| Overview | Package | Class | Deprecated | Help |
| Properties | |
|---|---|
| adminVersion |
The configured version of MLD which is running for this host
type=ressubscr.MldVersion default=version2 Displayed(tab/group)=Administrative Version |
| disableRtrAlertCheck |
Defines the scheduler to be applied for egress-rate modification.
Enable/disable router alert checking for MLD messages received for this policy.
type=generic.TruthValue default=false Displayed(tab/group)=Disable Router Alert Check |
| egrRateModSchedulerName |
Defines the scheduler to be applied for egress-rate modification.
type=string default= minimum=0 maximum=32 Displayed(tab/group)=Rate Modification Scheduler |
| egrRateModificationType |
Specifies the egress-rate modification that is to be applied. If set to 'namedScheduler', the
scheduler as defined in egrRateModSchedulerName is used
type=ancp.EgrModificationTypes default=none Displayed(tab/group)=Rate Modification |
| fastLeave |
Specify whether fast leave is allowed for this host. If set to 'enabled(1)', the system prunes
the port on which an MLD 'leave' message has been received without waiting for the Group
Specific Query to timeout
type=ressubscr.AdministrativeState default=enabled Displayed(tab/group)=Fast-Leave |
| hostMaxGroups |
specifies the maximum number of groups for which MLD can have local
receiver information based on received MLD reports for this host.
type=int default=0 minimum=0 maximum=16000 Displayed(tab/group)=Maximum Number Of Groups |
| hostMaxGrpSources |
Specifies how many group source addresses are allowed per group address for the MSAP.
The value 0 means that no limit is imposed.
type=int default=0 minimum=0 maximum=32000 Displayed(tab/group)=Maximum Number Of Group Sources |
| hostMaxSources |
Specifies the maximum number of sources for which MLD can have local receiver information
based on received MLD reports for this host.
type=int default=0 minimum=0 maximum=1000 Displayed(tab/group)=Maximum Number Of Sources |
| importPolicy |
The import policy that is to be applied on this host MLD policy
type=string default= minimum=0 maximum=32 Displayed(tab/group)=Import Policy |
| lastLstnrQryIntvl |
Specifies the Max Response Time inserted into Group-Specific Queries sent in response to
Leave Group messages, and is also the amount of time between Group-Specific Query messages.
This value may be tuned to modify the leave latency of the network. A reduced value
results in reduced time to detect the loss of the last member of a group
type=int default=0 minimum=0 maximum=1023 units=seconds Displayed(tab/group)=Last Listener Query Interval |
| perHostReplication |
Specifies whether per-host replication is allowed for this host. If set to 'enabled(1)',
outgoing traffic will be replicated per host, else it will be replicated per SAP. When traffic
is replicated per host, a copy of each outgoing multicast traffic packet will be sent to the
unicast MAC address of each host individually, else a single copy will be sent to the multicast
MAC address per SAP. This is only applicable for non-PPP hosts. In case of PPP host, traffic is
always replicated per host
type=ressubscr.AdministrativeState default=disabled Displayed(tab/group)=Per Host Replication |
| queryInterval |
Specifies the frequency at which the MLD Host-Query packets are transmitted for this policy.
Valid range for query interval is 0 or 2..1024.
type=int default=0 minimum=0 maximum=1024 units=seconds Displayed(tab/group)=Query Interval |
| queryResponseIntvl |
Specifies maximum query response time advertised in MLD v2 queries for this policy
type=int default=0 minimum=0 maximum=1023 units=seconds Displayed(tab/group)=Response Query Interval |
| redirectionPolicy |
Specifies the redirection policy that is to be applied on this host Mld policy
type=string default= minimum=0 maximum=32 Displayed(tab/group)=Redirection Policy |
| ressubscr.MldPolicyStatic-Set |
type=Children-Set |
| Overridden Properties | |
|---|---|
| displayedName |
Unique policy identity
access=read-create minimum=1 maximum=32 |
| Properties inherited from policy.PolicyObject |
|---|
| description, displayedName, globalPolicy, id, isLocal, policyType, siteId, siteName, templateObject |
| Properties inherited from ManagedObject |
|---|
| actionMask, children-Set, deploymentState, isFaultSquelched, name, objectFullName, selfAlarmed |
| Supported Network Elements | |
|---|---|
| 7750 SR |
Supported from 12.0.R1 until 16.0.R4
|
| 7450 ESS | Supported from 12.0.R1 |
| Product Specifics | |
| 7450 ESS 20.0 | |
| 7450 ESS 21.0 | |
| 7450 ESS 22.0 | |
| 7450 ESS 23.0 | |
| 7450 ESS 24.0 | |
| 7450 ESS 25.0 | |
| 7750 SR 20.0 | |
| 7750 SR 21.0 | |
| 7750 SR 22.0 | |
| 7750 SR 23.0 | |
| 7750 SR 24.0 | |
| 7750 SR 25.0 | |