|
Properties |
|
bidirectionalMipEgress |
Allocates resources to enable the use of Primary VLAN
on egress MIPs on the NE for VPLS services.
A reboot of the card or NE is required for the configured value to take effect.
type=int
default=0
minimum=0
maximum=1
Displayed(tab/group)=Bi Directional MIP Egress (/SAP Egress Internal TCAM)
|
|
dCpuProtection |
Allocates resources to support configuration of distribute CPU protection on L2 and L3
interfaces
on the device to which the policy is assigned
type=int
default=-2
minimum=-2
maximum=2
Displayed(tab/group)=NE DDoS Protection Resource (/NE DDoS Protection)
|
|
downMep |
Specifies the amount of system resources allocated to down
MEPs on egress
ports for the device.
type=int
default=1
minimum=1
maximum=3
Displayed(tab/group)=Down MEP Resource (/Ethernet CFM )
|
|
egressMacAuthentication |
Specifies the Egress system resource allocation for port based dot1x MAC authentication.
type=int
default=0
minimum=0
maximum=1
Displayed(tab/group)=Egress MAC Authentication Resource (/MAC Authentication)
|
|
egressTcamEthCfm |
Egress tcam eth cfm resource.
type=int
default=0
minimum=0
maximum=1
Displayed(tab/group)=Egress Internal TCAM ETH CFM (/SAP Egress Internal TCAM)
|
|
egressTcamSapAggregateMeter |
Enables and allocates resources to egress aggregate meters for L2 and L3 interfaces
on the device to which the policy is assigned.
type=int
default=0
minimum=0
maximum=2
Displayed(tab/group)=Egress SAP Aggregate Meter (/SAP Egress Internal TCAM)
|
|
ethernetCfm |
type=int
default=1
minimum=-2
maximum=4
Displayed(tab/group)=Total CFM Resource (/Ethernet CFM )
|
|
g8032VlanSapEnd |
G8032 control sap tag end vlan
type=int
default=0
minimum=0
maximum=3512
Displayed(tab/group)=G8032 VLAN Range SAP End (/G8032 VLAN Range Sap)
|
|
g8032VlanSapStart |
G8032 control sap tag start vlan
type=int
default=0
minimum=0
maximum=3512
Displayed(tab/group)=G8032 VLAN Range SAP Start (/G8032 VLAN Range Sap)
|
|
ingressMacAuthentication |
Specifies the Ingress system resource allocation for port based dot1x MAC authentication.
type=int
default=0
minimum=0
maximum=1
Displayed(tab/group)=Ingress MAC Authentication Resource (/MAC Authentication)
|
|
isG8032VlanSapApplicable |
Specifies whether G8032 control sap tag is applicable or not.
type=boolean
default=false
Displayed(tab/group)=G8032 VLAN Range SAP Applicable (/G8032 VLAN Range Sap)
|
|
qosAccessPortIngress |
Specifies the operational resources used for qos network
ingress slices for this card.
type=int
default=0
minimum=0
maximum=3
Displayed(tab/group)=QoS Access Port Ingress (/QoS Ingress Resource)
|
|
qosNetworkIngress |
Specifies the operational resources used for qos network
ingress slices for this card.
type=int
default=-2
minimum=-2
maximum=2
Displayed(tab/group)=QoS Network Ingress (/QoS Ingress Resource)
|
|
sapEgressAcl |
type=int
default=0
minimum=-2
maximum=2
Displayed(tab/group)=Total ACL Resource (/SAP Egress Internal ACL)
|
|
sapEgressAcl128bitIpV6 |
Specifies the amount of system resources allocated
to 128-bit IPv6
addresses, for egress internal ACLs in the device.
type=int
default=0
minimum=0
maximum=2
Displayed(tab/group)=128-bit IPv6 Resource (/SAP Egress Internal ACL)
|
|
sapEgressAcl64bitMacIpV6 |
Specifies the amount of system resources allocated
to 64-bit MAC and IPv6
addresses combined, for egress internal ACLs
in the device.
type=int
default=0
minimum=0
maximum=2
Displayed(tab/group)=64-bit MAC/IPv6 Resource (/SAP Egress Internal ACL)
|
|
sapEgressAclMac |
type=int
default=0
minimum=0
maximum=2
Displayed(tab/group)=MAC Resource (/SAP Egress Internal ACL)
|
|
sapEgressAclMacIpV4 |
Specifies the amount of system resources allocated
to MAC and IPv4
addresses combined, for egress internal ACLs in the
device.
type=int
default=0
minimum=0
maximum=2
Displayed(tab/group)=MAC/IPv4 Resource (/SAP Egress Internal ACL)
|
|
sapEgressQos |
Specifies the total amount of system resources allocated
to egress Qos for the policy.
type=int
default=-2
minimum=-2
maximum=2
Displayed(tab/group)=Total QoS Resource (/SAP Egress QoS Resources)
|
|
sapIngressAcl |
type=int
default=0
minimum=-2
maximum=10
Displayed(tab/group)=Total ACL Resource (/SAP Ingress Internal ACL)
|
|
sapIngressAcl128bitIpV4IpV6 |
type=int
default=0
minimum=-1
maximum=10
Displayed(tab/group)=128-bit IPv4/v6 Resource (/SAP Ingress Internal ACL)
|
|
sapIngressAcl64bitIpV6 |
type=int
default=0
minimum=-1
maximum=10
Displayed(tab/group)=64-bit IPv6 Resource (/SAP Ingress Internal ACL)
|
|
sapIngressAclIpV4 |
type=int
default=0
minimum=-1
maximum=10
Displayed(tab/group)=IPv4 Resource (/SAP Ingress Internal ACL)
|
|
sapIngressAclMac |
type=int
default=0
minimum=-1
maximum=10
Displayed(tab/group)=MAC Resource (/SAP Ingress Internal ACL)
|
|
sapIngressAggMeter |
Specifies the amount of system resources allocated
to SAP aggregate meters
in the device.
type=int
default=0
minimum=-2
maximum=4
Displayed(tab/group)=SAP Aggregate Meter
|
|
sapIngressQos |
type=int
default=0
minimum=-2
maximum=12
Displayed(tab/group)=Total QoS Resource (/SAP Ingress QoS Resources)
|
|
sapIngressQosIpV4 |
type=int
default=0
minimum=-1
maximum=12
Displayed(tab/group)=IPv4 Resource (/SAP Ingress QoS Resources)
|
|
sapIngressQosIpV4IpV6 |
type=int
default=0
minimum=-1
maximum=12
Displayed(tab/group)=IPv4/v6 Resource (/SAP Ingress QoS Resources)
|
|
sapIngressQosIpV4Mac |
Specifies the amount of system resources allocated
to MAC and IPv4 addresses combined,for Ingress Qos
for the policy.
type=int
default=0
minimum=-1
maximum=12
Displayed(tab/group)=IPv4/Mac Resource (/SAP Ingress QoS Resources)
|
|
sapIngressQosMac |
type=int
default=0
minimum=-1
maximum=12
Displayed(tab/group)=MAC Resource (/SAP Ingress QoS Resources)
|
|
sdpDownMep |
type=int
default=1
minimum=1
maximum=2
Displayed(tab/group)=Sdp Down MEP Resource (/Ethernet CFM )
|
|
upMep |
Specifies the amount of system resources allocated to
up MEPs on egress
ports for the device.
type=int
default=0
minimum=0
maximum=2
Displayed(tab/group)=Up MEP Resource (/Ethernet CFM )
|