=Exceed Profile (/Dot1p) |
| exceedDscp |
type=qos.DscpEnum default=default Displayed(tab/group)=Exceed DSCP (/Properties) |
| exceedPrecedence |
type=qos.PrecedenceValueEnum default=default Displayed(tab/group)=Exceed Precedence (/Properties) |
| forceDeValue |
type=qos.DEValue default=default Displayed(tab/group)=Force DE value (/Properties) |
| forwardingClass |
type=qos.FcEnum access=read-create default=be Displayed(tab/group)=Forwarding Class |
| hsmdaQueueId |
Specifies the HSMDA queue to use for packets in this forwarding class.
This mapping will be used when the SAP is on a HSMDA MDA.
A value of zero implies that the default queues should be used.
Only supported for HSMDA v2.0.
type=qos.HsmdaQueueEnum default=0 minimum=0 maximum=8 Displayed(tab/group)=Queue ID (/Hsmda Queue) |
| inDot1p |
The In Profile parameter works in conjunction with the Out Profile parameter to optionally provide a specified dot1p combination that communicates the internal in-profile or out-of-profile marking to the adjacent NE, in cases where the DE bit cannot be used.
type=qos.Dot1pValueEnum default=default Displayed(tab/group)=In Profile (/Dot1p) |
| inDscp |
Specifies a DSCP value to be used for egress remarking of in-profile packets for the specified FC.
type=qos.DscpEnum default=default Displayed(tab/group)=In DSCP (/Properties) |
| inPrecedence |
Specifies an IP Precedence value to be used for egress remarking of in-profile packets for the specified FC.
type=qos.PrecedenceValueEnum default=default Displayed(tab/group)=In Precedence (/Properties) |
| innerTagDEMark |
The Inner-Tag Mark DE bit parameter allows the separate remarking of the inner VLAN tag to specify whether the Ethernet frame is marked eligible to be dropped when the network traffic is in excess of the committed rate.
type=generic.TruthValue default=false Displayed(tab/group)=Inner-Tag Mark DE bit (/Properties) |
| innerTagDot1PExceedProf |
Specifies 802.1p value to set in the inner VLAN tag of the packet for exceed-profile frames
in this forwarding class.
type=qos.Dot1pValueEnum default=default Displayed(tab/group)=Inner-Tag Exceed Profile (/Dot1p) |
| innerTagDot1PInProf |
Specifies which dot1p should be configured for the inner VLAN tag for traffic that is in profile.
type=qos.Dot1pValueEnum default=default Displayed(tab/group)=Inner-Tag In Profile (/Dot1p) |
| innerTagDot1POutProf |
Specifies which dot1p should be configured for the inner VLAN tag for traffic that is out of profile.
type=qos.Dot1pValueEnum default=default Displayed(tab/group)=Inner-Tag Out Profile (/Dot1p) |
| innerTagForceDEValue |
Specifies whether the inner VLAN tag’s Inner-Tag Mark DE bit parameter value is forced.
By default the discard eligible (DE) bit setting depends on whether the packet is in or out of profile.
type=qos.DEValue default=default Displayed(tab/group)=Inner-Tag Force DE value (/Properties) |
| outDot1p |
The Out Profile parameter works in conjunction with the In Profile parameter to optionally provide a specified dot1p combination that communicates the internal in-profile or out-of-profile marking to the adjacent NE, in cases where the DE bit cannot be used.
type=qos.Dot1pValueEnum default=default Displayed(tab/group)=Out Profile (/Dot1p) |
| outDscp |
Specifies a DSCP value to be used for egress remarking of out-of-profile packets for the specified FC.
type=qos.DscpEnum default=default Displayed(tab/group)=Out DSCP (/Properties) |
| outPrecedence |
Specifies an IP Precedence value to be used for egress remarking of out-of-profile packets for the specified FC.
type=qos.PrecedenceValueEnum default=default Displayed(tab/group)=Out Precedence (/Properties) |
| outerTagDEMark |
The Outer-Tag Mark DE bit parameter allows the separate remarking of the outer VLAN tag to specify whether the Ethernet frame is marked eligible to be dropped when the network traffic is in excess of the committed rate.
type=generic.TruthValue default=false Displayed(tab/group)=Outer-Tag Mark DE bit (/Properties) |
| outerTagDot1PExceedProf |
type=qos.Dot1pValueEnum default=default Displayed(tab/group)=Outer-Tag Exceed Profile (/Dot1p) |
| outerTagDot1PInProf |
Specifies which dot1p should be configured for the outer VLAN tag for traffic that is in profile
type=qos.Dot1pValueEnum default=default Displayed(tab/group)=Outer-Tag In Profile (/Dot1p) |
| outerTagDot1POutProf |
Specifies which dot1p should be configured for the outer VLAN tag for traffic that is out of profile.
type=qos.Dot1pValueEnum default=default Displayed(tab/group)=Outer-Tag Out Profile (/Dot1p) |
| outerTagForceDEValue |
Specifies whether the outer VLAN tag’s Outer-Tag Mark DE bit parameter value is forced.
By default the discard eligible (DE) bit setting depends on whether the packet is in or out of profile.
type=qos.DEValue default=default Displayed(tab/group)=Outer-Tag Force DE value (/Properties) |
| policerId |
type=long default=0 minimum=0 maximum=63 Displayed(tab/group)=Policer ID (/Policers) |
| portRedirectGroupQueue |
type=boolean default=false Displayed(tab/group)=Port Redirect Queue Group (/Policers), Port Redirect Queue Group (/Queue) |
| portRedirectHsmdaQueuePortGrpQ |
type=boolean default=false Displayed(tab/group)=Port Redirect Queue Group (/Hsmda Queue) |
| queueGroup |
type=string minimum=0 maximum=32 |
| queueGroupInstance |
type=int default=0 minimum=0 maximum=65535 Displayed(tab/group)=Instance ID (/Queue Group) |
| queueId |
type=int default=0 minimum=0 maximum=8 Displayed(tab/group)=Queue ID (/Queue Group), Queue ID (/Queue) |
| Properties inherited from policy.PolicyItemDefinition |
|---|
| containingPolicyDisplayedName, containingPolicyId |
| Properties inherited from policy.PolicyObject |
|---|
| description, displayedName, globalPolicy, id, isLocal, policyType, siteId, siteName, templateObject |
| Properties inherited from ManagedObject |
|---|
| actionMask, children-Set, deploymentState, isFaultSquelched, name, objectFullName, selfAlarmed |
| Supported Network Elements | |
|---|---|
| 7450 ESS | |
| 7750 SR | |
| 7705 SAR Gen 2 | |
| 7705 SAR Hm | |
| 7705 SAR | |
| 7705 SAR H | |
| 7950 XRS | |
| Wavence SM | Supported from 18.1.0 |
| Product Specifics | |
| 7450 ESS 20.0 | |
| 7450 ESS 21.0 | |
| 7450 ESS 22.0 | |
| 7450 ESS 23.0 | |
| 7450 ESS 24.0 | |
| 7450 ESS 25.0 | |
| 7705 SAR Gen 2 25.0 | |
| 7705 SAR H 20.0 | |
| 7705 SAR H 21.0 | |
| 7705 SAR H 22.0 | |
| 7705 SAR H 23.0 | |
| 7705 SAR H 24.0 | |
| 7705 SAR H 25.0 | |
| 7705 SAR H 9.0 | |
| 7705 SAR Hm 20.0 | |
| 7705 SAR Hm 21.0 | |
| 7705 SAR Hm 22.0 | |
| 7705 SAR Hm 23.0 | |
| 7705 SAR Hm 24.0 | |
| 7705 SAR Hm 25.0 | |
| 7705 SAR 20.0 | |
| 7705 SAR 21.0 | |
| 7705 SAR 22.0 | |
| 7705 SAR 23.0 | |
| 7705 SAR 24.0 | |
| 7705 SAR 25.0 | |
| 7750 SR 20.0 | |
| 7750 SR 21.0 | |
| 7750 SR 22.0 | |
| 7750 SR 23.0 | |
| 7750 SR 24.0 | |
| 7750 SR 25.0 | |
| 7950 XRS 20.0 | |
| 7950 XRS 21.0 | |
| 7950 XRS 22.0 | |
| 7950 XRS 23.0 | |
| 7950 XRS 24.0 | |
| 7950 XRS 25.0 | |
| Wavence SM 19A.0.0 | |
| Wavence SM 20A.0.0 | |
| Wavence SM 21A.0.0 | |
| Wavence SM 22.0.0 | |
| Wavence SM 22A.0.0 | |
| Wavence SM 23.0.0 | |
| Wavence SM 23A.0.0 | |
| Wavence SM 24.0.0 | |
| Wavence SM 25.0.0 | |