| Overview | Package | Class | Deprecated | Help |
| Properties | |
|---|---|
| autoLearnMacProtect |
Specifies whether to enable automatic population of the MAC protect list with source MAC addresses learned on the SDP associated with this endpoint.
type=generic.TruthValue default=false Displayed(tab/group)=Auto Learn Mac Protect |
| blockOnMeshFailure |
type=boolean default=false Displayed(tab/group)=Block on Mesh SDP Failure |
| creationOrigin |
type=svt.L2RouteOriginType access=read-create default=manual |
| ignoreStandbySignalling |
Specifies whether the local internal tasks will take into
account the 'psuedo-wire forwarding standby' bit received
from the LDP peer which is normally ignored.
When it is enabled, the node will ignore standby bit received
from T-LDP peer. This property is presented also on
spoke SDP binding in VPLS. If the spoke SDP binding is
associated to an endpoint, this property can only be changed
on endpoint level. The user can not add a spoke SDP binding
to an endpoint with this property value conflict with the value
on endpoint. After adding spoke SDP binding to an endpoint,
the value of this property will inherit the value on endpoint.
type=boolean default=false Displayed(tab/group)=Ignore Standby Signalling |
| ipAddrType |
specifies the address type of multiChassisEndpointPeerIpAddress
type=rtr.InetAddressType access=read-only default=unknown |
| macPinning |
Specifies whether or not MAC address pinning is active on
this endpoint.
type=antispoof.MacPinningAdminState default=disabled Displayed(tab/group)=MAC Pinning |
| maxNumOfFibEntries |
Specifies the maximum number of learned and static entries allowed for this endpoint. The value
0 means: no limit for this endpoint. When the value of TIMETRA-CHASSIS-MIB is 'a' or 'b', the
maximum value of svcEndPointMacLimit is '131071'. When the value of
TIMETRA-CHASSIS-MIB::tmnxChassisOperMode is 'c', the maximum value of svcEndPointMacLimit is
196607. When the value of TIMETRA-CHASSIS-MIB is 'd', the maximum value of svcEndPointMacLimit
is 511999.
type=long default=0 minimum=0 maximum=196607 Displayed(tab/group)=Maximum FIB Entries |
| multiChassisEPMode |
type=boolean access=read-only Displayed(tab/group)=MC-EP Passive Mode (/Multi Chassis Endpoint Peer) |
| multiChassisEndpointId |
It is applicable to SR 7.0
type=long default=0 minimum=0 maximum=4294967295 Displayed(tab/group)=EndPoint ID (/Multi Chassis Endpoint Peer) |
| multiChassisEndpointPeerIpAddress |
It is applicable to SR 7.0
type=InetAddress default=0.0.0.0 |
| multiChassisEndpointPeerName |
It is applicable to SR 7.0
type=string default= minimum=0 maximum=80 |
| multiChassisEndpointPointer |
-->
The pointer of the Multi-Chassis Endpoint that this endpoint is associated with.
type=Pointer default= Displayed(tab/group)=Multi Chassis Endpoint Peer (/Multi Chassis Endpoint Peer) |
| restrictProtectedSource |
Indicates how the agent will handle relearn requests for protected MAC addresses received on the SDP belonging to this endpoint.
When the value of this object is 'true' requests to relearn a protected MAC address will be ignored.
In addition, if the value 'restrictProtectedSourceAction' is 'disable', then the SDP belonging to the endpoint where the
protected source MAC was seen will be brought operationally down.
type=generic.TruthValue default=false Displayed(tab/group)=Restrict Protected Source |
| restrictProtectedSourceAction |
Indicates the action to take whenever a relearn request for a protected MAC is received on the SDP belonging to this endpoint.
When the value of this object is 'disable' the SDP belonging to this endpoint will be placed in the operational down state,
with the operating flag 'recProtSrcMac' set.
When the value of this object is 'alarm-only', the SDP belonging to this endpoint will be left up and only a notification,
SdpReceivedProtSrcMac, will be generated.
When the value of this object is 'discardFrame', the SDP will start discarding the frame in addition to
generating SdpBindReceivedProtSrcMac notification
type=service.RestrictProtectedSourceAction default=disable Displayed(tab/group)=Restrict Protected Source Action |
| suppressStandbySignalling |
Specifies whether the 'pseudo-wire forwarding standby'
will be sent to the LDP peer. When it is enabled, the
standby bit will not be sent to T-LDP peer whenever
given spoke is selected as a standby which will allow faster
switch over as the traffic will be sent over this SDP binding
and discarded at blocking side of the connection. This is
particularly applicable to multicast traffic.
type=boolean default=true Displayed(tab/group)=Suppress Standby Signalling |
| templateVersionPointer |
Pointer to the template if this object was created from a template.
type=Pointer default= Displayed(tab/group)=Associated Template (Template/Associated Template) |
| type |
type=vpls.ServiceEndpointType default=singlechassis Displayed(tab/group)=Endpoint Type |
| Properties inherited from ManagedObject |
|---|
| actionMask, children-Set, deploymentState, isFaultSquelched, name, objectFullName, selfAlarmed |