| Overview | Package | Class | Deprecated | Help |
| Properties | |
|---|---|
| announceDirection |
type=ptp.PtpDirection access=read-only default=rx Displayed(tab/group)=Announce Direction |
| bidirMonitoredIpPathPointer |
Pointer to the bidirectional monitored IP path for this Peer.
type=Pointer default= Displayed(tab/group)=Bidirectional IP Path Monitor (Path Monitoring) |
| clockIndex |
type=int default=0 |
| creationOrigin |
type=svt.L2RouteOriginType access=read-create default=manual |
| isSyncEEnabled |
type=boolean access=read-only default=false Displayed(tab/group)=Sync-E Enabled |
| monitoredIpPathPointer |
Pointer to the monitored IP path for this Peer.
type=Pointer default= Displayed(tab/group)=IP Path Monitor (Path Monitoring) |
| peerAdminState |
type=ptp.AluPtpClockAdminState default=inService Displayed(tab/group)=Admin State |
| peerAlternateProfile |
type=string access=read-only default=primary Displayed(tab/group)=Profile Name |
| peerClockDomain |
type=long access=read-only default=0 minimum=0 maximum=255 Displayed(tab/group)=Domain |
| peerClockId |
type=string access=read-only Displayed(tab/group)=Peer Clock ID |
| peerClockLocalPortNumber |
type=long access=read-only Displayed(tab/group)=Peer Clock Local Port Number |
| peerClockProfile |
Specifies the standard that defines the PTP features allowed on a device.
type=ptp.Alu1588PtpProfile access=read-only default=2 Displayed(tab/group)=PTP Profile |
| peerClockRemotePortNumber |
type=long access=read-only Displayed(tab/group)=Peer Clock Remote Port Number |
| peerClockType |
type=ptp.Alu1588PtpClockType access=read-only default=2 Displayed(tab/group)=Peer Clock Type |
| peerCurrentMaster |
type=boolean access=read-only Displayed(tab/group)=Current Master (/Peer Master Status) |
| peerDescription |
type=string default= maximum=80 Displayed(tab/group)=Peer Description |
| peerDiscovered |
type=boolean access=read-only default=false Displayed(tab/group)=Peer Discovered |
| peerDomain |
type=long access=read-only default=0 minimum=0 maximum=127 |
| peerId |
type=int access=read-create default=0 minimum=1 maximum=10 Displayed(tab/group)=Peer Id |
| peerIndex |
type=long access=read-create default=1 |
| peerIpAddrType |
type=rtr.InetAddressType default=ipv4 valid enums=ipv4, ipv6, unknown (Where parent is one of (ptp.IEEEPTPPort, vprn.Site)) suppress enums=ipv6 (Where parent is one of (ptp.IEEEPTPPort, vprn.Site)) (until 23.3.R1) |
| peerIpAddress |
type=InetAddress default=0.0.0.0 Displayed(tab/group)=Peer IP Address |
| peerLastChanged |
type=Date access=read-only default=0 Displayed(tab/group)=Peer Last Changed |
| peerLastRxPort |
type=string access=read-only Displayed(tab/group)=Last Rx Port |
| peerLastTxPort |
type=string access=read-only Displayed(tab/group)=Last Tx Port |
| peerMasterAlarm |
type=ptp.PeerMasterAlarmBits access=read-only Displayed(tab/group)=Master GM Alarms (/Peer Master Status) |
| peerMasterBackup |
It shows whether a particular this port is a backup when the clock is using GNSS.
type=boolean access=read-only default=false Displayed(tab/group)=Backup Source (/Peer Master Status) |
| peerMasterClockId |
type=string access=read-only Displayed(tab/group)=Master Clock ID (/Peer Master Status) |
| peerMasterClockStepType |
type=ptp.Alu1588PtpClockStepType access=read-only Displayed(tab/group)=Master Clock Step Type (/Peer Master Status) |
| peerMasterClockStepsRemoved |
type=long access=read-only Displayed(tab/group)=Master Clock Steps Removed (/Peer Master Status) |
| peerMasterGMAccuracy |
type=long access=read-only Displayed(tab/group)=Master GM Accuracy (/Peer Master Status) |
| peerMasterGMClass |
type=long access=read-only Displayed(tab/group)=Master GM Class (/Peer Master Status) |
| peerMasterGMClockPriority1 |
type=long access=read-only Displayed(tab/group)=Master GM Clock Priority 1 (/Peer Master Status) |
| peerMasterGMClockPriority2 |
type=long access=read-only Displayed(tab/group)=Master GM Clock Priority 2 (/Peer Master Status) |
| peerMasterGMVariance |
type=long access=read-only Displayed(tab/group)=Master GM Variance (/Peer Master Status) |
| peerPortState |
type=ptp.TmnxPtpPortState access=read-only default=notApplicable Displayed(tab/group)=Peer Port State |
| peerPriority |
type=long default=128 minimum=1 maximum=255 Displayed(tab/group)=Peer Priority |
| peerRemoteMaster |
type=boolean access=read-only default=false Displayed(tab/group)=Peer Remote Master |
| peerRemoteSiteId |
type=string access=read-only default=0.0.0.0 maximum=64 Displayed(tab/group)=Peer Remote Site ID |
| peerRemoteSlave |
type=boolean access=read-only default=false Displayed(tab/group)=Peer Remote Slave |
| peerRxTimeStampPoint |
type=ptp.PtpTimeStampReferencePoint access=read-only Displayed(tab/group)=Rx Timestamp Point |
| peerSyncCertainty |
It indicates the value of the
synchronizationUncertain flag of the Announce message header recieved
or transmitted by the peer.
type=ptp.SyncCertaintyState access=read-only default=unknown Displayed(tab/group)=Peer Sync Certainty |
| peerTxTimeStampPoint |
type=ptp.PtpTimeStampReferencePoint access=read-only Displayed(tab/group)=Tx Timestamp Point |
| portIndex |
type=int default=0 |
| ptp.IEEEPTPPeerUnicast-Set |
type=Children-Set |
| ptpPeerSyncInterval |
type=int default=-6 minimum=-6 maximum=0 units=log base 2 seconds Displayed(tab/group)=Peer Sync Interval |
| routerInfo |
Shows the Router Id of the Site (Base or VPRN)
type=string access=read-only default=Base(1) Displayed(tab/group)=Router |
| sep1BidirMonitoredIpPathPointer |
Pointer to the bidirectional monitored IP path for the Peer IP Address and Source Entry Point 1.
type=Pointer default= Displayed(tab/group)=Source Entry Point 1 Bidirectional IP Path Monitor (Path Monitoring/Source Entry points) |
| sep1MonitoredIpPathPointer |
Pointer to the monitored IP path for the Peer IP Address and Source Entry Point 1.
type=Pointer default= Displayed(tab/group)=Source Entry Point 1 IP Path Monitor (Path Monitoring/Source Entry points) |
| sep2BidirMonitoredIpPathPointer |
Pointer to the bidirectional monitored IP path for the Peer IP Address and Source Entry Point 2.
type=Pointer default= Displayed(tab/group)=Source Entry Point 2 Bidirectional IP Path Monitor (Path Monitoring/Source Entry points) |
| sep2MonitoredIpPathPointer |
Pointer to the monitored IP path for the Peer IP Address and Source Entry Point 2.
type=Pointer default= Displayed(tab/group)=Source Entry Point 2 IP Path Monitor (Path Monitoring/Source Entry points) |
| sep3BidirMonitoredIpPathPointer |
Pointer to the bidirectional monitored IP path for the Peer IP Address and Source Entry Point 3.
type=Pointer default= Displayed(tab/group)=Source Entry Point 3 Bidirectional IP Path Monitor (Path Monitoring/Source Entry points) |
| sep3MonitoredIpPathPointer |
Pointer to the monitored IP path for the Peer IP Address and Source Entry Point 3.
type=Pointer default= Displayed(tab/group)=Source Entry Point 3 IP Path Monitor (Path Monitoring/Source Entry points) |
| sep4BidirMonitoredIpPathPointer |
Pointer to the bidirectional monitored IP path for the Peer IP Address and Source Entry Point 4.
type=Pointer default= Displayed(tab/group)=Source Entry Point 4 Bidirectional IP Path Monitor (Path Monitoring/Source Entry points) |
| sep4MonitoredIpPathPointer |
Pointer to the monitored IP path for the Peer IP Address and Source Entry Point 4.
type=Pointer default= Displayed(tab/group)=Source Entry Point 4 IP Path Monitor (Path Monitoring/Source Entry points) |
| siteId |
type=string access=read-only default=0.0.0.0 maximum=50 Displayed(tab/group)=Peer Site ID |
| sourceEntryPointPointer |
Pointer to the source entry point.
type=Pointer default= Displayed(tab/group)=Source Entry Point |
| Properties inherited from ManagedObject |
|---|
| actionMask, children-Set, deploymentState, isFaultSquelched, name, objectFullName, selfAlarmed |
| Methods |
|---|
deployer
: Deployer - the deployment state
synchronousDeploy
: boolean - (Optional) Specify whether to block until the changes have been fully deployed to the network. A value of "true" means to block. A value of "false" means to return immediately. Default: false (asynchronous)
clearOnDeployFailure
: boolean - (Optional) Specify whether to clear any failed deployers. A value of "true" means to clear. A value of "false" means to leave the failed deployer. Default: false
deployRetries
: int - (Optional) The number of times to attempt re-deployment during synchronous deployment. This parameter is meaningless in the asynchronous case. Default: 0
deployRetryInterval
: long - (Optional) The number of milliseconds to wait between deployment retries. This parameter is meaningless in the asynchronous case. Default: 0
taskDescription
: string - (Optional) A user friendly description of what the operation does. This information will be used by the task manager.
instanceFullName
: string - the full name of the object.
continueOnFailure
: continueOnFailure - (Optional) Continue processing requests in this stream if an exception occurs, unless the request is invalid. Default: false
ptp.IEEEPTPPeer.resetPTPCountersException