| Overview | Package | Class | Deprecated | Help |
| Properties | |
|---|---|
| endSysMacAddr |
The value of endSysMacAddr specifies the end system
MAC address to be verified by the test. The value is copied into the
MAC Address #1 field of the End-System MAC Sub-TLV of the launched OAM
Echo request.
type=MacAddress access=read-only Displayed(tab/group)=End System Mac Address (Test Parameters/Test Details) |
| forwardingClass |
Specifies the forwarding class the VXLAN ping will use.
type=qos.FcEnum access=read-only Displayed(tab/group)=Forwarding Class (Test Parameters/Test Probe) |
| iFlag |
The value of ifFlag specifies the I flag value to be
used for the test. The value is copied into the I flag field of the
VXLAN Header of the launched OAM echo request.
type=boolean access=read-only Displayed(tab/group)=I-Flag (Test Parameters/Test Details) |
| inIpDstAddr |
The value of inIpDstAddr specifies the inner
destination IP address to be used for the test. The value is copied
into the Destination IP Address field of the Inner IP Header of the
launched OAM Echo request.
Addresses in the address block 127.0.0.0/8 are accepted. The default
address is 127.0.0.1.
type=InetAddress access=read-only Displayed(tab/group)=Inner Destination IP Address (Test Parameters/Test Details) |
| inIpDstAddrType |
The value of inIpDstAddrType specifies the type of
address in inIpDstAddr
type=rtr.InetAddressType access=read-only |
| inIpSrcAddr |
The value of inIpSrcAddr specifies the inner source
IP address to be used for the test. The value is copied into the
Source IP Address field of the Inner IP Header of the launched OAM Echo
request.
The default value is the configured system IPv4 address.
type=InetAddress access=read-only Displayed(tab/group)=Inner Source IP Address (Test Parameters/Source) |
| inIpSrcAddrType |
The value of inIpSrcAddrType specifies the type of
address in inIpSrcAddr
type=rtr.InetAddressType access=read-only |
| inL2DestMac |
The value of inL2DestMac specifies the inner
Destination MAC address to be used for the test. The value is copied
into the Inner Destination MAC Address field of the Inner Ethernet
Header of the launched OAM echo request.
type=MacAddress access=read-only Displayed(tab/group)=Inner Destination Mac Address (Test Parameters/Test Details) |
| networkId |
The value of networkId specifies the VXLAN Network
Identifier (VNI) of the VXLAN network to be tested. The value is
copied into the VXLAN Network Identifier field of the VXLAN Header of
the launched OAM echo request.
type=int access=read-only Displayed(tab/group)=VXLAN Network Identifier (VNI) (/VNI) |
| outIpTtl |
The value of outIpTtl specifies the outer IP Time To
Live value to be used for the test. The value is copied into the Time
To Live field of the Outer IPv4 Header of the launched OAM echo
request.
type=int access=read-only Displayed(tab/group)=Outer IP Time To Live (Test Parameters/Test Details) |
| outSrcUdpPt |
The value of outSrcUdpPt specifies the outer source
UDP port to be used for the test.
type=int access=read-only Displayed(tab/group)=Outer Source UDP port (Test Parameters/Test Details) |
| packetIntervalUnits |
Specifies the units for tmnxOamPingCtlInterval. For example, if tmnxOamPingCtlIntervalUnits
has the value 'centiseconds(2)', and tmnxOamPingCtlInterval has the
value 10, the test's interval is 0.1 seconds.
The supported combinations of tmnxOamPingCtlIntervalUnits,
tmnxOamPingCtlInterval, tmnxOamPingCtlTestMode, are specified in the
tmnxOamPingCtlInterval DESCRIPTION clause.
type=sas.PacketIntervalUnitsType access=read-only Displayed(tab/group)=Interval Units (Test Parameters/Test Probe) |
| profile |
Specifies the profile value to be used with the
forwarding class specified in forwardingClass.
type=qos.Profile access=read-only Displayed(tab/group)=Forwarding Profile (Test Parameters/Test Probe) |
| reflectPad |
The value of reflectPad specifies whether or not to
copy the pad TLV from the OAM echo request to the OAM echo response.
The combination of reflectPad='true(1)' and
tmnxOamPingCtlSize=0 is rejected, because tmnxOamPingCtlSize=0
indicates there is no pad TLV to be copied.
The combination of tmnxOamVxlanPingCtlReflectPad='true(1)' and
replyMode='udp(2)' is rejected.
type=boolean access=read-only Displayed(tab/group)=Reflect Pad (Test Parameters/Test Probe) |
| replyMode |
The value of replyMode specifies the encapsulation
to be used in the OAM echo reply. The value is copied into the Reply
Mode field of the Generic Overlay OAM structure of the launched OAM
echo request. The replying node uses the value to choose the
encapsulation of the OAM echo reply.
type=sas.ReplyModeEnum access=read-only Displayed(tab/group)=Reply Mode (Test Parameters/Test Probe) |
| serviceId |
Service Id
type=long access=read-only |
| serviceSite |
The service for the test.
type=Pointer access=read-only Displayed(tab/group)=Service |
| targetIpAddress |
Specifies the address to be used as the DNS server.
type=InetAddress access=read-only Displayed(tab/group)=Outer IP Destination (/Target IP) |
| targetIpAddressType |
Specifies the address type of the targetIpAddress.
type=rtr.InetAddressType access=read-only |
| vxlanTestId |
The value of vxlanTestId specifies a unique identifier
for the test. The value is copied into the Originator Handle field of
the Generic Overlay OAM structure of the launched OAM echo request.
type=long access=read-only Displayed(tab/group)=VXLAN Test Id (/VXLAN Test Id) |
| Overridden Properties | |
|---|---|
| id | The identifier for the STM test. |
| Properties inherited from sas.ArchivedPing |
|---|
| assurance, id, maxHistoryRows, packetFailureThreshold, packetInterval, packetSize, packetTimeout, packetsToSend, testFailureThreshold, trapGenerationPolicy |
| Properties inherited from sas.AbstractTest |
|---|
| administrativeState, description, displayedName, failures, globalId, id, lastRunResult, runs, weight |
| Properties inherited from ManagedObject |
|---|
| actionMask, children-Set, deploymentState, isFaultSquelched, name, objectFullName, selfAlarmed |
| Methods inherited from sas.AbstractTest |
|---|
| execute, stop |