service
ArchivedMacPing

Archived test. Represents an MAC ping operation used to test the connectivity in a VLL or VPLS service by verifying a remote MAC address.



public class ArchivedMacPing

Properties
forwardingClass Specifies the forwarding class the MAC ping will use.

type=qos.FcEnum
access=read-only
Displayed(tab/group)=Forwarding Class (Test Parameters/Test Probe)

labeltimeout Specifies the vc-label time-to-live value

type=long
access=read-only
Displayed(tab/group)=Time To Live (Test Parameters/Test Probe)

packetData An arbitrary amount of data to be included in the Data TLV, if the Data TLV is selected to be sent.

type=string
access=read-only
maximum=255
Displayed(tab/group)=Packet Data (/VLAN Information)

profile Specifies the profile value to be used with the forwarding class specified in forwardingClass.

type=qos.Profile
access=read-only
Displayed(tab/group)=Forwarding Profile (Test Parameters/Test Probe)

replyControl The Reply Control parameter specifies whether the OAM response arrives on the control plane. The options are: Enabled Disabled (default)

type=boolean
access=read-only
Displayed(tab/group)=Reply Control (Test Parameters/Test Probe)

sendControl

type=boolean
access=read-only
Displayed(tab/group)=Send Control (Test Parameters/Test Probe)

serviceId

type=long
access=read-only

servicePointer

type=Pointer
access=read-only
Displayed(tab/group)=Service (/Service)

sitePointer

type=Pointer
access=read-only
Displayed(tab/group)=Site (/Site)

sourceMacAddress

type=MacAddress
access=read-only
Displayed(tab/group)=Source MAC Address (/Test Object)

targetMacAddress

type=MacAddress
access=read-only
Displayed(tab/group)=Target MAC Address (/Test Object)

testInterval Specifies the interval for this Test

type=int
access=read-only
Displayed(tab/group)=Test Interval (Test Parameters/Test Probe)

testTargetType

type=sas.TestTarget
access=read-only
Displayed(tab/group)=Target Type (/Test Object)

type

type=service.ElementalType
access=read-only

vlanDropEnable Drop Enable bit value to be used in the VLAN tag.

type=boolean
access=read-only
Displayed(tab/group)=Drop Enable (/VLAN Information)

vlanPriority Specifies the priority.

type=int
access=read-only
Displayed(tab/group)=Priority (/VLAN Information)

 
Overridden Properties
id The identifier for the STM test.

 
Properties inherited from sas.ArchivedPing
assurance, id, maxHistoryRows, packetFailureThreshold, packetInterval, packetSize, packetTimeout, packetsToSend, testFailureThreshold, trapGenerationPolicy
 
Properties inherited from sas.ArchivedTest
accountingFiles, accountingPolicyObjectPointer, continuousExec, ethernetSwitchCardId, fromNodeId, nePersistent, neSchedulable, neTestIndex, neTestOwner, nmUser, originatingTest, ownerType, testResultStorage, testSuite, testSuiteId, testSuiteTestedEntity, testType, testedObject
 
Properties inherited from sas.AbstractTest
administrativeState, description, displayedName, failures, globalId, id, lastRunResult, runs, weight
 
Properties inherited from ManagedObject
actionMask, children-Set, deploymentState, isFaultSquelched, name, objectFullName, selfAlarmed
 
Methods inherited from sas.AbstractTest
execute, stop