| Overview | Package | Class | Deprecated | Help |
| Properties | |
|---|---|
| bersflinkdown |
The value of tmnxDS0ChanGroupBerSfLinkDown specifies whether or not
the DS0 channel-group will become operationally down when a BER-SF
alarm is raised. If tmnxDS0ChanGroupBerSfLinkDown is false then the
channel-group will not operationally change state due to BER-SF
alarms.
type=tdmequipment.BERSFLink default=disabled Displayed(tab/group)=BER SF Link Down (/BER-SF) |
| cemIdlePayloadFillPattern |
The value of tmnxDS0ChanGroupPayloadPattern specifies the idle payload
fill pattern when the CEM channel group experiences an underrun and
tmnxDS0ChanGroupPayloadFillType is set to 'userDefinedPattern'.
The default value depends on the encap type of the channel group:
For CEM encap channel group - 255 (Valid range 0..255)
For non-CEM encap channel group - 0 (Valid range 0..0).
type=long default=255 minimum=0 maximum=255 Displayed(tab/group)=Idle Payload Fill Pattern (/DS0 Fill Types and Patterns) |
| cemIdlePayloadFillType |
The value of tmnxDS0ChanGroupPayloadFillType specifies the type of
idle payload fill to be sent when the CEM channel group experiences
an underrun.
If the type is set to 'userDefinedPattern' then the value of
tmnxDS0ChanGroupPayloadPattern is used to define the payload pattern.
The default value depends on the encap type of the channel group:
For CEM encap - 'allOnes'
For all other encaps - 'notApplicable'
For a ds1-unframed and e1-unframed CEM encap DS0 channel group the
only supported value is 'allOnes'.
For non-CEM encap channel groups the value cannot be changed.
type=tdmequipment.DsxIdleFillType default=notApplicable Displayed(tab/group)=Idle Payload Fill Type (/DS0 Fill Types and Patterns) |
| cemIdleSignalFillPattern |
The value of tmnxDS0ChanGroupSignalPattern specifies the idle signal
fill pattern when the CAS CEM channel group experiences an underrun
and tmnxDS0ChanGroupSignalFillType is set to 'userDefinedPattern'.
CAS ESF DS1 and CAS E1 support 4 signalling bits per timeslot (ABCD)
CAS SF DS1 supports 2 signalling bits per timeslot (AB)
The default value depends on the type of channel group:
For CAS DS1 ESF or CAS E1 channel group - 15 (Valid range 0..15)
For CAS DS1 SF channel group - 3 (Valid range 0..3)
For non-CAS or non-CEM channel group - 0 (Valid range 0..0)
type=long default=0 minimum=0 maximum=15 Displayed(tab/group)=Idle Signal Fill Pattern (/DS0 Fill Types and Patterns) |
| cemIdleSignalFillType |
The value of tmnxDS0ChanGroupSignalFillType specifies the type of
idle signal fill to be sent when the CAS CEM channel group experiences
an underrun.
If the type is set to 'userDefinedPattern' then the value of
tmnxDS0ChanGroupSignalPattern is used to define the signal pattern.
The default value depends on the encap of the DS0 channel group and
the signal-mode of the DS1/E1:
For CEM encap on DS1/E1 with CAS signal mode - 'allOnes'
For all other encaps or non-CAS CEM DS1/E1 - 'notApplicable'
For CEM channel groups on DS1/E1 with no CAS signalling and non-CEM
encap channel groups the value cannot be changed.
type=tdmequipment.DsxIdleFillType default=notApplicable Displayed(tab/group)=Idle Signal Fill Type (/DS0 Fill Types and Patterns) |
| channelCRC |
type=tdmequipment.ChannelCRCType default=crc16 Displayed(tab/group)=CRC Precision (/Channel Group) |
| ds0ChanGroupLoopback |
aluExtDS0ChanGroupLoopback OBJECT-TYPE
SYNTAX INTEGER <
none (0),
line (1),
internal (2)
>
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of aluExtDS0ChanGroupLoopback specifies the type of loopback
applied to the DS0 channel group. The value of tmnxPortAdminStatus
should be set to 'outOfService' prior to applying loopback.
none - no loopback applied
line - loops ingress traffic back to the remote system
internal - loops egress traffic back to the local system
line(1) and internal(2) supported on a16-chds1v2 and a32-chds1v2 only.
"
DEFVAL < none >
::= < aluExtTmnxDS0ChanGroupEntry 2 >
type=tdmequipment.DS0Loopback default=none Displayed(tab/group)=Channel Group Loopback (/Signaling) |
| ds0SignalMode |
aluExtDS0ChanGroupSignalMode OBJECT-TYPE
SYNTAX INTEGER <
none (1),
cas (2)
>
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of aluExtDS0ChanGroupSignalMode indicates the type of signalling
associated with the channel:
none - Indicates no signalling on this channel.
cas - Indicates Channel Associated Signalling (CAS) on this channel.
The default signalling is 'none'. "
DEFVAL < none >
::= < aluExtTmnxDS0ChanGroupEntry 1 >
type=tdmequipment.SignalModeType default=none Displayed(tab/group)=Signal Mode (/Signaling) |
| idleCycleFlags |
type=tdmequipment.DSXIdleCycleFlags default=flags Displayed(tab/group)=Idle Cycle Flags (/Channel Group) |
| otherTimeSlotBits |
type=tdmequipment.Ds0ChannelList default=0 |
| parentDs1ChannelType |
type=tdmequipment.DS1Type access=read-only default=ds1 |
| scramble |
type=boolean default=true Displayed(tab/group)=Scramble (/Channel Group) |
| signalMode |
type=tdmequipment.SignalModeType access=read-only default=none |
| timeSlotBits |
type=tdmequipment.Ds0ChannelList default=0 Displayed(tab/group)=Time Slots (/Time Slots) |
| Properties inherited from equipment.ChannelSpecifics |
|---|
| channelRelativeName, physicalPortSnmpId |
| Properties inherited from equipment.PortSpecifics |
|---|
| cardSubType, isPortChannelALeaf, mprFraming, mprLineLength, portClass, portId, snmpPortId, specificCardType, upProtocols |
| Properties inherited from equipment.EquipmentSpecifics |
|---|
| displayedName, lockOlcState, olcState, shelfId, siteId, siteName |
| Properties inherited from ManagedObject |
|---|
| actionMask, children-Set, deploymentState, isFaultSquelched, name, objectFullName, selfAlarmed |