| Overview | Package | Class | Deprecated | Help |
| Properties | |
|---|---|
| fec128PseudowireId |
Specifies the value to be copied into the 'PW ID' (Pseudowire Identifier) field of
the 'FEC 128 Pseudowire' sub-TLV within the 'Target FEC Stack' TLV within the
launched VCCV ping request.
type=long access=read-only Displayed(tab/group)=PW ID (/Test Multi-Segment PW (FEC 128)) |
| fec128PseudowireType |
Specifies specifies the value to be copied into the 'PW Type' (Pseudowire Type) field
of the 'FEC 128 Pseudowire' sub-TLV within the 'Target FEC Stack' TLV within the
launched VCCV ping request.
type=long access=read-only Displayed(tab/group)=PW Type (/Test Multi-Segment PW (FEC 128)) |
| fec128SrcIpAddress |
Specifies the source address of the downstream SDP binding for VCCV ping test while targetFecType is FEC128.
type=InetAddress access=read-only Displayed(tab/group)=Sender IP Address (/Test Multi-Segment PW (FEC 128)) |
| fec128SrcIpAddressType |
Specifies the address type of the sourceIpAddress for VCCV ping test which switch to
downstream FEC 128 segments.
type=rtr.InetAddressType access=read-only |
| fec128TgtIpAddress |
Specifies the target address of the downstream SDP binding for VCCV ping test while targetFecType is FEC128.
type=InetAddress access=read-only Displayed(tab/group)=Destination IP Address (/Test Multi-Segment PW (FEC 128)) |
| fec128TgtIpAddressType |
Specifies the address type of the targetIpAddress for VCCV ping test which switch to
downstream FEC 128 segments.
type=rtr.InetAddressType access=read-only |
| forwardingClass |
Specifies the forwarding class the vccv ping used.
type=qos.FcEnum access=read-only Displayed(tab/group)=Forwarding Class (Test Parameters/Test Probe) |
| mplsTpSendMode |
Specifies the encapsulation of the launched echo request, when testing an MPLS-TP LSP
type=svt.MplsTpSendMode access=read-only Displayed(tab/group)=Send Mode (/Test Object/MPLS-TP VCCV Ping) |
| mplsTpToNodeAddressType |
Specifies the address type for the mplsTpToNodeId.
type=rtr.InetAddressType access=read-only |
| mplsTpToNodeId |
The node ID of the destination node.
type=InetAddress access=read-only Displayed(tab/group)=Destination IP Address (/Test Object/MPLS-TP VCCV Ping) |
| profile |
Specifies the profile value that was used with the
forwarding class specified in forwardingClass.
type=qos.Profile access=read-only Displayed(tab/group)=Forwarding Profile (Test Parameters/Test Probe) |
| pseudowireId |
Specifies the pseudowire Id to be used for performing a
vccv-ping operation. The pseudowire Id is a non-zero 32-bit
connection ID required by the FEC 128, as defined in RFE 4379.
This property is only valid when used in conjunction with
valid sourceIpAddress and targetIpAddress.
type=long access=read-only Displayed(tab/group)=VC ID (/Downstream SDP Binding), VC ID (/FEC 128 Configurations) |
| replyType |
The method of reply due to the vccv-ping request message.
type=svt.ReplyType access=read-only Displayed(tab/group)=Reply Type (Test Parameters/VCCV Ping Detail) |
| saiiAcId |
The value of this attribute specifies the attachment
circuit identifier of the Source Attachment Individual Identifier
(SAII) to be used when testing a FEC 129 AII Type 2 pseudowire.
type=long access=read-only Displayed(tab/group)=SAII AC ID (/SAII/TAII) |
| saiiAddress |
Specifies the Source AII address, which is one of the local prefix defined in this T-PE.
type=string access=read-only maximum=26 Displayed(tab/group)=SAII Address (/SAII/TAII) |
| saiiGlobalId |
The value of this attribute specifies the global
identifier of the Source Attachment Individual Identifier (SAII)
to be used when testing a FEC 129 AII Type 2 pseudowire.
type=long access=read-only |
| saiiPrefix |
The value of this attribute specifies the prefix of the
Source Attachment Individual Identifier (SAII) to be used when testing
a FEC 129 AII Type 2 pseudowire.
type=long access=read-only |
| serviceId |
Specifies the service ID associated with the CFM Test, If the originating MEP is a service MEP.
type=long access=read-only |
| serviceType |
Specifies the service type.
type=service.ServiceType access=read-only |
| sourceIpAddress |
Specifies the address to be used as the source for
performing the VCCV ping test.
type=InetAddress access=read-only Displayed(tab/group)=From Node ID (/Downstream SDP Binding) |
| sourceIpAddressType |
Specifies the address type of the sourceIpAddress.
type=rtr.InetAddressType access=read-only |
| spokeSdpBinding |
Specifies the sdp binding to be used for
performing the vccv ping.
type=Pointer access=read-only Displayed(tab/group)=First Spoke/Mesh SDP Binding (/Test Object) |
| spokeSdpFecPointer |
Specifies the spoke SDP FEC identifier to be used when performing a vccv-ping test on a FEC 129
pseudowire.
type=Pointer access=read-only Displayed(tab/group)=Spoke SDP FEC (/Test Multi-Segment PW (FEC 129)) |
| srcIpAddress |
The value of srcIpAddress specifies the source address for the VCCV ping test.The object holding the source address varies with the test's configuration, as specified in the following table.
tmnxOamVccvPingCtlTestSubMode SAA? Source Address Object
-------------------------------------------------------------
unspecified(1) N|Y tmnxOamPingCtlSrcAddress
static(2) N|Y tmnxOamPingCtlSrcAddress
fec128(3) N tmnxOamPingCtlSrcAddress
fec128(3) Y tmnxOamVccvPingCtlSrcAddress
The supported object combinations for VCCV ping tests are listed in
the tmnxOamVccvPingCtlTable DESCRIPTION clause.
type=InetAddress access=read-only Displayed(tab/group)= Source IP Address (/FEC 128 Configurations) |
| srcIpAddressType |
The value of srcIpAddressType specifies the address type of srcIpAddress
type=rtr.InetAddressType access=read-only |
| staticAgi |
Specifies the value to be copied into the 'Service Identifier' field of the 'Static
Pseudowire' sub-TLV within the 'Target FEC Stack' TLV within the launched VCCV ping
request.
type=string access=read-only maximum=21 Displayed(tab/group)=Attachment Group Identifier (/Test Multi-Segment PW (Static)) |
| staticSaiiAcId |
Specifies the value to be copied into the 'Source AC-ID' (Source Attachment Circuit
Identifier) field of the 'Static Pseudowire' sub-TLV within the 'Target FEC Stack'
TLV within the launched VCCV ping request.
type=long access=read-only Displayed(tab/group)=SAII AC ID (/Test Multi-Segment PW (Static)) |
| staticSaiiGlobalId |
Specifies the value to be copied into the 'Source Global ID' field of the 'Static
Pseudowire' sub-TLV within the 'Target FEC Stack' TLV within the launched VCCV ping
request.
type=long access=read-only Displayed(tab/group)=SAII Global ID (/Test Multi-Segment PW (Static)) |
| staticSaiiNodeAddressType |
Specifies the address type for the staticSaiiNodeId.
type=rtr.InetAddressType access=read-only |
| staticSaiiNodeId |
Specifies the value to be copied into the 'Source Node ID' field of the 'Static
Pseudowire' sub-TLV within the 'Target FEC Stack' TLV within the launched VCCV ping
request.
type=InetAddress access=read-only Displayed(tab/group)=SAII Node ID (/Test Multi-Segment PW (Static)) |
| staticTaiiAcId |
Specifies the value to be copied into the 'Destination AC-ID' (Source Attachment Circuit
Identifier) field of the 'Static Pseudowire' sub-TLV within the 'Target FEC Stack'
TLV within the launched VCCV ping request.
type=long access=read-only Displayed(tab/group)=TAII AC ID (/Test Multi-Segment PW (Static)) |
| staticTaiiGlobalId |
Specifies the value to be copied into the 'Destination Global ID' field of the 'Static
Pseudowire' sub-TLV within the 'Target FEC Stack' TLV within the launched VCCV ping
request.
type=long access=read-only Displayed(tab/group)=TAII Global ID (/Test Multi-Segment PW (Static)) |
| staticTaiiNodeAddressType |
Specifies the address type for the staticTaiiNodeId.
type=rtr.InetAddressType access=read-only |
| staticTaiiNodeId |
Specifies the value to be copied into the 'Destination Node ID' field of the 'Static
Pseudowire' sub-TLV within the 'Target FEC Stack' TLV within the launched VCCV ping
request.
type=InetAddress access=read-only Displayed(tab/group)=TAII Node ID (/Test Multi-Segment PW (Static)) |
| taiiAcId |
The value of this attribute specifies the attachment
circuit identifier of the Target Attachment Individual Identifier
(TAII) to be used when testing a FEC 129 AII Type 2 pseudowire.
type=long access=read-only Displayed(tab/group)=TAII AC ID (/SAII/TAII) |
| taiiAddress |
Specifies the Target AII address, which is one of the local prefix defined in target T-PE.
type=string access=read-only maximum=26 Displayed(tab/group)=TAII Address (/SAII/TAII) |
| taiiGlobalId |
The value of this attribute specifies the global
identifier of the Target Attachment Individual Identifier (TAII)
to be used when testing a FEC 129 AII Type 2 pseudowire.
type=long access=read-only |
| taiiPrefix |
The value of this attribute specifies the prefix of the
Target Attachment Individual Identifier (TAII) to be used when testing
a FEC 129 AII Type 2 pseudowire.
type=long access=read-only |
| targetAddress |
The value of targetAddress specifies the destination address for the VCCV ping test.
The object holding the destination address varies with the test's configuration, as specified in the following table.
tmnxOamVccvPingCtlTestSubMode SAA? Destination Address Object
-------------------------------------------------------------
unspecified(1) N|Y tmnxOamPingCtlTgtAddress
static(2) not supported
fec128(3) N tmnxOamPingCtlTgtAddress
fec128(3) Y tmnxOamVccvPingCtlTgtAddress
The supported object combinations for VCCV ping tests are listed in
the tmnxOamVccvPingCtlTable DESCRIPTION clause.
type=InetAddress access=read-only Displayed(tab/group)= Destination IP Address (/FEC 128 Configurations) |
| targetAddressType |
The value of targetAddressType specifies the address type of targetAddress
type=rtr.InetAddressType access=read-only |
| targetFecType |
Specifies the type of downstream FEC (Forward Equivalence Class) segment to be tested
type=svt.TargetFECType access=read-only Displayed(tab/group)=Target FEC Type (/Test Object) |
| targetIpAddress |
Specifies the address to be used as the destination
for the VCCV ping test.
type=InetAddress access=read-only Displayed(tab/group)=To Node ID (/Downstream SDP Binding) |
| targetIpAddressType |
Specifies the address type of the targetIpAddress.
type=rtr.InetAddressType access=read-only |
| testSubMode |
Specifies the type of LSP ping or LSP trace route test to perform.
type=svt.TestSubMode access=read-only Displayed(tab/group)=Test Type (/Test Object) |
| toNodeId |
The STM test targets the site specified in this property. (If target site is managed by NFM-P)
type=string access=read-only maximum=50 |
| tpLspTargetGlobalId |
The MPLS-TP LSP Destination Global ID to test..
type=long access=read-only Displayed(tab/group)=Destination Global ID (/Test Object/MPLS-TP VCCV Ping) |
| ttl |
The value of tmnxOamVccvPingCtlTtl specifies the time-to-live
value for the vc-label of the echo request message.
The outer label TTL is still set to the default of 255
regardless of this value."
type=int access=read-only Displayed(tab/group)=Time to Live |
| Overridden Properties | |
|---|---|
| id | The identifier for the STM test. |
| Properties inherited from sas.ArchivedPing |
|---|
| assurance, id, maxHistoryRows, packetFailureThreshold, packetInterval, packetSize, packetTimeout, packetsToSend, testFailureThreshold, trapGenerationPolicy |
| Properties inherited from sas.AbstractTest |
|---|
| administrativeState, description, displayedName, failures, globalId, id, lastRunResult, runs, weight |
| Properties inherited from ManagedObject |
|---|
| actionMask, children-Set, deploymentState, isFaultSquelched, name, objectFullName, selfAlarmed |
| Methods inherited from sas.AbstractTest |
|---|
| execute, stop |