| Overview | Package | Class | Deprecated | Help |
| Properties | |
|---|---|
| advancedConfigPolicyPointer |
type=Pointer Displayed(tab/group)=Advanced Configuration Policy |
| cirPercent |
the administrative CIR percentage, in hundredths of a percent. Only applicable when rateType is
set to "percentage"
type=float default=0 minimum=0 maximum=100 units=% Displayed(tab/group)=CIR (CIR/PIR (Percentage)) |
| dynamicMbs |
specifies whether to allow modifying MBS size of a queue dynamically in order to maintain the
maximum latency for traffic in the queue based on queue's admin PIR and queue MBS bytes.
type=boolean default=false Displayed(tab/group)=Dynamic MBS (/Latency) |
| highDropTail |
Specifies the percentage at which high drop tail is being reduced from the MBS
type=int default=-1 minimum=-1 maximum=100 units=% Displayed(tab/group)=High Drop Tail (Burst Size) |
| highLowPriorityOnly |
Specifies the percentage of buffer space for the queue, used exclusively by high priority (exeed-profile) packets.
type=int default=-1 minimum=-1 maximum=100 units=% Displayed(tab/group)=High Low Priority Only (Burst Size) |
| highPlusDropTail |
Specifies the percentage at which highplus drop tail is being reduced from the MBS
type=int default=-1 minimum=-1 maximum=100 units=% Displayed(tab/group)=High Plus Drop Tail (Burst Size) |
| hsAlternateClassPool |
Specifies the name of the Slope policy to be applied for network-queue queue
type=boolean default=false Displayed(tab/group)=HS Alternate Port Class Pool (HSQ) |
| hsClassWeight |
Specifies the weight of the scheduling class
type=int default=1 minimum=1 maximum=8 Displayed(tab/group)=HS Class Weight (HSQ) |
| hsWredQueueSlopePlcyPointer |
Specifies the name of the Slope policy to be applied for network-queue queue
type=Pointer default=Slope:_tmnx_hs_default Displayed(tab/group)=HS WRED Slope Policy (HSQ) |
| hsWrrWeight |
Specifies the Weighted Round Robin (WRR) weight which this queue should parent
into the scheduler. The weight of each queue determines how much bandwidth that
queue gets out of the total rate for the scheduling class.
type=int default=1 minimum=1 maximum=127 Displayed(tab/group)=HS WRR Weight (HSQ) |
| pirPercent |
the administrative PIR percentage, in hundredths of a percent. Only applicable when rateType is
set to "percentage"
type=float default=100 minimum=0.01 maximum=100 units=% Displayed(tab/group)=PIR (CIR/PIR (Percentage)) |
| portParent |
Specifies whether this queue is parented by a port-level scheduler.
type=generic.TruthValue default=false Displayed(tab/group)=Port Parent |
| portParentCirLevel |
Specifies the port priority this queue will use to receive bandwidth from the port-level
scheduler for its within-cir offered load.
type=qos.LevelOrDefault default=defaultLevel Displayed(tab/group)=CIR Level (/Port Parent Association) |
| portParentCirWeight |
Specifies the weight this queue will use to receive bandwidth from the port-level scheduler for
its within-cir offered load.
type=qos.Weight default=weight0 Displayed(tab/group)=CIR Weight (/Port Parent Association) |
| portParentLevel |
Specifies the port priority this queue will use to receive bandwidth from the port-level
scheduler for its above-cir offered load.
type=qos.Level default=level1 Displayed(tab/group)=Level (/Port Parent Association) |
| portParentWeight |
Specifies the weight this queue will use to receive bandwidth from the port-level scheduler
for its above-cir offered load.
type=qos.Weight default=weight1 Displayed(tab/group)=Weight (/Port Parent Association) |
| queueDelay |
specifies the target queue-delay for packets forward through this queue.
type=int default=0 minimum=0 maximum=5000 units=msec Displayed(tab/group)=Queue Delay (/Latency) |
| wredQueue |
indicates if a WRED queue is to be created on the queue or not.
type=boolean default=false Displayed(tab/group)=Use WRED Queue (/Properties) |
| wredQueueMode |
Specifies the generic pool association of the queue for the purpose of allowing queue-specific WRED slopes.
type=qos.WredQMode default=native Displayed(tab/group)=WRED Queue Mode (/Properties) |
| wredQueueSlopePolicyPointer |
type=Pointer default=Slope:default Displayed(tab/group)=WRED Queue Slope Policy (/Properties) |
| wredQueueSlopeUsage |
Specifies which slopes are active for given slope mode.
type=qos.WredQSlopeUsage default=exceedLow Displayed(tab/group)=WRED Queue Slope Usage (/Properties) |
| Properties inherited from qgroup.Queue |
|---|
| burstLimit, cir, cirAdaptation, cirLevel, cirWeight, committedBurstSize, expedite, highPriorityReserved, level, maximumBurstSize, maximumBurstSizeBytes, pir, pirAdaptation, pktOffset, poolName, rateType, scheduler, weight |
| Properties inherited from policy.PolicyItemDefinition |
|---|
| containingPolicyDisplayedName, containingPolicyId |
| Properties inherited from policy.PolicyObject |
|---|
| description, displayedName, globalPolicy, id, isLocal, policyType, siteId, siteName, templateObject |
| Properties inherited from ManagedObject |
|---|
| actionMask, children-Set, deploymentState, isFaultSquelched, name, objectFullName, selfAlarmed |
| Supported Network Elements | |
|---|---|
| 7450 ESS | Supported from 7.0.R3 |
| 7750 SR | Supported from 7.0.R3 |
| 7705 SAR Gen 2 | |
| 7705 SAR Hm | |
| 7950 XRS | |
| Product Specifics | |
| 7450 ESS 20.0 | |
| 7450 ESS 21.0 | |
| 7450 ESS 22.0 | |
| 7450 ESS 23.0 | |
| 7450 ESS 24.0 | |
| 7450 ESS 25.0 | |
| 7705 SAR Gen 2 25.0 | |
| 7705 SAR Hm 20.0 | |
| 7705 SAR Hm 21.0 | |
| 7705 SAR Hm 22.0 | |
| 7705 SAR Hm 23.0 | |
| 7705 SAR Hm 24.0 | |
| 7705 SAR Hm 25.0 | |
| 7750 SR 20.0 | |
| 7750 SR 21.0 | |
| 7750 SR 22.0 | |
| 7750 SR 23.0 | |
| 7750 SR 24.0 | |
| 7750 SR 25.0 | |
| 7950 XRS 20.0 | |
| 7950 XRS 21.0 | |
| 7950 XRS 22.0 | |
| 7950 XRS 23.0 | |
| 7950 XRS 24.0 | |
| 7950 XRS 25.0 | |