| Overview | Package | Class | Deprecated | Help |
| Properties | |
|---|---|
| autoBindStrictTunnelTag |
The value of autoBindStrictTunnelTag specifies whether tunnel-tagging is strictly enforced.
type=boolean default=false Displayed(tab/group)=Enforce Strict Tunnel Tagging (/Auto Bind Tunnel) |
| autoBindTunnelBgp |
Specifies whether BGP type tunnel may be chosen as the tunnel within the service.
type=boolean default=false Displayed(tab/group)=BGP (/Auto Bind Tunnel) |
| autoBindTunnelFlexAlgoFallback |
Specifies whether to allow the use of routes with another flex-algo-id than configured as a fallback
option.
type=boolean default=false Displayed(tab/group)=Allow Flexible Algorithm Fallback (/Auto Bind Tunnel) |
| autoBindTunnelLdp |
Specifies whether LDP type tunnel may be chosen as the tunnel within the service.
type=boolean default=false Displayed(tab/group)=LDP (/Auto Bind Tunnel) |
| autoBindTunnelMaxEcmpRoutes |
Specifies the maximum number of equal cost paths that can be used for load balancing
when binding a BGP-EVPN next-hop to a set of LSPs.
type=int default=1 minimum=1 maximum=32 Displayed(tab/group)=Maximum ECMP Routes (/Auto Bind Tunnel) |
| autoBindTunnelMplsFwdPolicy |
Specifies whether MPLS Forwarding Policy tunnels can be used to resolve the next-hop of
bgp-vpn routes within the EVPN service.
type=boolean default=false Displayed(tab/group)=MPLS Forward Policy (/Auto Bind Tunnel) |
| autoBindTunnelRibApi |
Specifies whether RIB API can be used to resolve the next-hop of bgp-vpn routes within the EVPN
service.
type=boolean default=false Displayed(tab/group)=RIB-API (/Auto Bind Tunnel) |
| autoBindTunnelRsvpTe |
Specifies whether RSVP TE type tunnel may be chosen as the tunnel within the service.
type=boolean default=false Displayed(tab/group)=RSVP-TE (/Auto Bind Tunnel) |
| autoBindTunnelSrIsis |
Specifies whether a tunnel to next-hop of the L2 VPN prefix route is selected from the lowest numbered ISIS instance.
type=boolean default=false Displayed(tab/group)=SR-ISIS (/Auto Bind Tunnel) |
| autoBindTunnelSrOspf |
Specifies whether a tunnel to next-hop of the L2 VPN prefix route is selected from the lowest numbered ISIS instance.
type=boolean default=false Displayed(tab/group)=SR-OSPF (/Auto Bind Tunnel) |
| autoBindTunnelSrOspf3 |
Specifies whether a tunnel to next-hop of the L2 VPN prefix route is selected from the
lowest numbered OSPFv3 instance.
type=boolean default=false Displayed(tab/group)=SR-OSPF3 (/Auto Bind Tunnel) |
| autoBindTunnelSrPolicy |
The value of autoBindTunnelSrPolicy specifies whether segment-routing policy tunnels can be used to
resolve the next-hop of bgp-vpn routes within the EVPN service.
type=boolean default=false Displayed(tab/group)=SR-Policy (/Auto Bind Tunnel) |
| autoBindTunnelSrTe |
specifies whether SR-TE tunnels can be used to resolve the next-hop of bgp-vpn routes within the EVPN service
type=boolean default=false Displayed(tab/group)=SR-TE (/Auto Bind Tunnel) |
| autoBindTunnelStatus |
Specifies the resolution status of this entry.
type=bgp.ResolveStatus default=disabled Displayed(tab/group)=Resolution Status (/Auto Bind Tunnel) |
| autoBindTunnelUdp |
Specifies whether BGP type tunnel may be chosen as the tunnel within the service.
type=boolean default=false Displayed(tab/group)=UDP (/Auto Bind Tunnel) |
| autoBindTunnelWeightedEcmp |
Specifies the number of tunnels that the auto-bind tunnel can resolve over a VPRN.
type=boolean default=false Displayed(tab/group)=Weighted ECMP (/Auto Bind Tunnel) |
| bgpEvpnDefaultRouteTag |
Specifies the default route tag passed by EVPN onto the policy module so that it can
be matched on export policies.
type=int default=0 minimum=0 maximum=255 Displayed(tab/group)=Default Route Tag |
| dynamicEgressLabelLimit |
This value determines whether, when BGP resolves routes, it accounts for the presence of control-word,
ethernet-segment label etc or not.
type=boolean default=false Displayed(tab/group)=Dynamic Egress Label Limit |
| entropyLabel |
The value of entropyLabel specifies whether the use of entropy-label is enabled or not for the EVPN MPLS instance.
type=boolean default=false Displayed(tab/group)=Enable Entropy Label |
| memberOperGroupName |
The member group name that this mpls is assigned to.
type=string default= |
| memberOperGroupPtr |
The pointer to the operational group as a member. Used for UI display. For OSSI setting, use:
svr.BgpEvpnMpls.memberOperGroupName instead.
type=Pointer default= Displayed(tab/group)=Member Group Name (/Operational Group) |
| mplsControlWord |
Specifies whether the use of 'ControlWord' is enabled on BGP EVPN MPLS or not.
type=boolean default=false Displayed(tab/group)=Control Word |
| mplsEncapsulationEnabled |
Specifies the whether the use of MPLS encapsulation is enabled for this service.
type=boolean default=true Displayed(tab/group)=MPLS Encapsulation Enabled |
| mplsEviThreeByteAutoRt |
The value of mplsEviThreeByteAutoRt enables RFC8365
compliant auto-derivation for EVIs for this service.
type=boolean default=false Displayed(tab/group)=Three Byte Auto RT |
| mplsForceQinqVcFwding |
Specifies whether or not the datapath should forcefully insert two VLAN tags which are copied from
the qinq service-delimiting vlan values.
type=svr.ForceQinQVcFwdType default=none Displayed(tab/group)=Force Q-in-Q VC Forwarding |
| mplsForceVlanVcForwarding |
Specifies whether or not vc-vlan-type forwarding is forced in the data-path for BGP EVPN MPLS.
type=boolean default=false Displayed(tab/group)=Force Vlan Vc Forwarding |
| mplsHashLabel |
Specifies whether the use of hash label is enabled or not for the EVPN MPLS instance.
The object controls the use of hash-label in the EVPN destinations.
- When set to true and inclusiveMcastL2AtrrAdvertisement is set to false,
the hash-label is always pushed to a unicast EVPN destination.
The hash-label is never used for BUM packets.
- When set to true and inclusiveMcastL2AtrrAdvertisement is set to true,
the F bit is set in the Layer-2 Attributes extended community
of the EVPN IMET route for the service.
The hash-label towards a given remote PE is pushed in the data path
only if the remote PE previously signaled support for hash-label (F=1)."
type=boolean default=false Displayed(tab/group)=Hash Label |
| mplsMaxEcmpRoutes |
Specifies the maximum ECMP routes required for controlling all-active routing to MAC/IP with the same ethernet-segment-identifier (ESI).
type=int default=1 minimum=1 maximum=32 Displayed(tab/group)=Maximum ECMP Routes |
| mplsOverUdpEncapsulationEnabled |
Specifies the whether the use of MPLS over Udp encapsulation is enabled for this service.
type=boolean default=false Displayed(tab/group)=MPLS Over UDP Encapsulation Enabled |
| routeNextHopAddress |
Specifies whether a tunnel to next-hop of the L2 VPN prefix route is selected from the lowest numbered OSPFv3 instance.
type=InetAddress default=0.0.0.0 Displayed(tab/group)=Route Next Hop Address |
| routeNextHopAddressType |
Specifies the address type of routeNextHopAddress.
type=rtr.InetAddressType default=unknown |
| routeNextHopType |
Specifies the type of the route next-hop associated with this entry.
When routeNextHopType is set to 'explicit', routeNextHopAddress should not be set to default.
When routeNextHopType is set to 'ipv4/ipv6', routeNextHopAddress should not be set to a non-default value.
type=int default=ipv4 Displayed(tab/group)=Route Next Hop Type enums= 0: ipv4 - System IPv4 1: ipv6 - System IPv6 2: explicit - Explicit |
| service.OperGrpBindingMember-Set |
type=Children-Set |
| Properties inherited from svr.AbstractBgpEvpnSubInstance |
|---|
| bgpEvpnAdminStatus, bgpEvpnInstanceType, bgpEvpnVxlanInstanceId, bgpInstanceId, evpnSiteServiceId, siteId |
| Properties inherited from ManagedObject |
|---|
| actionMask, children-Set, deploymentState, isFaultSquelched, name, objectFullName, selfAlarmed |
| Supported Network Elements | |
|---|---|
| 7450 ESS | Supported from 16.0.R1 |
| 7750 SR | Supported from 16.0.R1 |
| 7705 SAR Gen 2 | |
| 7705 SAR | Supported from 22.10.R2 |
| 7705 SAR H | Supported from 22.10.R2 |
| 7950 XRS | Supported from 16.0.R1 |
| 7250 IXR | Supported from 19.5.R1 |
| Product Specifics | |
| 7250 IXR 20.0 | |
| 7250 IXR 21.0 | |
| 7250 IXR 22.0 | |
| 7250 IXR 23.0 | |
| 7250 IXR 24.0 | |
| 7250 IXR 25.0 | |
| 7450 ESS 20.0 | |
| 7450 ESS 21.0 | |
| 7450 ESS 22.0 | |
| 7450 ESS 23.0 | |
| 7450 ESS 24.0 | |
| 7450 ESS 25.0 | |
| 7705 SAR Gen 2 25.0 | |
| 7705 SAR H 23.0 | |
| 7705 SAR H 24.0 | |
| 7705 SAR H 25.0 | |
| 7705 SAR 22.0 | |
| 7705 SAR 23.0 | |
| 7705 SAR 24.0 | |
| 7705 SAR 25.0 | |
| 7750 SR 20.0 | |
| 7750 SR 21.0 | |
| 7750 SR 22.0 | |
| 7750 SR 23.0 | |
| 7750 SR 24.0 | |
| 7750 SR 25.0 | |
| 7950 XRS 20.0 | |
| 7950 XRS 21.0 | |
| 7950 XRS 22.0 | |
| 7950 XRS 23.0 | |
| 7950 XRS 24.0 | |
| 7950 XRS 25.0 | |