Overview Package Class Deprecated Help

sasqos
PortAccessIngressIpMatchCriteria

public class PortAccessIngressIpMatchCriteria

Properties
destinationIpAddrType

type=rtr.InetAddressType
default=ipv4
destinationIpAddress

type=InetAddress
default=0.0.0.0
Displayed(tab/group)=Destination IP (/IP Properties)
destinationIpAddressFullMask

type=InetAddress
default=0.0.0.0
Displayed(tab/group)=Destination IP full Mask (/IP Properties)
destinationIpAddressMask

type=acl.IpAddrMask
default=ipAddrMask0
minimum=0
maximum=32
Displayed(tab/group)=Dst Mask (/IP Properties)
destinationOperator Specifies match criteria for TCP or UDP packets. Select the check box to enable the parameter. The Destination Port parameter operates in conjunction with the Port Dst (destinationPort1) parameter. When the Destination Port parameter is set to EQUAL, packets whose destination port value is the same as the Port Dst parameter value are considered a match. When the Destination Port parameter is set to NONE, packets whose destination port value differs from the Port Dst parameter are considered a match. When packets match, the Forwarding Class and Profile specified in the match entry are assigned to the packets.

type=acl.Operator
default=NONE
Displayed(tab/group)=Destination Port (/Port Properties)
destinationPort1 Specifies the destination port match value for TCP or UDP packets. Select the check box to enable the parameter. The Port Dst parameter works in conjunction with the Destination Port (destinationOperator) parameter. When the Destination Port parameter is set to EQUAL, packets whose destination port value is the same as the Port Dst parameter value are considered a match. When the Destination Port parameter is set to NONE, packets whose destination port value differs from the Port Dst parameter are considered a match. When packets match, the Forwarding Class and Profile specified in the match entry are assigned to the packets.

type=int
default=0
minimum=0
maximum=65535
Displayed(tab/group)=Port Dst (/Port Properties)
destinationPort2

type=int
default=0
minimum=0
maximum=65535
Displayed(tab/group)=To Port Dst (/Port Properties)
dscp

type=qos.DscpEnum
default=default
Displayed(tab/group)=DSCP (/DSCP)
dscpMask Specifies an optional bitmask value for the associated DSCP Value parameter.

type=int
default=0
minimum=0
maximum=63
Displayed(tab/group)=DSCP Mask (/DSCP)
dscpValue Specifies a user-defined numerical DSCP value as a match criteria.

type=int
default=-1
minimum=-1
maximum=63
Displayed(tab/group)=DSCP Value (/DSCP)
ipPrecedence Specifies the decimal value of the IP Precedence bits for the match criteria entry. When an ingress packet matches the specified IP Precedence value, the actions associated with the match criteria entry are taken.

type=qos.PrecedenceValueEnum
default=default
Displayed(tab/group)=Precedence Value (/IP Precedence)
ipPrecedenceMask Specifies bitmask settings for precedence bits in the IP header. For each bit in the IP Precedence field, a bitmask value of 1 indicates a match, and 0 indicates no match.

type=qos.DefaultlessPrecedenceValueEnum
default=value_0
Displayed(tab/group)=Precedence Mask (/IP Precedence)
protocol

type=acl.Protocol
default=ALL
minimum=-1
maximum=255
Displayed(tab/group)=Protocol
sourceIpAddrType

type=rtr.InetAddressType
default=ipv4
sourceIpAddress

type=InetAddress
default=0.0.0.0
Displayed(tab/group)=Source IP (/IP Properties)
sourceIpAddressFullMask

type=InetAddress
default=0.0.0.0
Displayed(tab/group)=Source IP full mask (/IP Properties)
sourceIpAddressMask

type=acl.IpAddrMask
default=ipAddrMask0
minimum=0
maximum=32
Displayed(tab/group)=Src Mask (/IP Properties)
sourceOperator Specifies match criteria for TCP or UDP packets. Select the check box to enable the parameter. The Source Port parameter operates in conjunction with the Port Src (sourcePort1) parameter. When the Source Port parameter is set to EQUAL, packets whose source port value is the same as the Port Src parameter value are considered a match. When the Source Port parameter is set to NONE, packets whose source port value differs from the Port Src parameter are considered a match. When packets match, the Forwarding Class and Profile specified in the match entry are assigned to the packets.

type=acl.Operator
default=NONE
Displayed(tab/group)=Source Port (/Port Properties)
sourcePort1 Specifies the source port match value for TCP or UDP packets. Select the check box to enable the parameter. The Port Src parameter operates in conjunction with the Source Port (sourceOperator) parameter. When the Source Port parameter is set to EQUAL, packets whose source port value is the same as the Port Src parameter value are considered a match. When the Source Port parameter is set to NONE, packets whose source port value differs from the Port Src parameter are considered a match. When packets match, the Forwarding Class and Profile specified in the match entry are assigned to the packets.

type=int
default=0
minimum=0
maximum=65535
Displayed(tab/group)=Port Src (/Port Properties)
sourcePort2

type=int
default=0
minimum=0
maximum=65535
Displayed(tab/group)=To Port Src (/Port Properties)
  
Properties inherited from sasqos.PortAccessIngressMatch
defaultFcProfile, description, displayedName, forwardingClass, id
 
Properties inherited from policy.PolicyItemDefinition
containingPolicyDisplayedName, containingPolicyId
 
Properties inherited from policy.PolicyObject
description, displayedName, globalPolicy, id, isLocal, policyType, siteId, siteName, templateObject
 
Properties inherited from ManagedObject
actionMask, children-Set, deploymentState, isFaultSquelched, name, objectFullName, selfAlarmed
 
Methods inherited from sasqos.PortAccessIngressMatch
renum
 
Supported Network Elements
7210 SAS Mxp Supported from 23.3.R1
Product Specifics
7210 SAS Mxp 23.0
7210 SAS Mxp 24.0
7210 SAS Mxp 25.0