| Overview | Package | Class | Deprecated | Help |
| Properties | |
|---|---|
| administrativeState |
Specifies the administrative state of the MC ring. It is
"down" by default.
type=multichassis.McRingAdministrativeState default=tmnxOutOfService Displayed(tab/group)=Administrative State (State) |
| controlPathB |
Indicates if this node is controlling the Path B or not.
A ring connection is sub-divided into 2 'channels', Path A
and Path B. In normal operating condition, when the value
of operationalState is equal to 'connected (5)', one peer
system controls Path A, the other Path B, according to an
arbitrary tie-breaker rule based on the peer systems' IP address.
Otherwise, both peer systems control Path A and Path B.
type=boolean access=read-only Displayed(tab/group)=Control Path B |
| failureReason |
Specifies the reason why the MC ring operational state is one of
the failed states.
type=string access=read-only default= minimum=0 maximum=80 Displayed(tab/group)=Failure Reason (State) |
| ibrccAdministrativeState |
Specifies the administrative state of the debounce mechanism on the transition of
the operational state of the inband control connection from 'connected (2)' to 'broken (3)'.
type=multichassis.McRingAdministrativeState default=tmnxInService Displayed(tab/group)=Administrative State (/In-Band Control Connection) |
| ibrccDebounceMaxTime |
Specifies the maximum debounce time on the transition of the operational state of the inband control
connection from 'connected (2)' to 'broken (3)'
type=int default=10 minimum=5 maximum=200 units=seconds Displayed(tab/group)=Debounce Max Time (/In-Band Control Connection) |
| ibrccDebounceStart |
Indicates the sysUpTime the last time that the debounce timer
was started on the transition of the operational state of the
inband control connection from 'connected (2)' to 'broken (3)'.
If the debounce timer was never started, this object contains
a zero value.
type=Date access=read-only Displayed(tab/group)=Debounce Start Time (/In-Band Control Connection) |
| ibrccDebounceTime |
Indicates the value of the debounce timer at the time
indicated by the value of ibrccDebounceStart.
Data traffic may have been dropped starting from the
time indicated by ibrccDebounceStart during the interval
indicated by ibrccDebounceTime.
type=Time access=read-only units=milliseconds Displayed(tab/group)=Debounce Interval (/In-Band Control Connection) |
| ibrccDestinationIpAddr |
Specifies the destination IP Address used in the
in-band control connection. The ring can not be turned
up without this property being configured correctly.
It should be the IP address of the peer BFD interface.
type=InetAddress default=0.0.0.0 Displayed(tab/group)=Destination IP Address (/In-Band Control Connection) |
| ibrccDestinationIpAddrType |
Specifies the type of destination IP Address used in the
in-band control connection.
type=rtr.InetAddressType default=ipv4 |
| ibrccInterfaceName |
Specifies the name of the interface which is used for the in-band
control connection. The ring can not be turned up without
this property being configured correctly. The interface
must be either IES or VPRN interface with BFD enabled.
type=string default= minimum=0 maximum=32 Displayed(tab/group)=Interface Name (/In-Band Control Connection) |
| ibrccOperationalState |
Specifies the operational state of the in-band control
connection.
type=multichassis.IbrccOperationalState access=read-only default=unknown Displayed(tab/group)=Operational State (/In-Band Control Connection) |
| ibrccServiceId |
Specifies the service id when the interface used for
in-band control connection belongs to a VPRN/IES interface.
type=long default=0 minimum=0 maximum=2147483647 Displayed(tab/group)=Service ID (/In-Band Control Connection) |
| ibrccServiceName |
Specifies the service name when the interface used for
in-band control connection belongs to a VPRN/IES interface.
type=string access=read-only Displayed(tab/group)=Service Name (/In-Band Control Connection) |
| ibrccSourceIpAddr |
Specifies the source IP Address used in the
in-band control connection.
type=InetAddress access=read-only default=0.0.0.0 Displayed(tab/group)=Source IP Address (/In-Band Control Connection) |
| ibrccSourceIpAddrType |
Specifies the type of source IP Address used in the
in-band control connection.
type=rtr.InetAddressType access=read-only default=ipv4 |
| mcSyncPortId |
Indicates the Multi Chassis Sync Port Id .
type=long access=read-only |
| mcSyncPortName |
Indicates the Multi Chassis Sync Port Name .
type=string access=read-only Displayed(tab/group)=Multi-Chassis Sync Port |
| multichassis.ExcludeVlanRange-Set |
type=Children-Set |
| multichassis.MultiChassisRingNode-Set |
type=Children-Set |
| multichassis.NegotiatedExcludeVlanRange-Set |
type=Children-Set |
| multichassis.NegotiatedPathBVlanRange-Set |
type=Children-Set |
| multichassis.PathBVlanRange-Set |
type=Children-Set |
| numberOfExcludeVlanRanges |
Indicates the number of the excluded VLAN Ranges configured
under this multi chassis ring.
type=int access=read-only default=0 minimum=0 maximum=4094 |
| numberOfNegotiatedExcludeVlanRanges |
Indicates the number of the excluded VLAN Ranges configured
under this multi chassis ring.
type=int access=read-only default=0 minimum=0 maximum=4094 |
| numberOfNegotiatedPathBVlanRanges |
Indicates the number of the Path B VLAN Ranges configured
under this multi chassis ring.
type=int access=read-only default=0 minimum=0 maximum=4094 |
| numberOfPathBVlanRanges |
Indicates the number of the Path B VLAN Ranges configured
under this multi chassis ring.
type=int access=read-only default=0 minimum=0 maximum=4094 |
| operationalState |
Specifies the operational state of the MC ring.
type=multichassis.McRingOperationalState access=read-only default=unknown Displayed(tab/group)=Operational State (State) |
| peerIpAddress |
Indicates the IP Address of redundant peer.
type=InetAddress access=read-only default=0.0.0.0 |
| peerIpAddressType |
Indicates the IP Address type of redundant peer.
type=rtr.InetAddressType access=read-only default=ipv4 |
| peerMcRingPointer |
A pointer pointing to the peer Multi Chassis Ring on
peer node. This property is used for navigating to peer
mc ring and for alarm listing.
type=Pointer access=read-only default= Displayed(tab/group)=Peer Multi-Chassis Ring |
| peerSiteId |
Indicates the system IP Address of redundant peer router.
DEPRECATED: 7.0.R4 - Use peerIpAddress instead type=InetAddress access=read-only default=0.0.0.0 |
| ringName |
Specifies the name of the ring which is the MC sync tag configured on PeerSynchronizationPort.
type=string access=read-create minimum=1 maximum=32 Mandatory on create Displayed(tab/group)=Ring Name |
| siteId |
Indicates the system IP Address of this router.
type=string access=read-only default=0.0.0.0 maximum=50 |
| Properties inherited from ManagedObject |
|---|
| actionMask, children-Set, deploymentState, isFaultSquelched, name, objectFullName, selfAlarmed |
| Supported Network Elements | |
|---|---|
| 7750 SR | |
| 7705 SAR Gen 2 | |
| 7705 SAR Hm | |
| 7450 ESS | |
| DC VSC | |
| DC 7850 | |
| DC 210 | |
| DC VSA8 | |
| 7950 XRS | |
| 7250 IXR | Supported from 19.5.R1 until 21.2.R1 |
| Product Specifics | |
| 7250 IXR 20.0 | |
| 7450 ESS 20.0 | |
| 7450 ESS 21.0 | |
| 7450 ESS 22.0 | |
| 7450 ESS 23.0 | |
| 7450 ESS 24.0 | |
| 7450 ESS 25.0 | |
| 7705 SAR Gen 2 25.0 | |
| 7705 SAR Hm 20.0 | |
| 7705 SAR Hm 21.0 | |
| 7705 SAR Hm 22.0 | |
| 7705 SAR Hm 23.0 | |
| 7705 SAR Hm 24.0 | |
| 7705 SAR Hm 25.0 | |
| 7750 SR 20.0 | |
| 7750 SR 21.0 | |
| 7750 SR 22.0 | |
| 7750 SR 23.0 | |
| 7750 SR 24.0 | |
| 7750 SR 25.0 | |
| 7950 XRS 20.0 | |
| 7950 XRS 21.0 | |
| 7950 XRS 22.0 | |
| 7950 XRS 23.0 | |
| 7950 XRS 24.0 | |
| 7950 XRS 25.0 | |
| DC 210 20.5 | |
| DC 210 5.0 | |
| DC 210 6.0 | |
| DC 7850 20.0 | |
| DC 7850 5.0 | |
| DC 7850 6.0 | |
| DC VSA8 5.0 | |
| DC VSA8 6.0 | |
| DC VSC 20.0 | |
| DC VSC 5.0 | |
| DC VSC 6.0 | |