| Overview | Package | Class | Deprecated | Help |
| Properties | |
|---|---|
| forwardingClass |
Specifies the forwarding class .
type=qos.FcEnum default=be Displayed(tab/group)=Forwarding Class (Test Parameters/Test Probe) |
| profile |
Specifies the profile value to be used with the
forwarding class specified in forwardingClass.
type=qos.Profile default=out Displayed(tab/group)=Forwarding Profile (Test Parameters/Test Probe) |
| replyViaControlPlane |
When the value of replyViaControlPlane is 'true', the
OAM ping response is returned using the control plane.
If its value is 'false', the packet is sent via the data
plane
type=boolean default=false Displayed(tab/group)=Reply Via Control Plane (Test Parameters/Test Probe) |
| sendViaControlPlane |
When the value of sendViaControlPlane is 'true', the
OAM ping response is send using the control plane.
If its value is 'false', the packet is sent via the data
plane
type=boolean default=false Displayed(tab/group)=Send Via Control Plane (Test Parameters/Test Probe) |
| serviceId |
type=long access=read-only default=0 |
| servicePointer |
type=Pointer access=read-create default= Mandatory on create Displayed(tab/group)=Service (/Service) |
| sitePointer |
type=Pointer access=read-create default= Mandatory on create Displayed(tab/group)=Site (/Site) |
| sourceIpAddress |
Specifies the address to be used as the source for
performing the CPE ping test.
type=InetAddress default=0.0.0.0 Displayed(tab/group)=Source IP Address (/Test Object) |
| sourceIpAddressType |
Specifies the address type of sourceIpAddress.
type=rtr.InetAddressType access=read-only default=ipv4 |
| sourceMacAddress |
When set to a non zero value, the system will use the value as
source mac address in the ARP request that will be sent to the CPE.
If set to 0, the MAC address configured for the CPM is used.
type=MacAddress default=00-00-00-00-00-00 Displayed(tab/group)=Source MAC Address (/Test Object) |
| targetIpAddress |
Specifies the address to be used as the destination
for the CPE ping test.
type=InetAddress default=0.0.0.0 Displayed(tab/group)=Destination IP Address (/Test Object) |
| targetIpAddressType |
Specifies the address type of targetIpAddress.
type=rtr.InetAddressType access=read-only default=ipv4 |
| vcLabelTtl |
Specifies the VC-label's time-to-live value.
When performing the test with a ttl=1, the cpe-ping is only done
to the local SAP(s).
type=int default=255 minimum=1 maximum=255 Displayed(tab/group)=VC's Label Time To Live (Test Parameters/Test Probe) |
| Properties inherited from sas.Ping |
|---|
| assurance, maxHistoryRows, packetFailureThreshold, packetInterval, packetSize, packetTimeout, packetsToSend, testFailureThreshold, trapGenerationPolicy |
| Properties inherited from sas.AbstractTest |
|---|
| administrativeState, description, displayedName, failures, globalId, id, lastRunResult, runs, weight |
| Properties inherited from ManagedObject |
|---|
| actionMask, children-Set, deploymentState, isFaultSquelched, name, objectFullName, selfAlarmed |
| Methods inherited from sas.Test |
|---|
| adhocExecuteAndWait, executeAndWait, setNeSchedulableAdminState |
| Methods inherited from sas.AbstractTest |
|---|
| execute, stop |