| Overview | Package | Class | Deprecated | Help |
| Properties | |
|---|---|
| destinationMacAddress |
Specifies a destination MAC address to be used as the match criterion.
When the configured Destination MAC parameter matches the destination MAC address of a packet,
the Forwarding Class and Profile specified in the match entry are assigned to the packet.
type=MacAddress default=00-00-00-00-00-00 Displayed(tab/group)=Destination MAC (/Match Criteria) |
| destinationMacAddressMask |
Provides an option to specify a mask that is associated with the Destination MAC
(destinationMacAddress)
parameter configured in the policy. The Destination MAC parameter and the associated mask are
used in
conjunction to specify a range of MAC addresses as the match criteria for assigning the
specified Forwarding Class
and Profile to the packet.
type=MacAddress default=00-00-00-00-00-00 Displayed(tab/group)=Destination Mask (/Match Criteria) |
| dot1pMask |
Provides an option to specify a mask that is associated with the Dot1p (dot1pValue) parameter
configured in the policy. The Dot1p parameter and the associated mask are used to specify a
range of
dot1p values as the match criteria for assigning the specified Forwarding Class and Profile to
the packet.
type=qos.Dot1pPriority default=priority_0 Displayed(tab/group)=Dot1p Mask (/Match Criteria) |
| dot1pValue |
Specifies the IEEE 802.1p value to be used as the match criterion.
When the configured Dot1p parameter matches the dot1p value of a packet,
the Forwarding Class and Profile specified in the match entry are assigned to the packet.
type=qos.Dot1pPriority default=default Displayed(tab/group)=Dot1p (/Match Criteria) |
| ethernetType |
The Ether Type parameter specifies an Ethernet type II value as the match criterion.
Deselect the check box to set the parameter to the default value and select the check box to
enter a value.
The range is 1536 to 65 535, or -1.
The default is -1, indicating that filtering for this parameter is disabled.
type=int default=-1 minimum=-1 maximum=65535 Displayed(tab/group)=Ether Type (/Match Criteria - Ethernet II) |
| frameType |
Ethernet type II frame where the 802.3 length field is used as an Ethernet
type (Etype) value. Etype values are two byte values greater than 0x5FF (1535 decimal).
Only Ethernet type II is supported.
type=sasqos.FrameType access=read-only default=ethernetII Displayed(tab/group)=Frame Type |
| innerDot1pMask |
Provides an option to specify a mask that is associated with the Inner Dot1p (innerDot1pValue)
parameter configured in the match entry.
The Inner Dot1p parameter and the associated mask are used to specify a range of inner tag dot1p
values as the match criteria for assigning
the specified Forwarding Class and Profile to the packet.
type=qos.Dot1pPriority default=priority_0 Displayed(tab/group)=Inner Dot1p Mask (/Match Criteria) |
| innerDot1pValue |
Specifies the inner dot1p value to be used as the match criterion.
When the configured Inner Dot1p value matches the PCP value of the inner tag of a packet,
the Forwarding Class and Profile specified in the match entry are assigned to the packet.
type=qos.Dot1pPriority default=default Displayed(tab/group)=Inner Dot1p (/Match Criteria) |
| innerTagMask |
Provides an option to specify a mask that is associated with the Inner Tag Value (innerTagValue)
parameter configured in
the match entry. The Inner Tag Value parameter and the associated mask are used to specify a
range of inner tag VIDs as
the match criteria for assigning the specified Forwarding Class and Profile to the packet.
type=long default=4095 minimum=1 maximum=4095 Displayed(tab/group)=Inner Tag VID Mask (/Match Criteria/VID) |
| innerTagValue |
Specifies an inner tag VID to be used as the match criterion.
When the configured Inner Tag Value matches the VID of the inner tag of a packet,
the Forwarding Class and Profile specified in the match entry are assigned to the packet.
type=int default=-1 minimum=-1 maximum=4095 Displayed(tab/group)=Inner Tag Value (/Match Criteria/VID) |
| outerDot1pMask |
Provides an option to specify a mask that is associated with the Outer Dot1p (outerDot1pValue)
parameter
configured in the match entry. The Outer Dot1p parameter and the associated mask are used
to specify a range of outer tag dot1p values as the match criteria for assigning
the specified Forwarding Class and Profile to the packet.
type=qos.Dot1pPriority default=priority_0 Displayed(tab/group)=Outer Dot1p Mask (/Match Criteria) |
| outerDot1pValue |
Specifies the outer dot1p value to be used as the match criterion.
When the configured Outer Dot1p value matches the PCP value of the outer tag of a packet,
the Forwarding Class and Profile specified in the match entry are assigned to the packet.
type=qos.Dot1pPriority default=default Displayed(tab/group)=Outer Dot1p (/Match Criteria) |
| outerTagMask |
Provides an option to specify a mask that is associated with the Outer Tag Value (outerTagValue)
parameter configured in the match entry.
The Outer Tag Value parameter and the associated Outer Tag VID Mask are used to specify a range
of inner tag VIDs as the match criteria for assigning
the specified Forwarding Class and Profile to the packet.
type=long default=4095 minimum=1 maximum=4095 Displayed(tab/group)=Outer Tag VID Mask (/Match Criteria/VID) |
| outerTagValue |
Specifies an outer tag VID to be used as the match criterion.
When the configured Outer Tag Value matches the VID of the outer tag of a packet,
the Forwarding Class and Profile specified in the match entry are assigned to the packet.
type=int default=-1 minimum=-1 maximum=4095 Displayed(tab/group)=Outer Tag Value (/Match Criteria/VID) |
| sourceMacAddress |
Specifies a source MAC address to be used as the match criterion.
When the configured Source MAC parameter matches the source MAC address of a packet,
the Forwarding Class and Profile specified in the match entry are assigned to the packet.
type=MacAddress default=00-00-00-00-00-00 Displayed(tab/group)=Source MAC (/Match Criteria) |
| sourceMacAddressMask |
Provides an option to specify a mask that is associated with a Source MAC (sourceMacAddress)
parameter configured in the policy. The Source MAC parameter and the associated mask are used in
conjunction
to specify a range of MAC addresses as the match criteria for assigning the specified Forwarding
Class and
Profile to the packet.
type=MacAddress default=00-00-00-00-00-00 Displayed(tab/group)=Source Mask (/Match Criteria) |
| Properties inherited from sasqos.Match |
|---|
| id |
| Properties inherited from sasqos.QueueClassificationObject |
|---|
| defaultFcProfile, forwardingClass |
| Properties inherited from policy.PolicyItemDefinition |
|---|
| containingPolicyDisplayedName, containingPolicyId |
| Properties inherited from policy.PolicyObject |
|---|
| description, displayedName, globalPolicy, id, isLocal, policyType, siteId, siteName, templateObject |
| Properties inherited from ManagedObject |
|---|
| actionMask, children-Set, deploymentState, isFaultSquelched, name, objectFullName, selfAlarmed |
| Methods inherited from sasqos.Match |
|---|
| renum |
| Supported Network Elements | |
|---|---|
| 7210 SAS M | |
| 7210 SAS X | |
| 7210 SAS E | |
| 7210 SAS D | |
| 7210 SAS T | |
| 7210 SAS Mxp | |
| 7210 SAS Dxp | |
| 7210 SAS S/Sx | |
| 7250 IXR | Supported until 19.5.R1 |
| 7210 SAS R | |
| 7210 SAS K | |
| Product Specifics | |
| 7210 SAS D (all versions) | |
| 7210 SAS Dxp (all versions) | |
| 7210 SAS E (all versions) | |
| 7210 SAS K (all versions) | |
| 7210 SAS M (all versions) | |
| 7210 SAS Mxp (all versions) | |
| 7210 SAS R (all versions) | |
| 7210 SAS S/Sx (all versions) | |
| 7210 SAS T (all versions) | |
| 7210 SAS X (all versions) | |