| Overview | Package | Class | Deprecated | Help |
| Properties | |
|---|---|
| forwardingClass |
Specifies the forwarding class the MAC ping will use.
type=qos.FcEnum default=be Displayed(tab/group)=Forwarding Class (Test Parameters/Test Probe) |
| labeltimeout |
Specifies the vc-label time-to-live value
type=long default=5 minimum=1 maximum=255 Displayed(tab/group)=Time To Live (Test Parameters/Test Probe) |
| packetData |
An arbitrary amount of data to be included in the Data TLV, if the Data TLV is selected to be sent.
type=string access=read-create default= maximum=255 Mandatory on create Displayed(tab/group)=Packet Data (/VLAN Information) |
| profile |
Specifies the profile value to be used with the
forwarding class specified in forwardingClass.
type=qos.Profile default=out Displayed(tab/group)=Forwarding Profile (Test Parameters/Test Probe) |
| replyControl |
The Reply Control parameter specifies whether the OAM response
arrives on the control plane.
The options are:
Enabled
Disabled (default)
type=boolean default=false Displayed(tab/group)=Reply Control (Test Parameters/Test Probe) |
| sendControl |
type=boolean default=false Displayed(tab/group)=Send Control (Test Parameters/Test Probe) |
| serviceId |
type=long access=read-only default=0 |
| servicePointer |
type=Pointer access=read-create default= Mandatory on create Displayed(tab/group)=Service (/Service) |
| sitePointer |
type=Pointer access=read-create default= Mandatory on create Displayed(tab/group)=Site (/Site) |
| sourceMacAddress |
type=MacAddress default=00-00-00-00-00-00 Displayed(tab/group)=Source MAC Address (/Test Object) |
| targetMacAddress |
type=MacAddress default=FF-FF-FF-FF-FF-FF Displayed(tab/group)=Target MAC Address (/Test Object) |
| testInterval |
Specifies the interval for this Test
type=int default=10 minimum=10 maximum=1500 units=minutes Displayed(tab/group)=Test Interval (Test Parameters/Test Probe) |
| testTargetType |
type=sas.TestTarget access=read-create Mandatory on create Displayed(tab/group)=Target Type (/Test Object) |
| type |
type=service.ElementalType default=vplsSite |
| vlanDropEnable |
Drop Enable bit value to be used in the VLAN tag.
type=boolean access=read-create default=false Displayed(tab/group)=Drop Enable (/VLAN Information) |
| vlanPriority |
Specifies the priority.
type=int access=read-create default=0 minimum=0 maximum=7 Displayed(tab/group)=Priority (/VLAN Information) |
| Overridden Properties | |
|---|---|
| packetSize |
mrinfo ping does not use this field.
minimum=1 |
| Properties inherited from sas.Ping |
|---|
| assurance, maxHistoryRows, packetFailureThreshold, packetInterval, packetSize, packetTimeout, packetsToSend, testFailureThreshold, trapGenerationPolicy |
| Properties inherited from sas.AbstractTest |
|---|
| administrativeState, description, displayedName, failures, globalId, id, lastRunResult, runs, weight |
| Properties inherited from ManagedObject |
|---|
| actionMask, children-Set, deploymentState, isFaultSquelched, name, objectFullName, selfAlarmed |
| Methods |
|---|
deployer
: Deployer - the deployment state
synchronousDeploy
: boolean - (Optional) Specify whether to block until the changes have been fully deployed to the network. A value of "true" means to block. A value of "false" means to return immediately. Default: false (asynchronous)
clearOnDeployFailure
: boolean - (Optional) Specify whether to clear any failed deployers. A value of "true" means to clear. A value of "false" means to leave the failed deployer. Default: false
deployRetries
: int - (Optional) The number of times to attempt re-deployment during synchronous deployment. This parameter is meaningless in the asynchronous case. Default: 0
deployRetryInterval
: long - (Optional) The number of milliseconds to wait between deployment retries. This parameter is meaningless in the asynchronous case. Default: 0
taskDescription
: string - (Optional) A user friendly description of what the operation does. This information will be used by the task manager.
instanceFullName
: string - the full name of the object.
continueOnFailure
: continueOnFailure - (Optional) Continue processing requests in this stream if an exception occurs, unless the request is invalid. Default: false| Methods inherited from sas.Test |
|---|
| adhocExecuteAndWait, executeAndWait, setNeSchedulableAdminState |
| Methods inherited from sas.AbstractTest |
|---|
| execute, stop |