| Overview | Package | Class | Deprecated | Help |
| Properties | |
|---|---|
| maxFailures |
The value of this property indicates the maximum number of
consecutive timeouts allowed before terminating the Trace
Route request.
A value of either 255 (maximum hop count/possible TTL value) or a 0 indicates that the function of terminating Trace Route request when a specific number of successive timeouts are detected is disabled. type=intdefault=5 minimum=0 maximum=255 Displayed(tab/group)=Maximum Failures (Results Configuration) |
| maxTimeToLive |
Specifies the maximum time-to-live value.
type=int default=64 minimum=1 maximum=255 Displayed(tab/group)=TTL (Test Parameters/Test Packets) |
| mepLinkTraceIngressMacAddress |
Specifies the Ingress MAC Address of linktrace replies.
type=MacAddress access=read-only |
| mepLinkTraceReceiveOrder |
Specifies the counter to retrieve linktrace replies.
type=long access=read-only default=1 minimum=1 maximum=4294967295 |
| mepLinkTraceSeqNumber |
Specifies the MEP Sequence number for linktrace results.
type=int access=read-only |
| mepLinkTraceTerminalMep |
Specifies if the MEP received all linktrace replies.
type=boolean access=read-only default=false |
| mepTransmitLtmFlags |
Bits - set value to useFDBonly - this actually issues command.
type=ethernetoam.LtmFlagBitType default=useFdbOnly |
| mepTransmitLtmSeqNumber |
Specifies the sequence number used linktrace test.
type=int access=read-only |
| mepTransmitLtmTargetIsMepId |
Specifies if the target is a MEP ID.
type=boolean access=read-only default=false |
| mepTransmitLtmTargetMacAddress |
Specifies the target MAC address for the test.
DEPRECATED: 7.0R4 - OBSOLETE: Use AbstractCfmDiagnostic.mepTargetMacAddr instead type=MacAddress |
| mepTransmitLtmTtl |
Specifies the TTL value used linktrace test.
type=int default=64 minimum=0 maximum=255 Displayed(tab/group)=TTL (/MEP Transmit LTM Information) |
| trapGenerationPolicy |
Specifies the notification(s) to send for a test run.
Each bit enables the transmission of one notification, as follows.
'probeFailure(0)': send one tmnxOamPingProbeFailedV3 notification if
at least M successive probes failed during the test run. M is
configured using tmnxOamPingCtlTrapProbeFailureFilter.
'testFailure(1)': send one tmnxOamPingTestFailedV3 notification if at
least N probes failed during the test run. N is configured using
tmnxOamPingCtlTrapTestFailureFilter.
'testCompletion(2)': send one tmnxOamPingTestCompletedV3 notification
when the test run is complete.
type=sas.TraceTrapGenerationPolicy default=testCompletion Displayed(tab/group)=Trap Generation (Results Configuration) |
| Properties inherited from ethernetoam.AbstractCfmDiagnostic |
|---|
| maintenanceAssociationId, maintenanceDomainId, mepId, mepIdEnabled, mepTargetMacAddr, mepTargetMepId, originatingMep, originatingNode, serviceId, serviceType, siteId, targetMep, targetName, toNodeId |
| Properties inherited from ethernetoam.AbstractCfmTest |
|---|
| globalMA |
| Properties inherited from sas.PseudoTest |
|---|
| assurance, fcQueue, forwardingClass, maxHistoryRows, packetFailureThreshold, packetInterval, packetTimeout, packetsToSend, profile, testFailureThreshold |
| Properties inherited from sas.AbstractTest |
|---|
| administrativeState, description, displayedName, failures, globalId, id, lastRunResult, runs, weight |
| Properties inherited from ManagedObject |
|---|
| actionMask, children-Set, deploymentState, isFaultSquelched, name, objectFullName, selfAlarmed |
| Methods inherited from sas.Test |
|---|
| adhocExecuteAndWait, executeAndWait, setNeSchedulableAdminState |
| Methods inherited from sas.AbstractTest |
|---|
| execute, stop |